VILINICE SS01 50W Sound Bar User Manual

MODEL : SSO1FIVE LANGUAGES MANUAL

US/EU: 1-888-965-5888 UK: 44 20 3885 0918US: [email protected]EU: [email protected]UK: [email protected]@VILINICEScan this QR code to activate the 24-month warranty and get a free gift within 7 days after receiving this item.

https://vilinicelife.com/warranty

ForewordThank you very much for purchasing the VILIN ICE SSO1 soundbar. Please read the user instructions carefully before using this product.Attention:The product should always be connected to an AC outlet with a protective earth connection.Do not pull the power plug with wet hands, or it may risk electric shock.Do not expose this machine to rain or damp places to avoid fire or electric shock.Do not throw, hit, or shake the soundbar to avoid damaging the internal circuit board.Do not disassemble or repair this product by yourself. If you have any questions, please contact the after-sales service personnel.

Right Button 

Connector

 

A. Short press to switch on/mode switch;B. Long press to turn off Short press to play/pause;C.Long press to disconnect Bluetooth Short press next music;D. Long press Volume up Short press previous music;E. Long press Volume downF. [USB] USB Disk inG. [AUX] Analog Audio In (stereo 3.5mm) [OPTICAL] Digital Optical InH. [DC] Power Port

Know your remote

Insert 2 AAA batteries before using the remote control. Please aim the remote control at the LED light on the main unit when using the remote control. Does not compatible with the TV remote and universal remote.

What’s in the Box

Connecting Electrical Power

Make sure to rest the AC/DC adapter flat on a table or the floor. If you place the AC/DC adapter so that it is hanging with the AC cord input facing upwards, water or other foreign substances could enter the Adapter and cause the Adapter to malfunction.

Note: When disconnecting the power cable of the DC/AC power adapter from a wall outlet, pull the plug. Do not pull the cable. Do not connect this unit or other components to an AC outlet until all connections between components are completed.

How to use the soundbar

1. Power on and off

After connecting the power cord, the red LED indicator on the soundbar is always on, and it enters the standby state.Short press the button on the soundbar, or press the buttons on the remote control to turn on the system. You will hear the voice prompt “Power On” then the voice prompt “Bluetooth mode” and automatically enter the Bluetooth mode, the LED indicator will be BLUE.Long press the button on the soundbar or press the button on the remote control, the soundbar enters the standby state, and you will hear the voice prompt “Power off’.2. Select modeShod press the button on the soundbar or the button on the remote control to switch to Bluetooth mode, optical mode, and AUX mode.( When switching between different modes, there will be voice prompts for “Bluetooth mode”, “optical mode”, and “AUX mode”, and the indicators on the soundbar will behave differently.)

Connect Bluetooth device

Bluetooth connection

1. Press the BT button on the remote control to switch to Bluetooth mode and the voice prompt “Bluetooth mode”.
2. Turn on Bluetooth on the device and select “SS01” to connect in the list. When the connection is successful, you will hear the sound of “Ding Dong”, and the blue indicator light on the soundbar is always on.
3. Long press the button on the soundbar for 3 seconds to disconnect the connected Bluetooth device, the soundbar enters the waiting state for connection, and the blue indicator light flashes.

NOTE: The soundbar cannot connect more than one Bluetooth device at a time When the soundbar’s sound volume is turned to the maximum or minimum, there will be a prompt sound. Please makes sure there are no other active Bluetooth devices within range and the soundbar is within 32ft/10nn of your device. Before starting to play via Bluetooth, please lower the volume to a moderate level.

Connect with TV

Method 1. Connecting using an Optical cable

1. Connect the DIGITAL AUDIO IN(OPTICAL) jack on the Soundbar to the Optical OUT jack of the TV with a digital optical cable.
2. Press the button to switch to Optical mode, then the voice announcement prompts”Optical Mode”. 3. Set the TV’s audio output to”PCM”. (More information on PCM page) Optical out

NOTE: When you use the OPTICAL connection, please take care to remove the protective sleeves at both ends of the cable before connecting.

Method 2. Connecting using an AUX cable

1. Connect the AUX Jack on the Soundbar to the headphone jack of the TV with a 3.5mm cable. 2. The Soundbar will automatically switch to AUX mode, then the voice announcement prompts”AUX Mode”.

Method 3. Connecting using an RCA audio cable

1. Using the RCA audio cable, connect the black end to the AUX port of the soundbar, and the red and white connectors on the other end are connected to the red and white ports of the TV respectively.
2. The Soundbar will automatically switch to AUX mode, then the voice announcement prompts “AUX Mode”.

Method 4. Connecting a USB

1. Connect your USB device to the USB jack on the Soundbar.
2. The Soundbar will automatically switch to USB mode, then the voice announcement prompts “USB Mode”, and play the music in the USB flash drive.

Note: USB pod also for firmware upgrade

Setting “PCM” on your TV

When all cables are connected properly, and LED indicator lights properly, if there is no sound from tv or Soundbar, please set your tv as below:

1. Press “Menu” on the tv’s remote control
2. Press the arrow keys on the remote to scroll to “Audio Settings”.
3. Press”OK” on the remote control.
4. Scroll to “Advanced Audio” and press “OK.” Some televisions may not have an “Advanced Audio” menu and may list various audio settings instead.
5. Scroll to “Audio Output Mode” or “Digital Audio Output Mode” and press “OK”.
6. Scroll until “PCM” is displayed as the current audio output.
7. Press “OK” to save the settings.Note: Some brand TVs may be different in Digital Audio Output Settings, please check your TV’s manual. Some TVs do not have output function, only input, then audio cannot be connected.

Troubleshooting

 

Why is the unit not turning on?
Please check and make sure the power cord is correctly connected to a power source.	Reconnect the power cord
Why the remote control does not work?
Replace with new batteries.	Aim the remote control at the LED light on the main unit.
Why there is no sound in the soundbar?
Please make sure that the TV has an audio output interface.	Press the Mute button to switch on the sound.
Check to make sure the audio cable is correctly connected.	Please set the TV to the digital audio output and select PCM output.
Why the sound is distorted?
Adjust to the corresponding music, movie, news mode according to the specific scene.
Why does the soundbar reach its maximum volume when it is turned on?
Lower the volume of the audio source device before turning on the soundbar.	Make the soundbar not connected to any audio source device, decrease the volume via the remote control.

UK: [email protected]