VisionTek SoundCube Waterproof Bluetooth Speaker 901313/901323 User Manual

Table of Contents

VisionTek SoundCube

Waterproof Bluetooth Speaker

USER MANUAL

BASIC OPERATION

POWER BUTTON/ MULTI-FUNCTION BUTTON

Power On/Off – Long press the “” button for 2-3 secIncoming Call – Short press “” to answerDouble press “” to refuseCall/Hang Up – During a call, short press “” to hang upPause / Play – Short press “” when playing music to pause or play

+ / – Volume buttons/Previous & Next track Buttons

Short press – to turn volume down, Long press the – for the previous track / stationShort press + to turn volume up, Long press the + for the next track / station

Mode button

Short press to switch between Bluetooth/ FM/ SD cardLong press to search radio during FM mode

How to operate the FM function?

Short press “” button to switch to FM mode, There will be a prompt tone indicating “FM mode”. Long Press “” to begin searching channels, press “” button to pause channel searching. Long press “” to cycle through channels found earlier.

INTERFACE INSTRUCTIONS

BLUETOOTH CONNECTION

Step 1 Power On

Long press “” button for 2-3 seconds to power on the speaker. You will hear an alert tone. The speaker will enter Bluetooth pairing mode notated by the blue indicator LED blinking.

Step 2 Pair Device

Find “SOUNDCUBE” in your Bluetooth list on your mobile phone, tablet or PC.

Step 3 Pairing successfully

The LED indicator on the speaker will shine blue once the device is paired followed by a beep. The device is now paired and you can start enjoying your SOUNDCUBE

TWS (TRUE WIRELESS STEREO) PAIRING

Turn on the two speakers, the blue LED indicators will begin to flash. Shortpress the “” on one of the speakers to enter TWS pairing mode. An indicating sound will play and the blue LED indicator light will begin to blink. After 1-2 seconds, the speakers will automatically pair. Once paired, an alert tone will play and the blue LED light will stay on. Once TWS pairing is complete, open up the Bluetooth settings on your device and select “SOUNDCUBE” from the list of devices. This will pair the speakers to your device at the same time. Short press the “” on either speaker to disconnect the TWS pairing. The blue LED indicator will turn off once disconnected.

NOTE: For TWS pairing, connect the two speakers together first, then connect to your smartphone / Bluetooth device.

PRODUCT SPECIFICATION

FREQUENTLY ASKED QUESTIONS

Q: What kind of charger should I use for the speaker?

A: All common USB to USB micro chargers can be used, we recommend chargers above 5V/0.5A.

Q: What if there is static or a distortion of sound while playing?

A: The speaker can be normally used up to 10m with no obstruction. If it is over 10m or with an obstruction, there might be noise or discontinuous sound.

Q: Why does the speaker shut down automatically when it is on?

A: When there is no bluetooth device paired for 10 minutes, the speaker will automatically shut down to reduce power consumption.

Q: The speaker cannot connect the once-paired cellphone.

A: First, forget the device from the cellphone’s Bluetooth list and then short press the power button twice quickly to restart paring

Q: The speaker cannot be turned on in a normal situation.

A: Please charge the speaker and try in a few minutes.

VisionTek SoundCube Waterproof Bluetooth Speaker 901313/901323 User Manual – VisionTek SoundCube Waterproof Bluetooth Speaker 901313/901323 User Manual –

[xyz-ips snippet=”download-snippet”]

Posted

2023-01-10

VisionTek

admin

Tags:

901313, 901323, SoundCube, VisionTek, Waterproof Bluetooth Speaker