Vive LVA2017 Massage Chair with Lift Owner’s Manual

MASSAGE CHAIR WITH LEFTOwner’s manual LAV20017

WHAT’S IN E PACKAGE

  • lx Recliner Frame
  • lx Backrest
  • lx Massage Remote
  • lx Recline/Lift Remote
  • lx Massage Power Adapter
  • lx Transformer
  • lx Wall Power Cord
  • lx Power Extension Cord

massage remote

PRODUCT OVERVIEW

Your Vive Massage and Power Lift Recliner provides heat and massage functions for ultimate relaxation as well as power recline and lift functions for users with restricted or limited mobility.We are constantly answering questions and recording helpful videos to make using your Massage and Power Lift Recliner as easy as possible. Throughout the manual, we will include OR codes and links to important videos that you can visit to help you.

To see all of the FAOs in one place visit vhealth.link/lin

ASSEMBLY INSTRUCTIONS

To see all of the FAQs in one place visit vnealth.link/neq

 

  1. Position the Recliner Frame on the floor where the Recliner is to be assembled. It should be on a flat surface and within reach of two (2) power outlets.
  2. Attach the Backrest to the Recliner Frame by lining up the metal grooves on the Backrest with the brackets on the inside of the Frame. Make sure that the Backrest slides completely down over the brackets.
  3. Peel up the flap on the back of the Frame to access the control wires.
  4. Locate two (2) white wires and connect them together. This connects the electronics for the Backrest and the Frame so that they work together.
  5. Locate the large black wire on the Frame, and attach the Recline/Lift Remote to it to connect the Recliner controls.
  6. Locate the small black wire on the base of the Frame, and connect the Recliner Transformer wire to it. Insert the Recliner  Power Cord into the port on the Transformer, and plug the other end into a power outlet.
  7. Insert Massage Power Adapter into the corresponding black wire on the back of the Frame. Plug the other end into a  power outlet.
  8. Connect the Massage Remote to the large black cable on the back of the Frame.
  9. Close the flap on the back of the Frame, making sure to smooth out the fabric fastener strip at the bottom.

MASSAGE CONTROLS

To use the massage features of the Recliner, simply sit down and press the POWER button. The POWER light will illuminate, and the Recliner will begin a basic massage program for fifteen (15) minutes before turning itself off. However, the  Recliner has many massage features available, and all of them can be easily controlled using the Massage Remote.

COMPONENT

DESCRIPTION

POWER button/indicator Turns the Massage Recliner on at LOW intensity in NORMAL mode across all body zones with the heat on.The massage function will run continuously for fifteen (15) minutes before automatically turning off. To resume operation, just press this button again.Press this button again to turn all massage features off.
INT button/HIGH and LOW indicators Switches between the Recliner’s two (2) intensity levels (high and low) when pressed.
MODE button and indicators Switches between the Recliner’s five (5) operating modes when pressed:NORMAL mode: a firm, vibrating massageAUTO mode: a random pulsing massage for all zones WAVE mode: a gradual, side-to-side vibrating massage PRESS mode: a rapid, tapping massagePULSE mode: a deep, tapping massage
Zone buttons and indicators Each of the red buttons turns the massage feature on and off for the named zone (BACK LUMBAR, and THIGHS). The indicators will illuminate to show which zones are on.

RECLINE/LIFT CONTROLS

Your Recliner also has power recline and lift functions for those with limited mobility.

COMPONENT DESCRIPTION
Recline button Press and hold this button to recline the back and raise the footrest. Release the button at any time to freeze the Recliner where it is.
Lift button Switches between the Recliner’s two (2) intensity levels (high and low) when pressed.
Power Indicator Light Turns on whenever either the [Recline] or [Lift] buttons are pressed to show that power is being supplied to that function.

MAINTENANCE

The only maintenance required for your Massage and Power Lift Recliner is to clean it occasionally with a damp sponge using a mild detergent. Make sure to unplug both the massage and power lift features from the power source before cleaning. Pat it dry with a clean, dry cloth, and do not reconnect to a power supply or use the chair until the fabric is completely dry Do not use any abrasive or volatile cleaners, brushes, gasoline, glass furniture polish, paint thinner, or water hotter than 120°F.

TROUBLESHOOTING

This section includes some common problems and fixes for your Massage and Power Lift Recliner. If it isn’t operating like you think it should check here before contacting [email protected].

SYMPTOM PROBLEM CAUSE

REMEDY

Massagethe feature will not start. No Power Power Adapter installed incorrectly Securely insert the Power Adapter into the adapter port on the back of the Backrest and wall socket.
The massagefeature turns off unexpectedly. Loss of power Power Adapter installedincorrectly Securely insert the Power Adapter into the adapter port on the back of the Backrest and wall socket.
Autotimer turned the Massager off after fifteen (15) minutes Press the POWER button to start it back up again. Do not operate for more than thirty (30) minutes per session.
The massage feature Is not working for the THIGH zone. (located in the seat). No power to lower massagers Power Adapter installed incorrectly Check the red and white wire connections on the back of the Frame to make sure they are secure. These wires connect the massage power and controls to the lower massagers.
Recliner will not recline or lift No Power Power Adapter installed incorrectly Check all of the connections between the Recliner power cable, the  Transformer, and the Power  Cord to make sure the/re securely attached.
No Power Recline/Lift Remote installed incorrectly Check the connection between the Recline/Lift Remote and the Recliner to make sure it’s securely attached.

ADDITIONAL INFORMATION AND SAFETY WARNINGS

  • Sit down on the Recliner gently, rather than dropping down into it. Never sit on the armrests either. Failure to follow these warnings can tip the Recliner and cause harm or damage.
  • Unplug the Recliner when not in use and while cleaning. Do not operate the Recliner if any of the cords or cables are damaged, frayed, or exposed.
  • The footrest is not a seat and is not designed to support a person’s full Even children should never sit on it when open.
  • This device is intended for adult indoor use only Children should only use it in the presence of direct adult supervision. Do not use outdoors.
  • Be aware of the presence of children and pets when reclining or lifting the Recliner so that they do not get caught in the moving hinges and Do not allow them to play on or around the Recliner when it is in a reclined position.
  • Only one (1) adult should use the Recliner at a time; it is not intended for multiple persons. The weight limit for the Recliner is 300 lb.
  • Do not use the Recliner if you have severe heart problems, high blood pressure, or cerebral thrombosis, if you have weak bones or are in a wasted state, or if you are pregnant without first consulting your doctor.
  • Individuals with pacemakers should not use the Recliner.
  • If you experience muscle or joint pain during or after using the Recliner, discontinue use and consult your physician. Persistent pain could be a symptom of a more serious condition.
  • Do not use the Recliner in areas of excessive heat or humidity. Keep away from direct heat sources or air conditioning units as this can damage the fabric.

TECHNICAL SPECIFICATIONS

  • Rated Voltage:110V
  • Rated Frequency: 60Hz
  • Overall Height: 38″
  • Total Length (Unreclined): 35.5″
  • Total Length (Reclined): 63″
  • Total Width (Outside Armrest to Outside Armrest): 26″
  • Seat Width:18″
  • Seat Depth: 20.5″
  • Seat Height:17.75″
  • Weight: 88Ibs
  • Materials: 90% poly -10% nylon

WARNING: No modification of this equipment from its original specifications is allowed.

WARRANTY INFORMATION

report this ad

[xyz-ips snippet=”download-snippet”]


Posted

in

by