VIVO DESK-V000VO Oak Desk Riser Instruction Manual
SKU: DESK-V000VO
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
www.vivo-us.comChat live with an agent!
309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
- (x1) Desktop
- (x2) Extended Feet
- (x10) M5x10
- (x1) Keyboard Brackets
- (x1) Cable Clip
- (x2) Ziptie
- (x1) Keyboard Tray
WARNING
PINCH POINT
- DO NOT place hands on or near support bars.
- Moving parts can crush and cut Pinch points are created during lifting and lowering the worksurface.
- Failure to follow these instructions may result tn serious personal Injury.
DO NOT EXCEED WEIGHT CAPACITY.Failure to do so may result in serious injury.
TOOLS NEEDED
- Phillips Screwdriver
- Scissors
ASSEMBLY STEPS
STEP 1
Carefully remove the desktop (A) from the packaging
WARNING: Impact Hazard! Moving Parts can Crush and Cut!
STEP 2
Flip the desktop (A) upside down, then attach the extended feet (B) to the frame using M5x10mm screws (C).
STEP 3
Press the handles on each side and lift the desktop (A).
STEP 4
Mount brackets (D) to keyboard tray (G) using M5x10mm screws (C).
STEP 5
Hang assembled keyboard tray onto pre-installed knobs, and tighten knobs to secure.
NOTE: Make sure the keyboard brackets are curving towards the user, not towards the inside of the desk.
STEP 6
Place monitor, laptop and other items on desk surface
STEP 7
Attach cable clip (E) to desk to manage keyboard and mouse cables.
STEP 8
Manage cables using zip ties (F).
STEP 9
If locks are not releasing properly to change desk height, adjust the position of the black tube containing the steel release cable. Turn the nuts at the end of the tube just behind the handle as shown, moving the tube away from the handle until the cable once again has proper tension, then tighten the nuts.
Caution
- Keep monitor and laptop base fully on the desktop.
- Follow the cable routing instructions to avoid the potential to pinch cables.
- Leave enough slack in cable to allow for full range of vertical motion (J.5″ / 38 cm).
- Raise desktop slowly to keep items stable.
Failure to follow these instructions may result in property damage and/or personal injury.
Love your new VIVO setup and want to share?Tag us in your photo! @vivo_us
Open Monday – Friday 7:00am – 7:00pm CST,our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
AVG. RESPONSE TIME (within office hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within office hrs): < 15 M
AVG. RESOLUTION TIME (within office hrs): 5M 4S
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT:www.vivo-us.com
References
[xyz-ips snippet=”download-snippet”]