vtech B08TR1FCH5 3-in-1 Tummy Time Roll-a-Pillar
INTRODUCTION
Thank you for purchasing the 3-in-1 Tummy Time Roll-a-Pillar™!Enjoy three ways to play as your baby progresses from tummy time play to creeping and crawling with the cute caterpillar. Four play modes, soft fabrics, a baby-safe mirror, a rattle and a teething toy add to the fun and learning.
INCLUDED IN THIS PACKAGE
- 3-in-1 Tummy Time Roll-a-Pillar™
- Parents’ guide
WARNINGAll packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties and packaging screws are not part of this toy, and should be discarded for your child’s safety.NOTEPlease keep this parents’ guide as it contains important information.
GETTING STARTED
Battery Removal and Installation
- Make sure the unit is turned Off.
- Find the battery cover located inside the pillow on the side of the unit. Use a screwdriver to loosen the screw and then open the battery cover.
- Remove old batteries by pulling up on one end of each battery.
- Install 2 new AAA batteries following the diagram inside the battery box. (For best performance, alkaline batteries or fully charged Ni-MH rechargeable batteries are recommended).
- Replace the battery cover and tighten the screw to secure.
IMPORTANT: BATTERY INFORMATION
- Insert batteries with the correct polarity (+ and -).
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
- Only batteries of the same or equivalent type as recommended are to be used.
- Do not short-circuit the supply terminals.
- Remove batteries during long periods of non-use.
- Remove exhausted batteries from the toy.
- Dispose of batteries safely. Do not dispose of batteries in fire.
RECHARGEABLE BATTERIES:
- Remove rechargeable batteries from the toy before charging.
- Rechargeable batteries are only to be charged under adult supervision.
- Do not charge non-rechargeable batteries.
INSTRUCTIONS FOR WASHING
Please remove the electronic module from the pillow before cleaning.
- To remove the electronic module, open the hook-and-loop closure on the end of the pillow and take out the electronic module.
- Handwash the pillow and let it air-dry.
- Insert the curved end of the electronic module first, nestling it into the fabric pocket. Next, rotate the module in the fabric pocket 45 degrees towards the front of the caterpillar so that the curved end is towards the caterpillar’s face. Smooth thecloth around the electronic module, press it further into the caterpillar, then close the padded end and secure the hook-and-loop closures
PRODUCT FEATURES
- On/Off/Volume SelectorTo turn the unit On, slide the On/Off/ Volume Selector to the Low volume position or the High volume position. You will hear a song, a fun phrase, and playful sounds. To turn the unit Off, slide the On/ Off/Volume Selector to the Off position.
- Easy to TransformUnroll the Playmat to change from roller to tummy time toy, or roll up the Playmat to use it for rolling play.
- Automatic Shut-OffTo preserve battery life, the 3-in-1 Tummy Time Roll-a-Pillar™ will automatically shut off after approximately 45 seconds without input. The unit can be turned on again by pressing any button.
NOTE: This product is in Try-Me mode in the packaging. After opening the package, turn the 3-in-1 Tummy Time Roll-a-Pillar™ off and on again to proceed with normal play. If the unit repeatedly powers down while playing, please install a new set of batteries.
ACTIVITIES
- Mode ButtonsPress one of the four Mode Buttons to trigger playful responses. Pressing the Music Button plays a variety of melodies, while pressing the Tree Button plays nature sounds. Press the Caterpillar Button to hear engaging phrases and songs, and press the Happy Face Button to hear playful sounds. When a melody or a song is playing, moving the pillow activates the motion sensor, which adds fun sounds on top of the melody or song.
- Motion SensorMove or roll the pillow to activate the Motion Sensor and hear fun sounds, playful phrases and short tunes. The light will flash with the sound.
- Removable Play PiecesProp up the mirror or play with the teether toy or rattle for added fun.
MELODIES
- A-Tisket, A-Tasket
- Diddle, Diddle Dumpling
- Bingo
- Did You Ever See a Lassie?
- Aiken Drum
- Hickory, Dickory Dock
- Humpty Dumpty
- Little Miss Muffet
- London Bridge Is Falling Down
- Mary Had a Little Lamb
- Muffin Man
- Old MacDonald
- One, Two, Buckle My Shoe
- Skip to My Lou
- Teddy Bears’ Picnic
SONG LIST
- Song 1Peek-a-boo, peek-a-boo, I see you.I see a fawn and an owl too.
- Song 2I’m a tickly, tickly caterpillar,I crawl, I creep, I wiggle.I giggle all day when we get to play,Oh! how I love you!
- Song 3Crawling here, crawling there, crawling everywhere!Let’s wiggle, wiggle all around, wigglin’ up and down!
CARE & MAINTENANCE
- Keep the unit clean by wiping it with a slightly damp cloth.
- Keep the unit out of direct sunlight and away from any direct heat sources.
- Remove the batteries if the unit will not be in use for an extended period of time.
- Do not drop the unit on hard surfaces and do not expose the unit to moisture or water.
- The pillow can by surface washable or hand washed. Please remove the electronic module from the pillow before cleaning.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions, please follow these steps:
- Please turn the unit Off.
- Interrupt the power supply by removing the batteries.
- Let the unit sit for a few minutes, then replace the batteries.
- Turn the unit On. The unit should now be ready to play again.
- If the unit still does not work, install a new set of batteries.
IMPORTANT NOTE:If the problem persists, please call our Consumer Services Department at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, or by going to our website at vtechkids.com and filling out our Contact Us form located under the Customer Support link. Creating and developing VTech® products is accompanied by a responsibility that we take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to contact us with any problems and/or suggestions that you might have. A service representative will be happy to help you.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Visit our website for more information about our products, downloads, resources and more.vtechkids.comvtechkids.caRead our complete warranty policy online atvtechkids.com/warrantyvtechkids.ca/warranty
References
[xyz-ips snippet=”download-snippet”]