INSTALLATION MANUALArticulating Monitor Desk Stand
WARNING!If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.
TIP-OVER WARNINGSERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
- NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF THE MONITOR OR STAND.
- USE TIP-OVER RESTRAINT OR ANCHOR STAND TO WALL.
THE USE OF TIP-OVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE THE RISK OF TIP-OVER.SMALL PARTS- NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
Supplied Parts List
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USEDStep 1Place Pole A onto the top center hole of Base B , connect Pole A and Base B from the bottom using Bolt F and tighten with Allen Key 4mm H.
Step 2Put Arm C through Pole A, adjust the preferred height and tighten using Allen Key 6mm I.
Step 3Press Pole Cover G into the top hole of Pole A.
Step 4Step 4.1
Step 4.2aSelect M4x12 Bolt M-A or M5x12 Bolt M-C according to your TV/Monitor, connect VESA Plate D together with D5 Washer M-E into the mounting holes on the back of TV/Monitor, tighten with a screwdriver.(Screwdriver needed but not included)
Step 4.2bSelect M4x16 Bolt M-B or M5x16 Bolt M-D according to your TV/Monitor, connect VESA Plate D together with D5 Washer M-E, and Spacer M-F into the mounting holes on the back of TV/Monitor, tighten with a screwdriver.(Screwdriver needed but not included)
Step 5Put the assembled TV/Monitor onto the Arm C and ensure stability, connect the VESA Plate D using Bolt E and tighten it by hand.
Step 6Tighten/Loosen the side bolt of Arm C with Allen Key 6mm I, store Allen Keys in the Cable Management Clip Holder, guide the cable through the Cable Management Clip Holder.
Step 7Manually swivel, tilt or rotate the angle for the best operating environment.
Thank you for choosing us!We support the technology that brings your home to life.We offer high-quality products, professional customer service, and extensive technical support.If you have any questions, please contact us.
1-844-SATTLER (18447288537)
[email protected]
[xyz-ips snippet=”download-snippet”]