INSTALLATION MANUALSecurity Dummy Camera
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by an improper mounting, incorrect assembly, or inappropriate use.
TIPOVER WARNINGSERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND.• USE TIP-OVER RESTRAINT OR ANCHOR STAND TO WALL.THE USE OF TIP-OVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIP OVER.SMALL PARTS- NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
Supplied Parts List
Step 1 – Open the cap and insert 2 pcs AA batteries. (Batteries not included)
Step 2 – Put the cap back. Loosen the screw and rotate to the preferred angle, then tighten the screw.
Step 3 – Option AWood StudDrill holes at the marked positions. Place the Dummy Camera A over the marked screw locations. Insert Screws B into the mounting holes and tighten using a screwdriver.
Option B Concrete/Brick WallDrill holes at the marked positions. Insert the Anchors C into the mounting holes. Place the Dummy Camera A over the marked screw locations. Insert Screws B into the mounting holes and tighten using a screwdriver.
Thank you for choosing us!We support the technology that brings your home to life. We offer high-quality products, professional customer service, and extensive technical support.
If you have any questions,please contact us.