WALI Soundbar Wall Mount Installation Guide

INSTALLATION MANUALSpeaker Wall Mount Holder

SWM-EH-01B/SWM-EH-01WSWM-EH-02B/SWM-EH-02W

WARNING!If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.

TIPOVER WARNINGSERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND.
USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL.

USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE BUT NOT ELIMINATE RISK OF TIP OVER.SMALL PARTS- NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

Step 1Option A : Wood StudDrill holes at the marked positions. Place the Bracket over the marked screw locations. Insert Screws into the mounting holes and tighten using a screwdriver.

Option B : Concrete/Brick WallDrill holes at the marked positions. Insert the Anchors into the mounting holes. Place the Bracketover the marked screw locations. Insert Screwsinto the mounting holes and tighten using a screwdriver.Step 2Guide the Dot 2nd Gen to the bracket. Tie the power cord with Velcro Strap if needed.

Thank you for choosing us!

We support the technology that brings your home to life. We offer high-quality products, professional customer service, and extensive technical support.

If you have any questions, please contact us.1-844-SATTLER (18447288537)[email protected]www.walielectric.com