Waterpik XQP-633 Power Pulse Fixed Shower Head Instruction Manual
www.waterpik.com/shower-register
Thank you for purchasing this Waterpik® shower head. This booklet will give you the information to make installation easy and quick. You are close to enjoying a powerful and invigorating shower experience with your new Waterpik® shower head. You can view more information about Waterpik® shower head products at www.waterpik.com.Note: Pictures shown may not directly match your shower head.
TOOLS YOU MAY NEED
- Tools may be needed for removal of old shower head or tightening new shower head. Soft Cloth
PRIOR TO INSTALLATION
- Write down your model number in the allotted space above. (model number is found on the packaging near barcode). If you do not have the package you may find the model number on our website www.waterpik.com.
- Remove old shower head and remove all pipe tape as well.
- Ensure that the washer from the old shower is not connected to the pipe. Use a thin utensil to check inside the pipe for washers, such as a pencil or screw driver. Do not use your fingers.
- No tools needed for shower head installation.
INSTALLATION
(1) 1. Install fixed mount shower head by holding the shower head in position and threading the pivot ball nut onto the pipe by turning clockwise until it is snug. Hand tighten only.
OPERATION
Spray Selector: Spray Selector allows you to select from various spray patterns. Spray pattern is controlled by the small lever that rotates left and right.
WATER SAVING TRICKLE QUICK PAUSE
Push the quick pause lever on the bottom of the shower head away from you in any spray setting to reduce the water flow. Simply pull the lever back towards you to return to the original setting.
Note: This pause lever will not shut off water flow completely. A small amount of continuous water flow is necessary to meet plumbing code requirements.
Save Money AND Care for Mother EarthOur Quick Pause shower allows you to quickly reduce your flow to a trickle, so you conserve water while you lather, shampoo, or shave. Do this just twice per shower and you can save over $100 per year* in energy and water bills. The more times you use the pause, the more energy and water you’ll save!
* Savings compared to 2018 ASME A112.18.1 water savings standard requiring maximum flow rate of 2.5 GPM. Due to local regulations, product flowing 2.5 GPM may not be available in all U.S. locations. Savings based on 10 minute showers, two showers per day. Water saving trickle usage estimated at 2 minutes per 10 minute shower. Water, gas and sewer costs based on poll of major U.S. markets and data from U.S. Energy Information Administration. Water costs: $4.36/1,000 gal.; Sewer costs: $5.94/1,000 gal.; Gas costs: $11.17/1,000 cf. Individual savings will vary based on local utility rates.
TROUBLESHOOTING GUIDE
WARNING:
- To avoid hot water dangers and conserve even more energy, make sure your water heater is set at 120°F (48.9°C) or below.
- Test the tub/shower water with your hand before bathing.
- For additional safety for Eco flow® or high efficiency shower heads, it is recommended that all homes have installed a pressure balance tub and shower valve with the rotational limit stops properly set by a plumber.
- For external use only. The potentially deadly amoeba, Naegleria fowler, may be present in some tap water or unchlorinated well water.
CARE AND CLEANING
- To maintain proper working conditions cleaning is required when mineral deposits appear on the spray orifices. To clean mineral deposits, gently rub the rubber nozzles on the face of the shower head to dislodge.
- To clean heavier deposits, remove shower head and soak face down in 1 2 cups of white vinegar (use white vinegar only) for about 2 3 hours. Replace shower head and run in each mode to flush out vinegar. Repeat as necessary.
- Do not clean or rinse any part with harsh chemicals, heavy duty cleaners, or abrasives; this may damage parts or finish and will void warranty.
- Clean filter screen by removing from the pivot ball and rinse by back flushing to remove particles. Follow step 1 under installation to reinstall shower head, making sure washer is re seated on top of filter screen.
LIMITED LIFETIME WARRANTY
Save your receipt as proof of purchase is required for warranty action. Water Pik, Inc. warrants to the original purchaser of this product that it is free from defects in material and workmanship for as long as the original purchaser owns this product. Water Pik, Inc. will replace the product which in our opinion is defective, provided that the product has not been abused, misused, altered or damaged after purchase. (This includes damage due to use of tools or harsh chemicals.) In the event an item has been discontinued we will replace with what we deem to be the closest product. Water Pik, Inc. is not responsible for labor charges, installation, or other consequential cost. The responsibility of Water Pik, Inc. shall not exceed the original purchase price of the product. This warranty gives you specific legal rights. You may also have other rights that vary where you reside.
If product malfunctions or becomes damaged, stop use and contact Water Pik, Inc. for assistance.Have any questions or need assistance?
For quick service prior to calling have your model number and receipt ready.
In the U.S., call our toll free Customer Assistance Line 1-800-525-2774.In Canada, call our toll free Customer Assistance Line 1-888-226-3042.
Outside the U.S., write us at Water Pik, Inc. 1730 East Prospect Road Fort Collins, CO 80553-0001 U.S.A
BINDING ARBITRATION AND WAIVER OF RIGHT TO ASSERT MATTERS IN COURT AND RIGHT TO JURY TRIALBy purchasing, installing, or using this product you agree that any controversy or claim arising out of or relating to your purchase, use, modification, installation, or removal of this product shall be settled by binding arbitration. The arbitrator’s decision will be final and binding. Judgment on the award rendered by the arbitrator may be entered in any court having jurisdiction over the matter. Further, you agree that you will not have the right to litigate any claim arising out of or in relation to your purchase, use, modification, installation, or removal of this product in any court or to have a jury trial on that claim.
Arbitration of any matters shall be administered by the American Arbitration Association and conducted by one arbitrator in accordance with the consumer arbitration rules of the American Arbitration Association in effect at the time of filing of the demand. The venue for all such arbitrations shall be Colorado and any such arbitration shall be subject to the Federal Arbitration Act and Colorado law.
WAIVER OF RIGHT TO PARTICIPATE IN CLASS ACTIONS OR PURSUE CLAIMS IN A REPRESENTATIVE CAPACITY.Further, by purchasing, installing, or using this product you agree that arbitration must be on an individual basis. This means neither you, nor we, may join or consolidate claims in arbitration by or against other purchasers or users of Waterpik® products or the general public. Additionally, you may not litigate in court or arbitrate any claims as a representative or member of a class or in a purported representative capacity on behalf of the general public, other purchasers or users of this product, other persons or entities similarly situated, or in a private attorney general capacity.
Waterpik® is a trademark of Water Pik, Inc. registered in Argentina, Australia, Austria, Benelux, Canada, Chile, China, Czech Republic, EU, Finland, France, Germany, Hong Kong, Hungary, India, Israel, Italy, Japan, Kazakhstan, Korea, Mexico, Norway, Peru, Poland, Russian Federation, South Africa, Spain, Sweden, Switzerland, Taiwan, Turkey, Ukraine, United States and Vietnam.Waterpik® (stylized) is a trademark of Water Pik, Inc. registered in Australia, Canada, China, EU, Hong Kong, India, Israel, Japan, Korea, Mexico, Paraguay, Peru, Russian Federation, Switzerland, Taiwan, United States, and Vietnam.Eco flow® is a trademark of Water Pik, Inc. registered in Australia, Canada, China, Colombia, EU, Hong Kong, Mexico, and the United States.Opti Flow® is a trademark of Water Pik, Inc. registered in Australia, Canada, China, EU, Hong Kong, India, Japan, Korea, Mexico, Taiwan, and the United States.A Powerful and Invigorating Experience® is a trademark of Water Pik, Inc. registered in Canada, Mexico and the United States.Power Pulse Massage® is a trademark of Water Pik, Inc. registered in Canada, EU, Iceland, Mexico, and the United Kingdom.Power Pulse® (stylized) is a trademark of Water Pik, Inc. registered in Canada, China, EU, Iceland, Taiwan, United Kingdom, and the United States.Power Spray™ is a trademark of Water Pik, Inc.© 2019 Water Pik, Inc. Printed in China.
report this adWater Pik, Inc. a subsidiary of Church & Dwight Co., Inc. 1730 East Prospect Road Fort Collins, CO 80553 0001 U.S.A. www.waterpik.com
References
[xyz-ips snippet=”download-snippet”]