WAVLINK® High Power WiFi Outdoor AP Repeater Quick Installation Guide
Model: WL-WN570HA1 AC600Model: WL-WN570HN2 N300REV.E3
Hardware Overview
Primary Extender
Default Parameters
Web: http://wifi.wavlink.comDefault IP: 192.168.10.1Login Password: admin
WL-WN570HA1
2.4GSSID: WAVLINK-N5G/AC SSID: WAVLINK-ACWireless Key: no
WL-WN570HN2
2.4GSSID: WAVLINK-NWireless Key: no
LED indicators
Wi-Fi Signal
Assembly
Option One: LAN to Wi-Fi Extension Quick Setup
Recommend for big yard
Installation
A1. Fasten the main body holder
A2. Plug in the DeviceA3. Connect one end of an Ethernet cable to “
POE” port of POE converter.A4. Connect one end of an Ethernet cable to “LAN DATA IN” port of POE converter, and connect the other end to a “LAN” port of your Router.A5. Plug in the power connector to the “DC24V” port of POE converter, then plug the power adapter into a electrical outlet.A6. Push the “ON/OFF” button on the POE converter to power on.
A7. Connect to the Device
For Windows User
- Unplug the Ethernet cable from your computer (if any).
- Click the Wireless Network Connection icon on your taskbar.
- Click the refresh icon and connect to the Device’s network: WAVLINK-N or WAVLINK-AC.
For Mac OS X User
- Unplug the Ethernet cable from your computer (if any).
- Click the Wi-Fi icon in the top right comer of the screen, and connect to the Device’s network: WAVLINK-N or WAVLINK-AC.
Configuration
A8. Launch a web browser and type http://wifi.wavlink.com in the address field. Enter admin (all lowercase) to login.
If the login window does not pop up, please refer to the FAQ>Q1.
A9. Click “Wizard”.A10. Click “AP (LAN Bridge)“.
For Signal Band (2.4G) User
A11. Choose a Security Type.A12. Enter your password for your extended network.
For Dual Band (2.4G+5G) User
A11. Choose a Security Type.A12. Enter your password for your extended network.
Note:Some router might not compatible with WL-WN570HA1. If it doesn’t work, please:a. Click the icon at Static IP column to ON.b. Enter the info correspondingly.c. Try again.
Change Login Password
NOTE: The default login password of the Device is “admin”, We strongly recommend you change the default login password.
- Launch a web browser and type http://wifi.wavlink.com in the address field. Enter admin (all lowercase) to login.If the login window does not pop up, please refer to the FAQ>Q1.
- Click “Setup-> Login Password”.
- Enter the old password, then enter the new password and click “Apply”.
Option Two: Wi-Fi to Wi-Fi Extension Quick Setup
Recommend for midsize yard
Configuration
B1. Installation
Please refer to OPTION ONE. A1,A2,A3,A5, A6
B2. Connect to the Device
Please refer to OPTION ONE A7.
B3. Click “Wizard”.B4. Click “Repeater”.
For Signal Band (2.4G) User
B5. Select your router’s Wi-Fi SSID(s) and enter the password(s). Either keep the same SSID(s) as your host Wi-Fi or create new name(s) for the extended network(s).
For Dual Band (2.4G+5G) User
B6. Verify your wireless settings and click “Connect”. The Wi-Fi Signal LEDs should turn on and stay solid, indicating successful connections.
B7. Relocate
- Plug the Device into an electrical outlet between your router (Host Wi-Fi) and the Wi-Fi dead zone. The location you choose must be within the range of your existing host Wi-Fi.
- Wait until the Wi-Fi Signal LEDs is ON. If the signal is weak, relocate the Device closer to your router for better Wi-Fi signal.
Change Login Password
NOTE: The default login password of the Device is “admin”, We strongly recommend you change the default login password.
- Launch a web browser and type http://wifi.wavlink.com in the address field. Enter admin (all lowercase) to login.If the login window does not pop up, please refer to the FAQ>Q1.
- Click “Setup-> Login Password”.
- Enter the old password, then enter the new password and click “Apply”.
The Best Location
Wi-Fi to Wi-Fi Extension
Please install the device as followings:
Firmware Upgrade
Firmware upgrade can fix bugs of the Device. However, We DO NOT recommend you upgrade the firmware of the Device if it works normally.
- Download the latest firmware file for the Device from our Website www.wavlink.com.
- Click “Setup->Upgrade Firmware”.
- Click “Browse” to locate the download new firmware file.
- Click “Apply” button, and wait a few minutes to the firmware upgrade to be complete.
Warranty voids if you interrupted the upgrade procedure.
NOTE: Never interrupt the upgrade procedure by closing the web browser or physically disconnect your computer from the Device. If the procedure is interrupt, the firmware upgrade will fail, and you may have to return the Device to the dealer to ask for help.
FAQ (Frequently Asked Questions)
Q1. Why doesn’t the login page appear after entering http://wifi.wavlink.com ?
- If your computer is wirelessly connected, please verify that you have connected to the device’s SSID. If your computer is connected via an Ethernet cable, please verify that the connection is stable.
- Make sure your computer is set to obtain an IP address automatically.
- Use the IP address to log in to the page. The default IP is 192.168.10.1. If the Device is connected to the host Wi-Fi, please go to the router’s DHCP client list to obtain the Device’s current IP address.
- Please reset the device and try again. If the problem still exists
Q2. How do I restore the device to its factory default settings?
- While the Device is powered on, press and hold the Reset button until all the LEDs turn on momentarily.
Q3. What should I do if the LED does not change to solid after completing ?
- You may have entered the incorrect Wi-Fi password of your host Wi-Fi during the configuration, please log into the Device’s web-based interface to check the password and try again.
- Reset the device and go through the configuration again.
Q4. I have enabled a wireless MAC filter, wireless access control, or access control list (ACL) on my Router. What should I do before configuring and using the Device ?
- If you have enabled those functions of your Router, you may need to disable them first. And then follow Method ONE or Method TWO to complete the configuration.
For more details, please refer to www.wavlink.com.
GNU General Public License Notice
This product includes software codes developed by third parties. These software codes are subject to either the GNU General Public License (GPL), Version 2, June 1991 or the GNU Lesser General Public License (LGPL), Version 2.1, February 1999.
You can copy, distribute, and/or modify in accordance with the terms and conditions of GPL or LGPL.
The source code should be complete, if you want us to provide any additional source code files under GNU General Public License (GPL), please contact us in these matters. We are committed to meeting the requirements of the GNU General Public License (GPL). You are welcome to contact us local office to get the corresponding software and licenses. Please inform us your contact details (full address)and the product code. We will send you a software package with the software and license for free.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Please refer to the GNU General Public License Web site for further information.
http://www.gnu.org/licenses/old-licenses/lgpl-2.0.htmlhttp://www.gnu.org/licenses/gpl.html
WEEE Directive & Product Disposal
At the end of its serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment, or returned to the supplier for disposal.
[xyz-ips snippet=”download-snippet”]