Walker Edison B48AIEB Bench Assembly Instructions Manual

Item # : B48AIEBAssembly Instructions

Walker Edison

Please visit our website for the most current instructions, assembly tips, report damage, or request parts. www.walkeredison.com

Revised 16/07/2019(L)

Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved.      P.1

General Assembly Guidelines

I.     Ensure that all parts and hardware are available before beginning assembly.II.    Follow each step carefully to ensure the proper assembly of this product.III.  Two people are recommended for ease in the assembly of this product.IV.   The main type of hardware used to assemble this product are: bolts and screws.V.     Power tools should not be used to assemble this product.

VI.    Drill may be needed for securing product to wall.

Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved.     P.2

Parts List

 

Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved.    P.3

 

Hardware List

       Ø1/4x12mm       Bolt             12 pcsB         Ø1/4x30mm       Bolt             2 pcsC        M4                      Hex Key     1 pc

The hardware quantities listed above are required for proper assembly.

Some extra hardware may also have been included.

Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved.    P.4

Step 1

Using bolts (A,B) secure part (2) into part (1) with hex key (c) as per diagram.

Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved.     P.5

Step 2

Using bolt (A) secure part (4) into part (3) with hex key (C)as per diagram.Note: Do not fully tighten all the bolts until you finish assembling all parts .Once assembled ,go back to fully tighten all bolts .This will make the assembly easier.

Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved.     P.6

Step 3

Using bolt (A) secure part (4) into part (2) with hex key (c) as per diagram. Then fully tighten all the bolts.

Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved. P.7

Step 4

Position the assembled unit at the desired location If necessary, adjust the floor levelers at the bottom of the legs (4) to the level the unit.

Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved.   P.8

Step 5

Final Assembly

Copyright © 2019, by Walker Edison Furniture Co., LLC. All rights reserved.     P.9

 

Walker Edison B48AIEB Bench Assembly Instructions Manual – Walker Edison B48AIEB Bench Assembly Instructions Manual –

[xyz-ips snippet=”download-snippet”]


Posted

in

by