Weego CRANKENSTEIN Jump Starting 12V/24V Power Pack C154
Getting Started
REGISTER YOUR WEEGOBe sure to register your Crankenstein using the serial number located at the bottom of the unit and on the charging screen (the screen that appears when you’re charging your unit). This will allow us to best serve you if any issues arise. Register on line at myweegopro.com/product-registration. We will not provide warranty service without registration.CHARGE IT UPFully charge your Crankensteln before first use. You can use the charging kit provided to plug into the unit’s USB-C port C) for an ultra-fast charge. It takes about 6 hours to charge the unit from 0-100%. Note: When jumping, it’s always best to use a fully-charged unit
AUTOMATIC POWERING ON/OFFCrankenstein will automatically awaken when:.
- Connecting to a vehicle battery
- Pressing flashlight button
- Plugging into either USB port
- Plugging into the USB-C port
When the unit detects a period of inactivity, it will automatically turn itself off to preserve power.
OLED SCREEN BASICS
- Message display area: Messages will appear here to help guide you through the jump start process. A guide to Crankenstein’s OLED messages can be found in the online Owner’s Manual at myweegopro.com/support
- Battery charge level
- Jump Start Mode – 12V or 24V
- VB (Vehicle Battery Voltage) – when connected to a vehicle battery, Crankenstein will measure and display its voltage
Specifications
JUMP STARTING 12V/24VGas and diesel engines
- 12Y Peak/Cranking Amps: 5,000/1,200
- 24V Peak/Cranking Amps: 5,000/600
WEIGHT & DIMENSIONS• Weight: Only 9 lbs!• Dimensions: 11.5″ x 6° x 8″
BATTERY
• Type: Ultra-stable, high performance Lithium-iron phosphate (LiFeP04)• capacity: 154 Wh• Self-dlscha119: 6% charge/month – over 1 year of standby power on a single charge• Charge Cycles: 2,000• Recharge Time: 6 Hours• Operating Temperature Range: -28 ° F* to 140 ° F (*with Hotfoot™ feature)
CHARGING & POWERING
• USB-A (2): Detect-o-Matic™ Fast Charge 3.6-15.0V/1.5-3.0A• USB.C (1): Detect-o-Matic™ Fast Charge 5.0-20.0V/2.3-3.0A• CLAAccessory Port: 12V/15A
LIGHTING
• LED Flashllght: 1,000 lumens• Adjustable Brightness: 10-100%• Adjustable Light: Flood to focus• Alternate Settings: Strobe, SOS• Runtime: 15-30 hours
SPECIAL FEATURES
• OLED Screen: clearly communicates steps, messages and warnings to the user through easy-to-understand display• Connection Detection: displays the quality of the connection between the clamps and the vehicle battery• Voltage Detection: reads and displays the voltage of the vehicle battery• Hotfoot Technology: when temperatures reach an extreme -28° F, Crankenstein will automatically heat up the batteries to -5 F, so that power output is not diminished by the cold
Overview
Note: throughout the guide, you will see these numbers referenced – please refer back to the callouts on page 4.
- Rashlight Button
- 12 Volt Mode Activation Button
- 24 Volt Mode Activation Button
- Rashllght Bezel – Flashlight focus can be adjusted by sliding the bezel forward (focus) or backward (flood)
- OLED Screen
- 12V CLA Port
- Flashlight Brightness Dial
- USB-APort
- USB·CPort
- USB·C Charging Kit
- Storage Bag
- 12V Mini Clamps
Jump Starting
BEFORE YOU JUMP
• Read all instructions and safety information in our online Owner’s Manual (available for download at myweegopro.com/support) prior to using this product.• Read the owner’s manual of your equipment; it may have specific instructions on how to jump start.• This product is for use on 12V or 24V lead-acid batteries ONLY.• Turn off excess electronics, as this is an unnecessary power draw on your dead battery and helps minimize chances of a surge.• Remove any accessories, tools or USB devices attached to your Crankenstein unit.
JUMPSTART STEPS (SEE IMAGES ON PAGE 7)
1. Charge Crankenstein to 100% (ideal for performance, but not required).2. Connect to vehicle battery (RED clamp to positive terminal, BIACK clamp to negative terminal).3. Select jump start mode (12V or 24V) & check OLED screen for any warning messages.4. Using our Connection Detection gauge on the OLED screen, adjust the clamps on the battery terminals to achieve maximum connectivity.5. Jump vehicle.6. Remove unit from vehicle.
IN CASE OF ERROR MESSAGESIf you get an error message before the jump, simply follow the steps on screen to correct the error. To further understand the OLED messages displa)’ed, see the OLED index in the online Owner’s Manual.TIMERS:During the jump start process, you will see timers on the OLED screen. This is to let you know how much time you have to perform the action on-screen before the unit automatically shuts off to preserve power.
WARNING: Do not bypass 24V mode protection if you are connected to a 12V battery. The bypass allows you to jump batteries below 15.0V in 24V mode.
Lighting
Crankenstein comes equipped with an adjustable 1,000-lumen flashlight.
• Press and release the flashlight button 1 to turn on your light• Continue pressing the flashlight button to work through the following sequences: Flashlight, Strobe, SOS, off.• To turn it off at any time, simply press and hold the flashlight button.• To adjust the brightness of the flashlight, use the brightness dial 7.• To adjust the Light disperse move the bezel forward for focused light and backward for flooded light 4.
Crankenstein will give you up to 15 hours of flashlight time and up to 30 hours of strobe & SOS light on a full charge.
12V CLA Power
The 12V CLA port 6 allows you to charge and power a wide range of accessories, including but not limited to air compressors, inverters, and more. The port is compatible with devices that require 15A of power or less.
USB Charging
report this adRecharge phones, tablets, and even certain laptops using the USB ports provided. The USB-A ports 8 can be used to charge any USB device and are equipped with Detect-o-Matic111 fast-charge technology.The USB-C port 9 is an input output port; that means it can be used to recharge Crankenstein OR it can be used to charge another USB-C enabled device.
[xyz-ips snippet=”download-snippet”]