32” OScillating Tower FanVentilateur vertical oscillant 32’’Instruction Manual / Manuel d’instructionsWSFTDXS32BKWSFTDXS32BK_32 Oscillating Tower Fan_2L.indd 1 9/12/2019 17:35:53WSFTDXS32BK_32 Oscillating Tower Fan_2L.indd 2 9/12/2019 17:35:53
SAFETY INFORMATION
DANGER DANGER – Immediate hazardswhich WILL result in severepersonal injury or deathWARNING WARNING – Hazards or unsafepractices which COULD result insevere personal injury or deathWARNINGWhen using electrical appliances, basic safety precautionsshould always be followed, including the followingCAUTION CAUTION – Hazards or unsafepractices which COULD result inminor personal injury
IMPORTANT SAFEGUARDS
- Read this manual thoroughly before first use. It containsimportant information for your safety as well as for the useand maintenance of the equipment. Keep these instructions forfuture reference. Pass them on to possible new owners of theappliance.
- Use the appliance only for its intended purpose. Improper usemay lead to hazards.
- This appliance is intended for normal household use only. It isnot intended for outdoor use.
- Do not use the appliance for any purpose other than describedin this manual.
- The appliance is NOT recommended to use with electricalextension cords, this will greatly increase risks of fire and orelectrical shock.
- Keep the appliance and its power cord out of the reach ofchildren when it is in operation.
- Children should be supervised to ensure that they do not playwith the appliance.
- Never operate the appliance unattended.
- Never insert your fingers, pencils or any other objects throughthe fan covers when the fan is running. Never drop or insertobjects into any of the fan’s openings.
- Do not under any circumstances attempt to repair theappliance yourself. For serving and repairs, contact our aftersales service team to arrange a repair or replacement.
- The use of accessory attachments is not recommended by theappliance manufacture as it may cause injuries.
- Before first use, make sure the power voltage matches theinformation on the rating label of appliance.
- If the power cord is damaged, it must be replaced by themanufacturer, an authorized service agent or a similarlyqualified person.
- Do not let the power cord hang over the edge of table countersor allow it to touch hot surfaces.
- The power plug is used as the disconnect device. Please besure that the power plug is in operable condition.
- Removing the power plug is the only way to separate theappliance completely from power supply.
- Disconnect from power supply by pulling the power pluginstead of the power cord.
- Always attach the power cord to the appliance first, then plugthe power cord into the wall outlet. To disconnect, power offyour appliance first then remove the power cord from the walloutlet.
- Disconnect the power plug before moving it from one locationto another, or when the appliance is not in use, in case ofmalfunctions and prior to each cleaning.
- Place the appliance on a flat, dry and stable surface.
- Always make sure the plug is inserted into the wall outletproperly.
- Make sure you use the appliance when it stands vertically fromits base.
- Do not operate this appliance near flammable materials (e.g.curtains, textiles, walls) and never cover it. Ensure that there isalways a sufficient safe distance from flammable materials.
- Warning: Do not use this appliance near water or heavymoisture; e.g. in a damp basement or beside a swimming poolor bathtub.
- In order to reduce the risk of fire and electric shock, do notexpose the appliance to fire (fireplace, grill, candles, cigarettesand so on) or water (water drops, water splashes, vases, tubs,ponds and so on).
- Clean the appliance on a regular basis to maintain it in a goodcondition.
- No liability shall be incurred by non-compliance with theseinstructions or any other improper use or mishandling.WSFTDXS32BK_32 Oscillating Tower Fan_2L.indd 5 9/12/2019 17:35:54
RETAIN THESE INSTRUCTIONSFOR HOUSEHOLD USE ONLY
SAFETY INFORMATION
POLARIZED PLUG
This appliance has a polarized plug (one bladeis wider than the other). To reduce the risk ofelectric shock, this plug is intended to fit in apolarized outlet only one way. If the plug doesnot fit fully in the outlet, reverse the plug, if itstill does not fit, contact a qualified electrician.Do not modify the plug in any way.
DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THISSAFETY FEATURE IN ANY WAY.
RETAIN THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY
SAFETY INFORMATION
BATTERY
WARNING – CHEMICAL BURN AND CHOKING HAZARD. KEEPBATTERIES AWAY FROM CHILDREN.This product contains a lithium button/ coin cell battery in theremote control unit. If a new or used lithium button/ coin batteryis swallowed or enters the body, it can cause severe internal burnsand can lead to death in as little as 2 hours. Always completelysecure the battery compartment. If the battery compartment doesnot close securely, stop using the remote control unit. Remove thebatteries, and keep it away from children. If you think batteriesmight have been swallowed or placed inside any part of the body,seek immediate medical attention.
CAUTION
- Do not install backwards or short circuit the batteries.
- Do not attempt to dismantle or charge the batteries. Keepaway from fire.
- Follow battery manufacturers instructions when installing newbatteries.
- The cells shall be disposed of properly, including keeping themaway from children; even used cells may cause injury.WSFTDXS32BK_32 Oscillating Tower Fan_2L.indd 7 9/12/2019 17:35:54
HOW TO USEASSEMBLING THE TOWER FAN
- Loosen the base holder (F) and take it off from the bottom ofthe fan housing (D).
- Place the power cord through the centre of two base panels(A) and (B).
- Snap the two base panels (A) and (B) together by fixing onebase panel into the slots of another base panel.
- Attached the the base to the fan housing, put the base holder(F) back and tighten it.
PARTS DESCRIPTIONS
- Control panel
- Front cover
- Base
- Back cover
- Power wire
OPERATION INSTRUCTIONS
After connecting the tower fan to the power supply, you canoperate it with the control panel (1) or remote control buttons.Note: Make sure the tower fan is turned on before you can use allfunctions.
HOW TO USE
Button |
Functions |
Press to turn the tower fan on or off. |
|
Press to adjust the fan speed (low, mid, high). |
|
Press to change the fan to different working modes (normal, natural, sleep). |
|
Each press will increase the working time timer of the tower fan for half an hour (from 0.5 hours to 7.5 hours). |
|
Press to start or stop oscillating. |
Status of the light indicators
The light indicators will show you the current status of wind speed,working mode and timer.
Replace the remote control battery
When the remote control buttons do not respond properly, thebattery may have run out. Replace with a new 3V Lithium battery(Model: CR2025).
CLEANING AND MAINTENANCE
- Prior to cleaning, switch off the power supply and pull out theplug from the grid power socket.
- A soft dry cloth is usually adequate but may be moistened withmild detergent solution if required.
- Never clean the unit with solutions such as thinners andpolishing powder, etc.
DISPOSAL
Proper disposal of this product.This symbol indicates that this appliance may not be treatedas household waste. Instead, it should be taken to theappropriate collection point for recycling electrical andelectronic equipment.Please use the return or collections services available in yourcommunity or contact the retailer where you purchased thisproduct.
INFORMATION AND SERVICE
If you have questions or concerns about your product, please visitour website: www.westinghousehomeware.com, or contact ouroverseas offices/agents.In line with our policy of continuous product development,we reserve the right to change the product, packaging anddocumentation specifications without prior notice.
References
[xyz-ips snippet=”download-snippet”]