Westinghouse WSHPTC123 9″ Portable LED Heater + Candle Lantern Instruction Manual

Table of Contents

Westinghouse WSHPTC123 9" Portable LED Heater

+ Candle Lantern Instruction Manual

SAFETY INFORMATION

WARNING

When using electrical appliances, basic safety precautions should always be followed, including the following

IMPORTANT SAFEGUARDS

Read this instruction manual carefully before using the appliance and keep it for future reference.

A Use the appliance only for its intended purpose. Improper use may result in an electric shock, fire or serious injury and may void the warranty.
This appliance is for household use only. It is not suitable for commercial, industrial, or outdoor use.
This appliance is intended to be used in households and similar applications such as:– staff kitchen areas in shops, offices and other working environments;– farm houses;– by customers in hotels, motels, and other residential type environments;– bed and breakfast type environments.
Do not use the appliance if it is damaged or not working properly.
This appliance can be used by children aged 8 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Cleaning, maintenance or connecting the appliance to the power supply must not be done by children unless they are older than 8 years of age and supervised by an adult.
Children under the age of 3 must be constantly supervised if they are in the same vicinity as the appliance while it is in use or cooling down after use.
Keep the appliance and its power cord out of the reach of children when it is in operation.
A Children should be supervised to ensure that they do not play with the appliance.
A Never leave the appliance unattended while it is in operation.
Never connect this appliance to an external timer or remote control system.
Do not connect the appliance to a circuit that is regularly turned on and off by your electricity provider.
Never cover the heater or the air outlets/inlets or vents as this could cause a fire.
All covers are intended to prevent direct access to the heating elements and must be in place when using the appliance.
CAUTION: Parts of this appliance may become very hot and cause burns. Make sure that children or persons of reduced physical, sensory, or mental abilities are supervised and protected from accidental burns. In order to avoid any injury or burn, do not touch the heater directly. Use gloves or other means.
Position the appliance upright on a firm, level, heat-resistant surface near a power socket and out of reach of children.
Do not touch the hot surfaces. Only use the handles, knobs, or buttons.
Always unplug the appliance when unattended and after use. Let it cool down before cleaning and storing.
When using the appliance, allow adequate air space above and on all sides for air circulation.
Place the appliance at least 3 feet away from any combustible items, such as furniture, curtains, bedding, clothes, and papers.
Do not place this product on a carpet.
Do not place the appliance on or near open flames, an electric or gas burner, or a heated oven.
Do not use the appliance in places such as garages or warehouses where dangerous flammable products are stored such as paints, thinners, alcohol etc.).
The appliance must not be placed below an electrical socket.
Do not use the heater in a bathroom, laundry, humid environment, or near to a body of water such as a swimming pool. Maintain a distance of at least 5 feet away from water. Do not immerse the appliance in water or any other liquid or place it under running water (see CLEANING AND CARE).
Keep the heater clean. Do not allow objects to enter the air vents as this may cause an electric shock, fire, or damage.
The use of accessories or fittings other than the original parts supplied with this appliance may result in an injury, fire or damages and will void the warranty.
Do not under any circumstances attempt to open, dismantle, or repair the appliance. For servicing and repairs, contact the retail outlet, the manufacturer, or an authorized service center.
Make sure no small piece of packaging, such as polystyrene, has been left on or fallen into the air inlets or outlets.
RISK OF SUFFOCATION! KEEP OUT OF REACH CHILDREN – Keep all packaging materials out of the reach of babies and children.

POWER SUPPLY

Before first use, make sure the power voltage matches the information on the appliance rating label.
Only connect the appliance to an earthed wall socket.
To avoid a fire or electric shock, plug the unit directly into a 120V AC electrical outlet.
A short power cord (or detachable power cord) should be used to reduce the risk of becoming entangled in or tripping over the cord.
Always plug the appliance directly into the wall socket. Do not use multi-plugs, adapters, or extension cords.
Always fully unwind the power cord before using the appliance.
Do not twist the power cord.
Check there are no heavy items on the power cord, including carpets.
Make sure there is no pressure on the cord where it connects to the heater.
Never carry the heater by the power cord.
The cord should be arranged so that it does not touch hot surfaces, is not draped over a countertop or tabletop where it may be pulled on by children or tripped over unintentionally.
Never use the appliance with a damaged power cord or plug, or if the appliance has malfunctioned in any way. If the power cord, plug, or appliance is damaged, the appliance must be returned or replaced by the manufacturer, an authorized service agent or a similarly qualified person.
Removing the power plug is the only way to separate the appliance completely from the power supply. Make sure the power plug is accessible.
When disconnecting the appliance from the power supply, pull the power plug instead of the power cord.
Keep the power cord away from hot surfaces. Do not plug in the power cord or operate the appliance with wet hands or when standing in water.
If the appliance falls into water, quickly turn it off at the wall socket and unplug it immediately. Make sure you are not standing on wet ground or have wet hands when touching the wall socket or plug.
Keep the appliance and power cord away from hotplates, hobs, and burners.
It is normal for the plug to get warm while the appliance is being used. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet in one orientation. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, overheating and/or melting of the plug could occur. If the connection is loose, contact a qualified electrician. Do not attempt to modify the plug in any way.

RETAIN THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY

HOW TO USE

DESCRIPTION OF PARTS

Control panel
Candle with flame effect
Air inlet (on the back)
Air outlet
ON/OFF switch
Tip-over sensor (on the bottom)– I Heater low – 450W– II Heater high – 900W
LED screen
FLAME EFFECT ON/OFF button
TIMER button (1-12 hours)
THERMOSTAT button (59°F to 90°F)
POWER button

NOTE: All images shown are for illustrative purposes only and may not be an exact representation of the product model.

BEFORE FIRST USE

Remove all packaging from the appliance.
Unpack all parts and check for damage that may have occurred during transport. If any parts are damaged or missing, do not use the appliance and return it to your retail outlet immediately.

OPERATING INSTRUCTIONS

NOTE:

It is normal when heaters are turned on for the first time, or if they have not been used for some time, to emit some smell and fumes. This will disappear after a short time (approx. 2 hours).
It is also normal for the heater to emit small crackling sounds when you first turn it on.
This heater is designed for occasional or intermittent use and should not be left on for prolonged periods of time.

CAUTION:

The heater must always be placed in an upright position on a horizontal surface. Never turn the heater upside down when in use as it could cause irreparable damage.
The heater does not have a device to control the room temperature. Do not use the heater in small rooms occupied by persons incapable of leaving the room on their own, unless constant supervision is provided.

SETTING UP THE HEATER

Make sure the heater is placed upright on a firm, level, heat resistant and non-combustible floor surface. Do not place the heater on a carpet or soft surface that may block the air inlets/ outlets and/or increase the chance of the heater tipping over.
Place the appliance at least 3 feet away from any combustible items, such as furniture, curtains, bedding, clothes, and papers.
Do not place the heater next to a shower, bath, swimming pool or other body of water. Maintain a distance of at least 5 feet to water. Do not use the heater in wet or humid conditions.
Before plugging in the heater, check the ON/OFF switch (5) is in the off-position 0.
Check the heater’s rating plate matches the mains socket voltage. Connect the heater to the mains power supply.

USING THE HEATER

Press the ON/OFF switch (5) to the on-position I. Two red lines will appear on the LED screen.
Press the FLAME EFFECT ON/OFF button (8) to turn the flame effect on or off.NOTE: The flame effect is independent of the heating function. You can turn the flame effect on without turning on the heater.
Press the POWER button (11) to turn the heater on and select the heating level:
Press the THERMOSTAT button (10) repeatedly to select the desired room temperature between 59°F and 90°F. The default setting is 68°F. The heater will stay on until the room has reached your set temperature. Then the heater will turn on and off to maintain the room at that level.NOTE: The heater must be set to a temperature level that is at least a few degrees higher than the room temperature for the heating function to be activated. If the heater does not appear to be working, increase the temperature until the heating function turns on.
Press the TIMER button (9) to set the heater to remain on for 1 to 12 hours. If you select 00 the timer function is off.NOTE: The time and the temperature will flash on the screen when you are in settings mode. When the setting is complete, the heater will show the set temperature (steady).
To turn the heater off, press the POWER button (11) until appears on the screen. Then press the ON/OFF switch (5) to the off-position 0. Unplug the power cord from the wall socket.

NOTE:

Do not cover the heater or the air inlets/outlets/vents at any time while it is turned on. There is a risk of fire if the heater is covered.
For safety reasons, this heater is equipped with a tip-over sensor. This sensor automatically shuts down the heating element if the heater is not in an upright position while in operation. To resume normal operation, check the heater is cool enough to handle. Turn it upright again and it will continue to work.
The heater has a built-in overheating protection mechanism. The safety mechanism will turn off the power if the heater overheats. Turn the ON/OFF switch (5) off and pull the plug from the wall socket. Wait 10 minutes for the heater to cool down. Remove the cause of overheating, such as excessive dust, and turn on the heater. If for any reason the heater does not turn on, take it to your local service center for repair.

CLEANING AND CARE

CAUTION: Always unplug the appliance from the mains power supply and let it cool down before cleaning.
We recommend that you clean the heater regularly.
Wipe the outside of the appliance with a soft, damp cloth and dry thoroughly. Do not let any liquid enter the heater.
Periodically check the power cord and plug for signs of damage or overheating and if necessary take the heater to an authorized agent for repair.

NOTE:

Do not use solvents, chemical or abrasive cleaning agents, wire brushes, sharp objects or scouring pads to clean the product.
Never immerse the appliance in water.
Always clean the appliance before storing it for a long time.
If you are not using the appliance for a long period, store the appliance in its original packaging or in a dust-free, dry environment.

TROUBLESHOOTING

DISPOSAL

Proper disposal of this product.

This symbol indicates that this appliance may not be treated as household waste. Instead, it should be taken to the – appropriate collection point for recycling electrical and electronic equipment. Please use the return or collections services available in your community or contact the retailer where you purchased this product.

INFORMATION AND SERVICE

If you have questions or concerns about your product, please visitour website: www.westinghousehomeware.com, or contact our overseas offices/agents.In line with our policy of continuous product development, we reserve the right to change the product, packaging and documentation specifications without prior notice.

Model: WSHPTC123Voltage: 120V, 60HzPower: 900WSize in inches (W x D x H): 6.46 x 6.38 x 11.97