Whirlpool Dryer User Manual

Whirlpool Dryer User Manual

OPERATING INSTRUCTIONS

IMPORTANT

Fire Hazard No washer can completely remove oil. Do not dry anything that has ever had any type of oil on it (including cooking oils). Items containing foam, rubber, or plastic must be dried on a clothesline or by using an Air Cycle. Failure to follow these instructions can result in death or fire.

WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS, located in your appliance’s Owner’s Manual, before operating this appliance.

STEP 1. CLEAN LINT SCREEN

STEP 2. LOAD CLOTHES

STEP 3. PRESS POWER BUTTON

STEP 4. SELECT THE DESIRED CYCLE FOR YOUR LOAD*

STEP 5. ADJUST CYCLE SETTINGS AND OPTIONS, IF DESIRED

STEP 6. PRESS, HOLD, AND RELEASE START BUTTON

NOTE: Start button must be held for 1 second to start cycle. Once the status lights are illuminated, release the start button.

CONTROL PANEL AND FEATURES

*Not all features, cycles, and options are available on all models. Appearance may vary.

  1. POWERPress to turn on/off or to stop/cancel a cycle.
  2. CYCLE KNOBTurn knob to select desired cycle.NOTE: Your dryer comes with two types of cycles – Sensor drying cycles and Timed drying cycles.SENSOR DRYING CYCLES:Use Sensor Cycles for better fabric care and energy savings. The dryer senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level. Note that you cannot adjust the time with these cycles.TIMED DRYING CYCLES:In these cycles, you can specify the drying time. Time options available are 15, 30, 60 and 90 minutes. For a complete list of all cycles, please refer to the cycle guide document.
  3. START/PAUSEPress and hold the Start/Pause button for 1 second until all status lights are illuminated, then release to start cycle. Press during a cycle to pause cycle.
  4. CYCLE MODIFIERS (Not all modifiers are available on all cycles)TEMP Press to modify the cycle’s available temperature. (Extra Low, Low, Medium, and High)TIME (Air Only, Timed Dry, and Quick Dry Only) Press to modify the time for the timed cycle between 15, 30, 60, and 90 minutes.OPTIONS Press to add or remove options for each cycle. Press once to activate Wrinkle Shield, twice to activate Static Reduce and three times for both.WRINKLE SHIELD If you will be unable to remove a load immediately, activate this option to add 150 minutes of periodic tumbling to help reduce wrinkles from forming after the cycle completes.STATIC REDUCE This option can help reduce the build up of static cling formed during the drying process. When activated, this option will tumble with steam towards the end of the cycle to reduce static.MUTE CYCLE SIGNAL Use this option to turn the end of drying cycle signal on or off.

CHOOSING THE RIGHT CYCLE

A cycle guide for your dryer can be found online at www.whirlpool.com. The document will help identify which cycle to choose for various load types as well as the default cycle options. For example we recommend using the NORMAL cycle with Medium temperature for cottons, linens and mixed-garment loads.

SPECIALITY CYCLE

WRINKLE CONTROL:

This cycle is designed to help remove or reduce wrinkles, this cycle is great for permanent press clothing. The dryer cycle uses low heat and a cool down period to keep clothes from wrinkling or creasing.

STEAM REFRESH:

This cycle is best for reducing wrinkles and odors from dry items. This cycle is great to refresh a wrinkled garment or when a load was left in the dryer too long.

For detailed installation instruction and maintenance information, winter storage, and transportation tips, please see the “Owner’s Manual” included with your machine

ASSISTANCE OR SERVICE AND ADDITIONAL INFORMATION

*Not all cycles, settings or options are available with all models.

FAQS

How long does a Whirlpool dryer last?

Generally, Whirlpool dryers have a lifespan of 8-12 years. However, some may last longer if you maintain it properly. But if your Whirlpool dryer is at least ten years old, replacing it is more reasonable. Repairing the 10-year-old dryer will likely cost less.

What causes a Whirlpool dryer not to start?

A failed thermal fuse is one of the most common part failures when your Whirlpool dryer won’t start. This fuse is a protective feature that blows if the dryer is in danger of overheating.

How many years does a dryer last?

A dryer should last 10-13 years. To extend the dryer’s life, clean the lint trap after each use and make sure the outer vent is clear as well.

What is the most reliable brand of dryer?

The most-reliable brands include LG, Speed Queen, and Whirlpool (including Amana and Maytag). Brands at the bottom include GE, Electrolux, and Samsung.

How do you know if your dryer is going bad?

Your Clothes Aren’t Drying Properly. Do you feel wet or damp areas when you remove your clothes from the dryer? …Excessive Noise. Do you often hear a lot of noise, such as rattling, banging, or high-pitched squealing? …It’s Too Old. …You See Exposed Wiring.

Is it worth fixing a dryer?

Is it worth repairing a dryer? Dryer repairs are worth it if the appliance is less than 4 years old and the cost is less than $400. For older dryers and/or costly repairs, replacing your appliance is more cost effective.

Why won’t my dryer start all of a sudden?

There are many things that could be the culprit for why your dryer won’t start, including a bad thermal fuse; a failed start switch or door switch; a bad drive motor (what makes the dryer’s drum turn and the blower wheel to work); a broken drive belt; a bad timer; a bad belt switch; a blown control board; or overall .

Why did my dryer suddenly stop working?

A dryer needs to be plugged in to run. Check the outlet first and make sure that the dryer is securely plugged in. Also, if an electric dryer stopped working, it could be because of outlet damage or a tripped fuse.

What is the average price for a dryer?

According to Kitchens.com, the typical price range spans from $200 to $1,750. Plan to pay about double that if you’re also buying a new washing machine because washers cost around the same amount.

Is Maytag or GE a better dryer?

Ultimately the Maytag is probably the better built of the two units, although it’s a pretty close call. The features are similar, but GE provides an extra layer of versatility, although it’s extra bulk also makes it a harder fit in certain places.

Is 8 year old dryer worth repairing?

If your clothes dryer is seeing normal levels of use and approaching ten years old, replace the entire thing rather than replacing a burned-out motor or bad pump. After all, something else is going to fail soon.

What size dryer do I need for a family of 4?

Opt for a medium dryer for 3-4 people households and regular medium size loads of laundry. And opt for a large dryer if you’re a family of five or more, and do frequent large loads of laundry. In general, tumble dryers vary from 15 pounds to 22 pounds. 15-16 pound dryers: Small families.

Where is the fuse on my dryer?

On electric dryers, the thermal fuse is often located on the blower housing or near the heating element. On gas models, the thermal fuse can be found on the blower housing or near the burner. To reach the fuse on some dryers, you can simply uninstall the appliance’s rear panel or a lower front access panel.

Why does my Whirlpool dryer keep stopping?

The most common cause of a dryer shutting off after a few minutes is a broken or faulty drive belt. The drive belt goes around the dryer drum, idler pulley, and the motor pulley and helps the dryer to rotate when operating. If it is defective, the dryer won’t work correctly.

What is the best month to buy appliances?

The best time to buy appliances is when new models roll out: washers, dryers, and dishwashers in September and October, refrigerators in May, and ranges/ovens in January. When manufacturers unveil the latest models, retailers reduce prices on models from previous years to create more room for the new inventory.

VIDEO

References

[xyz-ips snippet=”download-snippet”]


Posted

in

by