Whirlpool WED5010LW White Moisture Sensing Electric Dryer
DETAILED PLANNING DIMENSIONS
|
Electrical Requirements |
||
|
Fuel Type |
Electric |
Gas |
| Minimum Circuit Amperage Rating |
30A |
15A |
| Maximum AMP Draw |
26A |
6A |
| Operating Voltage |
120/240 V – AC only |
120 V – AC only |
| Current Canada Rating |
24A |
|
| Operating Frequency |
60 Hz |
|
Product Dimensions |
|||
|
in |
mm |
||
| A | Height (With leveling legs not extended) |
40 1/2 |
1028 |
| B | Width |
29 |
737 |
| C | Top Height (with min. feet) |
36 7/8 |
937 |
| D | Depth |
28 8/3 |
722 |
| E | Top Height (With leveling legs fully extended) |
38 1/2 |
978 |
| F | Height (With leveling legs fully extended) |
42 1/8 |
1069 |
| G | Depth with Door Open |
4111∕16 |
1059 |
|
Product Dimensions |
|||
|
in |
mm |
||
| H | Strain Relief from Side (electric) |
15 3/4 |
400 |
| I | Strain Relief Height (electric) (With leveling legs not extended) |
28 1/8 |
714 |
| J | Exhaust Duct from Side |
14 7/16 |
366 |
| K | Power Cord from Side (gas) |
14 3/4 |
375 |
| L | Power Cord Height (gas) |
32 3/8 |
822 |
| M | Gas Connection (With leveling legs not extended) |
1 11/16 |
43 |
| N | Gas Connection from Side |
9 3/16 |
234 |
| O | Strain Relief Height (electric) (With leveling legs fully extended) |
29 3/4 |
755 |
| P | Exhaust Duct Height (With leveling legs fully extended) |
6 11/16 |
170 |
| Q | Power Cord Height (gas) |
34 |
863 |
| R | Gas Connection (With leveling legs fully extended) |
3 5/16 |
84 |
| S | Exhaust Duct Height (With leveling legs not extended) |
5 1/16 |
128 |
| Gas Power Cord Length |
60 |
1525 |
Spacing for recessed area or closet installation
The dimensions shown are for the recommended spacing allowed.
- Additional spacing should be considered for ease of installation and servicing.
- Additional clearances might be required for wall, door, and floor moldings.
- Additional spacing of 1″ (25 mm) on all sides of the dryer is recommended to reduce noise transfer.
- For closet installation, with a door, minimum ventilation openings in the top and bottom of the door are required. Louvered doors with equivalent ventilations openings are acceptable.
- Companion appliance spacing should also be considered.
[xyz-ips snippet=”download-snippet”]