Whirlpool WGD7120HC 35-Cycle Smart Capable Gas Dryer User Guide

Whirlpool WGD7120HC 35-Cycle Smart Capable Gas Dryer

WARNING:FIRE OR EXPLOSION HAZARD Failure to follow safety warnings exactly could result in serious injury, death, or property damage.

  • Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
  • WHAT TO DO IF YOU SMELL GAS:
  • Do not try to light any appliance.
  • Do not touch any electrical switch; do not use any phone in your building.
  • Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.
  • If you cannot reach your gas supplier, call the fire department.
  • Installation and service must be performed by a qualified installer, service agency, or the gas supplier.

CONTROL PANEL AND FEATURES

  1. POWERTouch to turn on/off or to stop/cancel a cycle.
  2. WHAT TO DRY/HOW TO DRYFirst select a cycle from the “What to dry” and then select the “How to dry” to get the best combination cycle available for the type of items you are going to dry. See “Cycle Guide” for cycle details.
  3. START/PAUSETouch and hold; cycle will start after countdown. Touch START/PAUSE during a cycle to pause it. Touch again to resume.
  4. MODIFIERS (Not all cycles and options are available on all models.)NOTE: Dryer remembers the last completed cycle and cycle settings. The next time you turn dryer on, it will be set to run the last cycle.Temp: Touch to modify the cycle’s available temperatures (Air Only, Low, Medium, Medium High, High). Follow garment label instructions for best results. Once a cycle has started, the temperature can be changed within the first 5-8 minutes.Dryness: Touch to modify the cycle’s available dryness levels on the sensor cycles (Less, Normal, More).NOTE: Dryness is for use with Automatic Cycles only.Wrinkle Shield™ Option: Touch to turn on/off and on with steam (select models). Wrinkle Shield™ option adds up to 150 minutes of periodic tumbling and heat to help reduce wrinkling. Wrinkle Shield™ option with steam will add a short steam cycle after 60 minutes to help smooth wrinkles.
  5. CYCLE OPTIONS (Not all cycles and options are available on all models.) Use to select available modifiers for your dryer.Remote EnableTouch each time you want to remotely control via the Whirlpool® app. Follow the instructions in the “GET THE WHIRLPOOL® APP AND GET CONNECTED” section below for more details.NOTE: Once Remote Enable has been selected, certain interactions with the dryer will cause it to cancel Remote Enable. Example: Opening the door.Damp Dry SignalTouch Damp Dry Signal or touch and hold Drum Light (depending on the model) for at least 3 seconds to turn the Damp Dry Signal on or off. You will get a sound and display notification as “Items are damp. You can pause and reposition for best results”.Drum LightTouch to turn the drum light on/off.Steam OptionsTouch to add Steam and/or Reduce Static to selected cycle. Steam option adds steam to the end of cycle to help smooth wrinkle. Reduce Static will automatically tumble, pause and introduce a small amount of moisture to the load to help reduce static.Steam Refresh (steam models only)This cycle is best for reducing wrinkles from dry items. Cycle time will increase, depending on number of items. This is an independent cycle that cannot be combined with any other cycle. More Time/Less Time Timed Dry Adjust Touch More Time or Less Time with the TIMED DRY/QUICK cycle to increase or decrease the length of the cycle time.EcoBoostTM OptionThe EcoBoostTM option will default on only for the REGULAR/NORMAL cycle and is only available on that cycle. This option allows you to increase your energy savings by using a slightly lower heat level. The EcoBoostTM option will increase drying times by approximately 40 minutes, which will be reflected on the LCD Display. If optimal time is desired, touch EcoBoostTM to turn off this option.Cycle SignalUse this option to turn the signal indicating the end of a drying cycle to Low, Medium, High, or Off.NOTE: Press/hold Cycle Signal to select the volume.More Options: Touch to select your “Favorite cycle” (Only available for models with Wi-Fi capability). Favorite cycle: You may create “custom” cycles in the app and store one frequently-used or favorite cycle on the machine.
  6. LCD DISPLAY: When you select a cycle, its default settings will display and the Estimated Time Remaining (for Automatic Cycles) will vary depending on “What to dry” and “How to dry” selections, or actual time remaining for TIMED DRY cycles (for Manual Cycles) will be displayed.CYCLE PHASE LABELSSensingDisplays during Sensor cycles to indicate that the moisture sensor on the dryer is operating. It will not be displayed during Timed/Quick Dry cycles or options such as Wrinkle Shield™ option.DryingDryer is in the main dry phase of the automatic cycle.SteamingSteam option selected and Steam phase running.Cool DownThe dryer has finished drying with heat and is now tumbling the load without heat to cool it down.Static ReduceReduce Static phase is running.EndDisplay message will show “Drying is complete” and will time-out after 5 minutes. This will indicate that the selected cycle has ended and the load may be removed from the dryer. If Wrinkle Shield™ option has been selected, the dryer may continue to tumble the load, even if “End” is displayed.Check VentThe Check Vent alert is a feature available for Automatic cycles only. This alert will show the status of airflow through the dryer and the dryer vent system for the dryer’s life. During the sensing phase at the beginning of the cycle if it detects a blocked vent or low pressure it will display “Check vent. Clean lint screen or vent for better performance.”REMEMBER: The dryer will continue to operate even when check vent notification is displayed, but poor airflow can impact dry times and overall performance. Display message can be cleared by pressing any key with the exception of Power which will cancel the cycle.

 GET THE WHIRLPOOL® APP  AND GET CONNECTED

With your mobile device download the Whirlpool® app. You can get subscription and connectivity instructions, terms of use, and privacy policy at www.whirlpool.com/connect or in Canada www.whirlpool.ca/connect.

Once installed, launch the app and you will be guided through the steps to subscribe and create your user account to connect to your appliance. If you have any problems or questions, call Whirlpool® Connected Appliances at 1-866-333-4591.(Only available for models with Wi-Fi capability). When unit is first powered on, it will prompt to select language before you see message to Download APP or press any other key to setup Wi-Fi later.

USING YOUR DRYER

WARNING: Fire HazardNo washer can completely remove oil. Do not dry anything that has ever had any type of oil on it (including cooking oils). Items containing foam, rubber, or plastic must be dried on a clothesline or by using an Air Cycle. Failure to follow these instructions can result in death or fire.

WARNING: Explosion HazardKeep flammable materials and vapors, such as gasoline, away from dryer. Do not dry anything that has ever had anything flammable on it (even after washing). Failure to follow these instructions can result in death, explosion, or fire.

If you unintentionally select wrong language during digital un-boxing and/or you want to get back to Factory settings then perform Factory reset.

FACTORY RESET

Press/hold both Temp and Wrinkle Shield™ keys until display count-down has completed. Unit will power back on with “Select Language” display message.NOTE: Government energy certifications for this model were based on the Regular + Normal Cycle, Highest temperature setting, Normal Dryness Level, EcoBoost™On. The as-shipped defaults were the same as the Government Energy Certification Settings except the default Temperature Setting of Medium was adjusted to the Highest temperature setting. Cycles that are available for post-sale download may use more energy than the Normal cycle, upon which the energy use rating of this dryer is based.NOTE: See “Cycle Guide” for more information about cycles, settings, and options. Not all cycles, settings, and options are available with all models. Read all your Manuals for more information on your unit.

CYCLE GUIDE

Your dryer has a unique user interface to help you select the best cycle you need for your load. The “What to dry” “How to dry” layout guides you to the optimal cycle in two easy steps:

  1. First determine what items are in the load that you are trying to dry. Use that to guide your “What to dry” selection.
  2. Then determine how you want the dryer to dry them by selecting the appropriate “How to dry” selection. Modifiers are preset for the items being dried, but can be changed if desired.

To get the most energy savings and enhanced fabric care from your dryer, use the Automatic cycles. These cycles measure the drying air temperature and moisture levels to turn the dryer off once the load reaches the selected dryness level. Dryer performance and results may vary with service voltage less than rated voltage (Electric, 240 V; Gas, 120 V).

 

For best fabric care, choose the cycle that best fits the load being dried.

R – Recommended Cycle

a – Alternate Cycle

Blank – Cycle is available but not optimal.

How do you want to dry?
“How to dry” Cycle Selection
NORMAL Wrinkle Control HEAVY DUTY SANITIZE* TIMED DRY QUICK
Regular

Automatic Sensor Cycle stops when dryness level is reached.

  High Heat longer cycle

Automatic Sensor Cycle stops when dryness level is reached.

Hot High Heat

Used to kill 99.9% of three common bacteria.

Set  amount of dry time

Dryer runs for the amount of time selected.

Set  amount of dry time

Dryer runs for the amount of time selected.

What do you want to dry? “What to dry” Cycle Selection            
Baby Clothes  

 

 

 

 

 

 

REGULAR

R          
Pajamas R          
Handkerchiefs a     R    
T-Shirts R          
Sweatshirts a   R      
Coats and Jackets a   R      
Cotton Drapes   R        
Machine Wash Curtains   R        
Tablecloth R a        
Business Casual   R        
No-Iron Fabrics   R        
Bras  

 

 

 

DELICATES

a R    

 

 

Not Available

   
Fabric Shower Curtain   R      
Lingerie a R      
Sheers   R      
Undergarments a R      
Wool   R      
Dress Shirts/Pants a R      
Blankets  

 

 

 

 

 

BULKY ITEMS

R   a      
Fabric Rugs R          
Heavy Drapes R   a      
Jeans a   R      
Comforters R   a      
Pet Bedding R   a      
Pillows – Fiber Fill a R        
Sheets R a        
Sleeping Bags R          
Stuffed Animals   R        

Extended high-heat drying cycle intended to help sanitize items such as sheets and towels. This cycle is not recommended for all fabrics. For best results, this cycle should be run to completion to ensure sanitization and do not interrupt cycle.

For best fabric care, choose the cycle that best fits the load being dried.

R – Recommended Cycle

a – Alternate Cycle

Blank – Cycle is available but not optimal.

How do you want to  dry?
“How to dry” Cycle Selection
NORMAL Wrinkle Control HEAVY DUTY SANITIZE* TIMED DRY QUICK
Regular

Automatic Sensor Cycle stops when dryness level is reached.

  High Heat longer cycle

Automatic Sensor Cycle stops when dryness level is reached.

Hot High Heat

Used to kill 99.9% of

three common bacteria.

Set amount of dry time

Dryer runs for the amount of time selected.

Set amount of dry time

Dryer runs for the amount of time selected.

What do you want to dry? “What to dry” Cycle Selection            
Cotton Undergarments  

WHITES

R a        
White Napkins R a        
Athletic  

COLORS

R a        
Performance Wear R a        
Colored Napkins R a        
Dish Cloths  

TOWELS

a   R a    
Towels a   R a    
Non-Rubber Lined Rugs   R        

Extended high-heat drying cycle intended to help sanitize items such as sheets and towels. This cycle is not recommended for all fabrics. For best results, this cycle should be run to completion to ensure sanitization and do not interrupt cycle.Models 7120, 8120, 8127NOTE: These clothes dryer’s Government energy certifications were based on the Regular + Normal Cycle, Maximum Drying Temperature Setting, Normal Dryness Level, EcoBoostTM On. The as – shipped defaults of EcoBoostTM On, Wrinkle ShieldTM option off, Remote Enable off, were used.Models 5100 & 6120NOTE: These clothes dryer’s Government energy certifications were based on the Regular + Timed Dry Cycle and Maximum Drying Temperature Setting. The as – shipped defaults of EcoBoostTM On, Wrinkle ShieldTM option off, Remote Enable off, Normal Dryness level, were used.

DRYER ICONS

ASSISTANCE OR SERVICE AND ADDITIONAL INFORMAANCE

For detailed installation instructions and maintenance information, winter storage and transportation, please see the INSTALLATION AND CARE INSTRUCTIONS MANUAL included with your machine.For detailed product dimensions, please see the DIMENSION GUIDE that can be found at www.whirlpool.com/owners or in Canada www.whirlpool.ca/owners.

For information on any of the following items please visit www.whirlpool.com/owners or in Canada www.whirlpool.ca/owners. This may save you the cost of a service call.

To speak with a customer service representative or if you have additional questions, call us toll free at  1-866-698-2538 or in Canada call 1-800-688-2002.You can write with any questions or concerns at:Whirlpool Brand Appliances Customer eXperience Center 533 Benson RoadBenton Harbor, MI 49022-2692Please include a daytime phone number in your correspondence.

References

[xyz-ips snippet=”download-snippet”]


Posted

in

by