WHITE RHINO Wifi Repeater User Guide

WHITE RHINO WIFI RepeaterUser Guide

Product description

The wireless WiFi amplifier is a functional device that ensures that the WiFi range is extended. It works by distributing the wireless network signals and improving regional coverage to achieve smooth operation of the wireless home network.

The main advantages of the wifi amplifier:

  • Extend the range of standard wifi signal
  • Easy to install
  • Cheap solution
  • Plug into a power outlet, no cables
  • Supports WPS

The wireless WiFi amplifier enlarges and amplifies the WiFi signal and range.

Configuration

Setting up a Wireless Infrastructure Network

Wireless Repeater Mode:You will need WiFi AP/Router Internet Access.

Wireless AP Mode:You will need broadband Router Internet access. Connect the WiFi-Repeater to your Router/Switch with RJ-45 Cable.

How to Configure the Wi-Fi Repeater

A. Configure the Wi-Fi Repeater wirelessly.

  1. Plug the Wi-Fi Repeater to a wall socket
  2. Click on the network icon ( or ) on the bottom right of your desktop. You will find the signal from the Wi-Fi Repeater. Click on ‘Connect’ and wait for a few seconds.
  3. Open a web browser and type http://192.168.10.1 in the browser’s address box. This numberis the default IP address for this device.

Note: Please check whether the WiFi Repeater accord with the factory default settings once you can’t download http://192.168.10.1. If you are still not sure what reasons, you can reset the Wifi Repeater, just need to press the reset button for 10 seconds, then try again.

4. The login screen below will appear. Enter the “Username” and “Password” then click “OK” to login. The default Username is “admin” and Password is “admin”

5. After logging in, you will see the web page below: Click on “Repeater” to continue.

6. Select your Wireless SSID to continue.

7. When you see below, please do not change any setting but only insert the key of your network.

Click on “Apply” button. The Repeater will restart.Wait for a few seconds your Wi-Fi Repeater is ready for use.

* The default wireless SSID and Security key of Wi-Fi Repeater is same as your AP/router.

B. Configure the Wi-Fi Repeater with RJ45 Cable.

  1. Plug the Wi-Fi Repeater to a wall socket. Connect your computer / laptop with the Wi-FiRepeater with enclosed RJ45 Cable.
  2. Follow process A3 to A7 to configure your Wi-Fi Repeater.

C. Configure the Wireless AP Mode.

  1. Plug the Wi-Fi Repeater into a wall socket.
  2. Follow process A3 to A4.
  3. Click on “AP” to continue.

4. The following message will be displayed on your web browser:

Click on ‘Apply’ button. The Repeater will restart.Wait a few seconds your Wi-Fi Repeater is ready for use.

How to connect your computer/laptop with the Wi-Fi Repeater

Adding a Wireless computers to the WiFi-Repeater

  1. Log on to the computer.
  2. Open Connect to a Network by right-clicking the network icon ( ) or ( ) in the notification area.
  3. Choose the wireless network from the list that appears, and then click Connect.
  4. Type the network security key or passphrase if you are asked to do so, and then click OK. You’ll see a confirmation message when you are connected to the network.

Adding a Wireless computers to the WiFi-Repeater

  1. Log in to the computer.
  2. Press the WPS button of the WiFi Repeater directly for 2-3 seconds.
  3. Press the WPS button on the Wireless Adapter directly for 2-3 seconds. Click Finish to completethe WPS configuration. (Please check your Wireless adapter Manual with WPS configuration).
  4. You should see icons , for the computer you added and for the other computers and devices that are part of the network.

Adding a Wireless computers to the WiFi-Repeater

  1. Plug the WiFi Repeater to a wall socket. Connect your computer / laptop with the WiFi Repeaterwith enclosed RJ45 cable.

Configuring via Web Browser

In AP mode and click “Wireless > Basic Settings” located at the web management interface, the following message will be displayed on your web browser:

You could configure the minimum number of Wireless settings for communication, such as Network Name (SSID) and Channel. The Access Point can be set simply with only the minimum settings items.

Click “Apply” button, The WiFi Repeater will restart.

Change Management password

Default password of Wireless Router is “admin”, and it’s displayed on the login prompt when accessed from web browser. There’s a security risk if you don’t change the default password, since everyone can see it. This is very important when you have wireless function enabled.

To change password, please follow the following instructions:Please click “Management > Password” menu on the web management interface, the following message will be displayed on your web browser:

If you want to keep original password unchanged, click “Cancel“.

Click “Apply” button, The WiFi Repeater will log off.

Firmware Upgrade

The system software used by this router is called as “firmware”, just like any applications on your computer, when you replace the old application with a new one, your computer will be equipped with a new function. You can also use this firmware upgrade function to add new functions to your router, even fix the bugs of this router.

Please click “Management > Upgrade Firmware” located at the web management interface, and then the following message will be displayed on your web browser:

Click “Browse” or “Choose File” button first; you’ll be prompted to provide the filename of firmware upgrade file. Please download the latest firmware file from our website, and use it to upgrade your router.

After a firmware upgrade file is selected, click “Upload” button, and the router will start firmware upgrade procedure automatically. The procedure may take several minutes, please be patient.

NOTE: Never interrupt the upgrade procedure by closing the web browser or physically disconnect your computer from the router. If the firmware you uploaded is corrupt, the firmware upgrade will fail, and you may have to return this router to the dealer of purchase to ask for help.

You can backup all Setting of this router to a file, so you can make several copies of router configuration for security reasons.

To backup or restore router setting, please follow the following instructions: Please click “Save/Reload setting” located at the web management interface, then the following message will be displayed on your web browser:

WEEE Directive & Product Disposal

At the end of its serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for or returned to the supplier for disposal.

Frequently asked questions (FAQ)

1. How do I reset the device to the factory default settings?To return to the factory defaults, press and hold the RESET button on the product for 10 seconds and restart the unit.

2. What types of computer network are supported?2.4 GHz wireless LAN, WPA2, WPA and WEP are supported

3. What can I do if I can’t connect?Press the reset button for 10 and then release it. The wireless signal light will turn off after 2-3 seconds. The third signal light is on and then off and the second signal light is on. The reset is now successful.

4. What speed does the WiFi amplifier provide?A speed of 300 Mbps.

5. How can I install the device as quickly and easily as possible?By using the WPS function, the device can be installed quickly and easily.

6. Is the device protected?Yes, the device is equipped with security. The password of the amplifier is ‘admin’. You can change the password by going to Management and then to Password in the menu.

7. Is the device available in other colors?No.

8. Does the device take up a lot of space?The device is 5 cm wide, 8 cm deep and 4 cm high.

9. How can I configure the device with an RJ45 cable?Plug the amplifier into a power outlet. After this, you can connect the computer or laptop to the WiFi amplifier with the supplied RJ45 cable.

10. Is there a plug included?Yes.

Contact

Any Questions?Contact us via:

WiFi Repeater 

  • Improves wireless coverage
  • Improves wireless network signal range
  • 300 Mbps transmission speed

Like Our Product?

Help us and other buyers by writing a review on Bol.com

To submit a review:

  1. Go to the product retail page for the item on Bol.com
  2. Click Write a review in the Customer Reviews section
  3. Click Submit

 

 

References

[xyz-ips snippet=”download-snippet”]


Posted

in

by