Whynter 34 Bottle Freestanding Stainless Steel Wine Refrigerator with Display Shelf and Digital Control FWC-341TS User Manual

Table of Contents

Whynter 34 Bottle Freestanding Stainless Steel Wine Refrigerator withDisplay Shelf and Digital ControlModel # : FWC-341TSINSTRUCTION MANUAL

Congratulations on your new Whynter product. To ensure proper operation, please read this Instruction Manual carefully before using this product. Keep this manual in a safe place for future reference.

Safety Precautions

APPLIANCE SAFETYYour safety and the safety of others are very important to us.To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions

This is the Safety Alert Symbol. This symbol alerts you to potential hazards that may result in serious injury. All safety messages will follow the Safety Alert Symbol and either the words” DANGER” or “WARNING”.

Danger means that failure to heed this safety statement may result in severe injury or death.

Warning means that failure to heed this safety statement may result in extensive product damage, serious injury, or death.

Caution means that failure to heed this safety statement may result in minor or moderate injury, or property or equipment damage.

All safety messages will alert you to know what the potential hazard is, tell you how to reduce the chance of injury, and let you know what can happen if the instructions are not followed.

IMPORTANT SAFEGUIDES

Before the appliance is used, it must be properly positioned and installed as described in this manual, please read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow basic precaution, including the following:

Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do not use an extension cord.
Do not use if the power supply cord is damaged. If damaged, it must be replaced by a qualified electrician.
It is recommended that a separate circuit, serving only your appliance be provided. Use receptacles that cannot be turned off by a switch or pull chain.
Never clean appliance parts with flammable fluids or harsh chemicals. These fumes can create a fire hazard or explosion.
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of the appliance or any other appliance.
Before proceeding with cleaning and maintenance operations, make sure to unplug the appliance.
Do not connect or disconnect the electric plug with wet hands.
Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.

FOLLOW WARNING CALL OUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL

Use two or more people to move and install the appliance. Failure to do so can result in injury.
When positioning the wine refrigerator, ensure that there is at least a 4” clearance at the sides and a 6” clearance at the back.
Please note that this is a freestanding appliance and should not be placed into a built-in space. Even with the recommended clearance, there may not be adequate airflow.
It is recommended that you install the wine refrigerator in a place where the ambient temperature is between (68°F- 78°F). This appliance must be installed in an area protected from the element, such as wind, rain, water spray or drips.
The appliance should not be located next to ovens, grills or other sources of high heat.
The appliance must be installed with all electrical connections in accordance with state and local codes.
The fuse (or circuit breaker) size should be 15 amperes.
It is important for the appliance to be leveled in order to work properly. For a stable installation, make sure the appliance is placed on a flat, level and solid surface.
Ensure that the surface on which the appliance is placed is strong enough to hold the appliance and the items stored inside.
This appliance is not intended for use by young children or physically-challenged persons without supervision/assistance. Young children must be supervised to ensure safety around this or any appliance.
Do not use solvent-based cleaning agents of abrasives on the interior. These cleaners may damage or discolor the interior.
Keep fingers out of the “pinch point” areas. Clearance between the doors and between the doors and cabinet are necessarily small. Be careful closing doors when children are in the area.
Close the wine refrigerator immediately after putting in any items to keep the internal temperature relatively constant.
Avoid placing any objects on top of the appliance.
This is an electrical appliance, to avoid injury from electrical shock does not operate the unit with wet hands while standing on a wet surface or while standing in water. Do not use outdoors or in wet conditions.
When positioning or moving the appliance, ensure that it is not turned up side down or unleveled greater than 45°.
Never pull the power cord to disconnect it from the outlet. Grasp the plug and pull it from the outlet.
Never lift, carry or drag the appliance by the power cord.
This appliance is designed for household, non-commercial use only. Any other use will void the warranty.
Do not plug into the power outlet before setup is completed.
Do not cut or remove the ground prong from the power cord.
Do not move this appliance without emptying it and securing the door in a closed position.

Parts

Product Features

FEATURES

34 standard 750ml wine bottles
Freestanding installation
Stainless steel trimmed glass door with sleek black cabinet
Touch screen control with a temperature range from 39°F – 65°F.
Environmentally friendly refrigerant
Tempered double-pane glass for enhanced UV protection
Soft interior LED lighting with on/off switch
Internal fan-forced circulation for even temperature distribution throughout the cabinet
Cylinder lock and two keys
Fahrenheit and Celsius degree temperature indicators
6 removable wooden flat slide out shelves
1 wooden display shelf
1 wire gate

SETUP A

Shelf One through Five: 25 bottles
Bottom Section: 5 bottles (wooden display shelf installed, 6th shelf removed)

SETUP B

Shelf One through Six: 30 bottles
Bottom Section: 4 bottles (wire gate installed)

TECHNICAL DATA

Important Safety Instructions

WARNINGTo reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions:

Read all instructions before using the appliance.
DANGER or WARNING: An empty wine refrigerator can be hazardous for children or small pets. If disposing of the wine refrigerator, remove gasket seals, latches, lids, or the entire door from your unused appliance, or take other action to ensure the appliance is harmless.
Never allow children to operate, play with, or crawl inside the appliance.
Never clean appliance parts with flammable fluids or harsh chemicals. The fumes can create a fire hazard or explosion.
Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.

BEFORE USING YOUR APPLIANCE

Remove the exterior and interior packing.
Clean the interior surface with lukewarm water using a soft cloth.
Before connecting the appliance to the power source, let it stand upright for approximately 4 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.

INSTALLATION OF YOUR APPLIANCE

WARNING: Do not store or install the appliance outdoors.
CAUTION: This appliance is designed for storing and cooling beverages or wine. Do not store perishable food, medicine or other medical products.
Place your appliance on a hard and level floor that is strong enough to support it when it is fully loaded.
To level your appliance, adjust the legs(1 large leveling leg and 1 small leveling leg under the door hinge) at the bottom of the appliance if needed.
When positioning this freestanding wine refrigerator, ensure that there is at least a 4” clearance at the sides and a 6” clearance at the back. Please note that this is a freestanding appliance and should not be placed into a built-in space. Even with the recommended clearance, there may not be adequate airflow.
We do not recommend installing the appliance on carpet.
Ensure that the condensation tube is directed into the drip tray located at the back of the unit to prevent leakage.
Do not install the appliance near an oven or other heating source. Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. For best performance, do not install the appliance behind a cabinet door. Extreme cold ambient temperatures may also cause the appliance not to perform properly.
Avoid locating the appliance in area that may be exposed to excessive moisture.
Plug in the appliance into an exclusive, grounded wall power outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a qualified electrician or an authorized service center.

ELECTRICAL CONNECTIONThis appliance requires a standard 115/120 Volt AC ~/60Hz electrical ground outlet with three-prong. Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded? The cord should be secured behind the appliance and not left exposed or dangling to prevent accidental injury. The appliance should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating label on the appliance. This provides the best performance and also prevents overloading house wiring circuits that could cause a fire hazard from overheated. Never unplug the appliance by pulling the power cord. Always grip the plug firmly and pull straight out from the receptacle. Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. When moving the appliance, be careful not to damage the power cord.

EXTENSION CORDBecause of potential safety hazards, it is strongly recommended that you do not use an extension cord with this appliance. However, if you must use an extension cord, it is absolutely necessary that it be a UL/CULListed, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord is 115 volts and at least 10 amperes.

Operation and Controls

OPERATING THE WINE REFRIGERATORRecommend Temperature Settings

It is recommended that you install the wine refrigerator in a place where the ambient temperature is between (68°F – 78°F). If the ambient temperature is above or below recommended temperatures, the performance of the unit may be affected. For example, placing in extreme cold or hot conditions may cause interior temperature to fluctuate thus the set temperature may not be achievable.

CONTROL PANEL

SETTING THE TEMPERATUREThe temperature range can be set between 39ºF – 65ºF (4ºC – 18ºC). To set the desired temperature, press the button to lower the temperature or button to raise the temperature on the control panel. The temperature display will flash for 5 seconds indicating that the desired temperature is set and will revert back to its actual internal temperature.

NOTE:

The temperature inside the wine refrigerator is dependent on the ambient temperature (room temperature).
The cooling icon is illuminated when the cooling cycle unit is in operation. Once the unit reaches the set temperature, the cooling icon will shut off.

INTERIOR LIGHT / ºC and ºF SELECTORYou can turn on and off the interior light by pressing the Light button on the control panel. To changetemperature conversions press thebutton to switch between temperature conversions.

LEVELING THE APPLIANCEIt is important for your appliance to be leveled in order to work properly. It can be raised or lowered by rotating each of the feet on the bottom of the machine. If you find that the surface is not level, rotate the feet until the appliance becomes level.You may need to make several adjustments to level it. We recommend using a carpenter’s level to check the machine.NOTE: The Whynter FWC-341TS has 1 large leveling leg and 1 small leveling leg under the door hinge.

Place a carpenter’s level on top of the product to see if the appliance is level from front to back and side to side.
Adjust the height of the feet as follows: Turn the leveling feet to the right to lower that side of the refrigerator. Turn the leveling feet to the left to raise that side of the refrigerator.

INSTALLING STAINLESS STEEL HANDLESThis appliance includes stainless steel handles that are not required to operate this appliance. To install the handles please follow the below instructions:

The gaskets are easily displaced by hand, no tools are necessary.
Use a flat-head screwdriver to remove the two preinstalled decorative plugs from the back of the doors. Some wine refrigerators have no decorative plugs.
Install the handles tightly as shown with two screws, lock washers, and flat washers provided. (DO NOT over tighten as this will cause damage to the handles and stainless steel door frames).
Replace the door gaskets to their original position.

WINE SHELVESThis wine refrigerator is equipped with 6 wooden removable shelves. To prevent damage to the door gasket, ensure the door is opened completely before sliding the shelves out.

To easily access the stored wine bottles, pull the shelves approximately ⅓” out of the railing.
When removing the shelves from of the railing, make sure all items are first removed.
To remove any of the shelves from the rail compartment, move the shelf to the position where the notch of shelf is exactly under the plastic post and then lift it up and out.
If the wine bottles are stored horizontally in the bottom section of the cabinet, ensure that the wire gate is installed to secure and prevent bottles from rolling out.
A maximum number of 5 wooden shelves can be utilized if the bottom wooden display shelf is used.

STORAGEWine bottles may differ in size and dimensions so the actual number of bottles that can be stored may vary. The 34 bottle capacity is an approximate maximum when storing traditional 750 ml bottles and includes bulk storage.

You may load your wine bottles in single row or by stacking while taking note of the following: if you do not have enough bottles to fill your wine refrigerator, it is better to distribute the load throughout the wine refrigerator so as to avoid “all on top” or “all below” type loads.
You can remove or relocate adjustable shelves to accommodate larger type of bottles.
Keep small gaps between the walls and the bottles to allow air circulation.
Do not cover any part of the shelves with aluminum foil or any other material that will prevent adequate air circulation within the cabinet.
Do not overload your wine refrigerator.
Avoid obstructing the internal fan (located inside on the top panel of the wine refrigerator).
Do not try to slide the shelves outwards beyond the fixed position to prevent the bottles from falling.
Do not pull out more than one loaded shelf at a time as this may cause the wine refrigerator to tilt forward if not properly installed.

NORMAL SOUNDSThe unit is cooled by a compressor. The compressor pumps coolant through the cooling system, producing operating noise. Even when the compressor cuts out, noises caused by changes in temperature and pressure are unavoidable. Operating noise will be most audible immediately after the compressor comes on. It becomes quieter as the operating period continues.

The following noises are normal and occur from time to time:

Gurgling sound, caused by the refrigerant flowing through the appliance’s coils.
Humming noise made by the compressor. This noise can get louder for brief periods when the motor is switching on.
Cracking/popping sounds, resulting from the materials contraction and expansion due to temperature variations.
Fan operating sound, to circulate the air within the wine cabinet.
Unusual noise is normally the result of improper installation.
Where the unit is installed in the open-plan kitchen or in partition walls, the level of operating noise will be heard more acutely. However, this is due to the surrounding architecture and not to the unit.

NOTE: An individual’s perception of noise is directly linked to the environment in which the unit is located, as well as the specific type of models. Our appliances are in line with international standards for such appliances and in line with the latest technical developments. Please remember that the noise of the compressor and the coolant circulating in the system is unavoidable.

Bottle Storage

30 BOTTLES LOADING PLAN (6th shelf removed, wooden display shelf used)

34 BOTTLES LOADING PLAN (6 wooden shelves, wire gate installed)

CLEANING YOUR APPLIANCE

Turn off the power, unplug the appliance, and remove all contents from the appliance and store them in a suitable place.
Clean the inside, the door seal and the inside of the glass with a clean, damp cloth.
Never use detergents or other substances that emit odors.
Always keep the door closed when cleaning the outside of the appliance. Make sure no detergent odors penetrate into the appliance.
Clean the side panels and door surfaces with a clean and soft cloth. If necessary, use a moist cloth. Alternatively, use a microfiber cloth.
The humidity tray should be hand-washed with water and detergent. After cleaning, always make sure the tray is thoroughly rinsed with clean water before replacing.

PREMISES POWER FAILURE

In the event of a power interruption, temperature settings automatically defaults to factory settings once power is restored.
Factory default temperature setting is 53ºF. To set a different desired temperature, refer to the “SETTING THE TEMPERATURE” and “ºC and ºF SELECTOR” section on page 8.
Most power failures are corrected within a few hours and should not affect the temperature of your appliance if you minimize the number of times the door is opened. If the power is going to be off for a longer period of time, you need to take the proper steps to protect your contents.

VACATION TIME

Short vacations: Leave the appliance operating during vacations of less than two days.
Long vacations: If the appliance will not be used for an extended period, remove all items and turn off the appliance. Clean and dry the interior thoroughly.

MOVING YOUR APPLIANCE

Remove all items inside the appliance.
Securely tape down (we recommend using painter’s tape) all loose items (shelves) inside your appliance.
Turn the adjustable legs up to the base to avoid damage.
Tape (we recommend using painter’s tape) the door shut.
Be sure the appliance stays secure in the upright position during transportation and protect the exterior of the appliance with a blanket, or similar item.

PREPARING FOR STORAGEIf the wine refrigerator will not be used for a long time or is to be moved to another place, it will be necessary to defrost the unit and dry the interior.1. Disconnect the wine refrigerator from the power supply by removing the power plug from the wall socket.2. Leave the door open to allow for air circulation and to prevent mold, mildew, and unpleasant smells.

CAUTION: Store the unit out of the reach of children. If you have children, you may want to take additional precautions such as removing the door to prevent a child from being trapped inside the wine refrigerator

NOTE:

If the wine refrigerator is unplugged, encounters power loss, or turned off; you must wait for 3 to 5 minutes before restarting the wine refrigerator.
When the wine refrigerator is used for the first time or restarted after having been shut off for a long time, there could be a few degrees variance between the temperature you select and the one indicated on the display. This is normal and is due to the length of the inactivation time.

ENERGY SAVING TIPS

The appliance should be located in the coolest area of the room, away from heat-producing appliances, and out of any direct sunlight.
Ensure that the appliance is adequately ventilated. Never obstruct the air vents.
Close the door tightly and do not open the appliance too frequently or for a long period of time.
Store the content in an organized way.
Do not overload the appliance to allow air to circulate.

TRANSPORT OF THE WINE REFRIGERATORThe ideal packaging for the wine refrigerator is its original packaging. Please keep the original packaging handy and repack the wine refrigerator if you need to transport the unit.

DEFROSTINGUnder most ambient conditions, the wine refrigerator does not need to be defrosted. In cold ambient temperatures and/or high humidity, some frost may build up. To defrost, remove all items, unplug the wine refrigerator and leave the door open. Never use a knife or other metal instrument to scrape ice/frost. After defrosting, plug in the wine refrigerator and set the desired temperature.

Troubleshooting

ONE YEAR LIMITED WARRANTY

This Whynter Freestanding Wine Refrigerator is warranted, to the original owner within the 48 continental states, for one year from the date of purchase against defects in material and workmanship under normal use and service. Should your Whynter Freestanding Wine Refrigerator prove defective within one year from the date of purchase, return the defective part or unit, freight prepaid (within two months of purchase; after two months to one year, the customer will be responsible for freight cost to Whynter’s service department), along with an explanation of the claim to Whynter LLC. Please package the Whynter Freestanding Wine Refrigerator carefully in its original packaging material to avoid damage in transit. Please retain the original box and packaging material. Under this warranty, Whynter will repair or replace any parts found defective. This warranty is not transferable. After the expiration of the warranty, the cost of labor and parts will be the responsibility of the original owner of the unit.

THIS WARRANTY DOES NOT COVER:

Acts of God, such as fire, flood, hurricanes, earthquakes, and tornadoes.
An improper power supply such as power surge, low voltage, defective household wiring, or inadequate fuses.
Use in commercial or industrial applications
Damage, accidental or otherwise, to the wine refrigerator while in the possession of a consumer not caused by a defect in material or workmanship;
Damage caused by consumer misuse, tampering, or failure to follow the care and special handling provisions in the instructions.
Damage to the finish of the case, or other appearance parts caused by wear.
Damage caused by repairs or alterations to the product by anyone other than authorized by the manufacturer.
Removal, Replacement Packaging, Freight, and Insurance cost for the warranty service.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIESCUSTOMER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR OR REPLACEMENT AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE YEAR. WHYNTER SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN LIMITED WARRANTY OR ANY IMPLIED WARRANTY. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES, SO THESE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WRITTEN WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.

Please retain the original proof of purchase in order to obtain warranty services. Warranty begins from the original date of purchase.

Whynter 34 Bottle Freestanding Stainless Steel Wine Refrigerator with Display Shelf and Digital Control FWC-341TS User Manual – Whynter 34 Bottle Freestanding Stainless Steel Wine Refrigerator with Display Shelf and Digital Control FWC-341TS User Manual –

[xyz-ips snippet=”download-snippet”]

Posted

2023-01-10

Whynter

admin

Tags:

34 Bottle Freestanding Stainless Steel Wine Refrigerator with Display Shelf and Digital Control, FWC-341TS, Whynter