Whynter RPD-551EWP 50 Pint High Capacity up to 4000 sq ft Portable Dehumidifier
Congratulations on your new Whynter product. To ensure proper operation, please read this Instruction Manual carefully before using this product. Keep this manual in a safe place for future reference. |
DISPOSAL INFORMATION
Thank you for choosing the Whynter Portable Dehumidifier. Please follow the instructions provided in this user guide to obtain the very best performance from your dehumidifier. We trust that your Whynter dehumidifier will provide the performance and reliability that we stand for. Your Whynter dehumidifier is designed to remove moisture in the air by con dentation removal and collecting the condensation water in the internal water bucket or draining through a drain hose. Please keep this user manual in a safe place for future reference.This symbol on the product or its packaging indicates that the appliance can not be treated as normal domestic trash, but must be handed in at a collection point for recycling electric and electronic appliances. Your contribution to the correct disposal of this product protects the environment. Further information about the recycling of this product can be obtained from your local municipal authority.
TABLE OF CONTENTSDISPOSAL INFORMATION I. SAFETY PRECAUTIONS II. INTRODUCTION Ill. PARTS AND CONTROLS IV. OPERATION INSTRUCTIONS V. CONTINUOUS DRAINAGE VI. MAINTENANCE VII. TIPS ON WHEN TO USE YOUR PORTABLE DEHUMIDIFIER VIII. TROUBLESHOOTING WARRANTY INFORMATION
SAFETY PRECAUTIONS
WARNING | TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY WHEN USING YOUR PORTABLE DEHUMIDIFIER, FOLLOW THESE BASIC PRECAUTIONS: |
THE MANUFACTURER DISCLAIMS ANY RESPONSIBILITY IF THE ABOVE INSTRUCTIONS ARE NOT FOLLOW |
INTRODUCTION
How it Works
When the dehumidifier is started, the fan begins to pull moisture-laden air across the dehumidifying coils. The coils condense or draw moisture from the air, and air flows through the top louver into the room as dry, warm air. Moisture removed from air is collected in a water bucket on the front of the dehumidifier.
The appliance is designed to operate between 41 °F (5°C), and 96°F (35°C). The “Compressor” circuit has an automatic 3 minute time delayed start if the appliance is turned off and on quickly. This prevents overheating of the compressor and possible circuit breaker tripping. Make sure the water bucket is fitted correctly otherwise appliance will not turn on.
Energy Saving Guide
This Whynter dehumidifier is an Energy Star rated appliance. Follow the guide below can help to get the best performance and efficiency from your dehumidifier.
• Do not cover the air intake and outlet.• Do not place the appliance in front of curtains or drapes- to ensure they do not obstruct the air intake.• Keep curtains, blinds or drapes closed during the sunniest part of the day.• Close all windows and doors.• Indoor relative humidity should ideally be kept between 35%RH and 60%RH depending on the ambient temperature.• Make sure the appliance is on a hard and level surface.• To prolong the compressor’s life, please wait at least 3 minutes before turning the appliance back on after shutting it off.• Inspect and keep the air filter clean by cleaning regularly.• Perform routine maintenance.
TECHNICAL DATA
MODEL: | RPD-551EWP |
Dehumidifying capacity | 50 pints / day |
Drain bucket capacity | 18 pints |
IEF (Liters per kW-Hour) | 1.8 L/kWh |
Power supply | 115v / 60Hz |
Maximum power input | 980 watts |
Current Consumption | 8.8 Amps |
Refrigerant | R-41QA I 13.4oz |
Air flow M3/H / CFM | 330 M3/H / 194.23 CFM |
Fan speeds | 2 (H & L) |
Unit Dimensions | 23.25″ H x 15″ W x 12″ D |
Unit Net Weight | 41 lbs |
Unit Gross Weight | 47.6 lbs |
PARTS AND CONTROLS
Auto Shut OffWhen the selected humidity level is reached, the dehumidifying function will shut off automaticallyEnergy SaverOnce the RH% is reached, the fan will still run continuously to avoid high start-up amperage which makes the unit energy-efficientAuto-RestartIn the event of a power outage, appliance restarts at the previously set function mode and settings when power is restored (not applicable to Timer Function)Timer Delay Switch OffWhen the appliance is ON, press the Timer button to activate Auto-stop function and the Timer light will come on.
Set the desired time delay OFF hours by pressing the UP and DOWN and buttons. The time increments are 1 hour up to 24 hours. When the delay time set has elapsed, the appliance switches off. To cancel the delayed switch off function, set the time to “00” or turn off the appliance.
Timer Delay Switch OnWhen the appliance is OFF, press the Timer to activate Auto-start function and Timer light will come on. Set the desired time delay ON hours by pressing the UP and DOWN and buttons. The time increments are 1 hour up to 24 hours. When the delay time set has elapsed, the appliance turns on. To cancel the delayed switch on function, set the time to “00” or turn off the appliance.
OPERATION INSTRUCTIONS
AIR FILTERS INSTALLATION
Your Whynter portable dehumidifier is equipped with a removable and washable filter. The filter removes large particles such as dust, pet hair and dander.
WARNING: NEVER OPERATE THE DEHUMIDIFIER WITHOUT THE FILTER
START OPERATION
- Ensure that the appliance is connected to the power socket
- Make sure the water bucket is placed in proper position.
- Make sure filter is installed
- When the unit is turned on for the first time, if the bucket full lamp lights up, just pull out the water bucket then push it back to the proper position.
- Set the relative humidity level RH% by pressing the up and down buttons. We recommend setting the RH% to at least 10% lower than the current RH%.
WHEN BUCKET FULL LAMP IS ON
The appliance will run continuously until the set RH% is reached or when the water bucket is full. When the water bucket is full, the Bucket Full indication lamp will light up and the dehumidifier will stop operating. Remove the water in the bucket with two hands, then place the water bucket back to it’s proper position the machine will start operating again. This light will also illuminate when the bucket is removed or not properly inserted.
DEFROST
In the event frost builds up on the evaporator coils, the compressor will cycle off and the fan will continue to run until the frost is evaporated. This happens when the appliance is operating in low temperatures (less than 53° F or 12°C), which affects the efficiency of the dehumidifier. When this happens, the defrost lamp will turn on and the machine will go into periodic defrost mode automatically. Defrost time may vary. If the dehumidifier freezes up, turn the appliance off for few hours and then restart. The appliance will not operate satisfactorily if the room temperature is below 41° F
OPERATION INSTRUCTIONS
POSITIONING THE UNIT
- This dehumidifier is intended for indoor residential applications only and should not be used for commercial or industrial applications.
- Place the dehumidifier on a smooth, hard and level floor strong enough to support the appliance with a full bucket of water. Do not attempt to roll the appliance over objects. Avoid placing the appliance in an area where the temperature will fall below 53° F. The coils may become covered with frost and may reduce
- performance. Do not place the appliance near clothes dryer, heater or radiator.
- Shut all doors, windows and openings to your target dehumidifying space for maximum performance
- Allow at least 10″ of air space on all sides of the appliance for good air circulation and 20″ or more above the appliance
NOTE
|
CONTINUOUS DRAINAGE
WATER PUMP METHOD
One of the key features of this unit is that it has a water pump that pushes water up or over a longer distance. Using this feature will enable your unit to run maintenance free, and you will no longer have to empty a heavy reservoir filled with water or worry about draining your unit using gravity.
INSTALLATION OF HOSE
This unit comes with a 16.5 ft. water pump hose. Once installed, the continuous drain outlet is bypassed and the water pump motor is activated.
- Firmly insert the water pump hose to the outlet.
- A click sound will be heard to confirm that the hose is properly attached
- Place the other end of the hose in a floor drain where water can be expelled.NOTE: Water pump motor will not activate and work if water bucket is full. Make sure water bucket is empty or not full when using this drain method.
GRAVITY METHOD
This dehumidifier also comes standard with a 3 ft. drain hose. To use gravity to drain your portable dehumidifier, it must be installed on a level surface or at least 12 inches above the ground, on a sturdy table or shelf unit. When using the function of continuous drainage, the hose must be placed horizontally below the drainage hole. Avoid uneven ground and folding the hose.
1. You can use the supplied drain hose to connect to the continuous drainage connector. | |
2. Unscrew and remove the drain cover at the rear of the appliance.3. Remove the soft rubber stopper. Put it into the water bucket for safe keeping. | |
4. Insert the drain hose through the hole of the drain cover. | |
5. Connect the drain hose to the drain port | |
6. Tighten the drain cover in clockwise direction on to the rear of the appliance. | |
7. Place the bucket on its original location. |
NOTE: When using continuous drainage setup, there may be some water collected in the water in the drain bucket
MAINTENANCE
ALWAYS turn off and unplug the dehumidifier before cleaning.
- Cleaning the air grille and main unit● Use a damp cloth to wrap the main unit or use water and a mild detergent. Do not use bleach, chemicals or abrasives.● Do not splash water directly onto the unit. Doing so may cause an electrical shock, cause the insulation to deteriorate, or cause the unit to rust.● Use a vacuum attachment or brush to clean the air intake and outlet grilles
- Cleaning the bucket● Clean the bucket to prevent growth of mold, mildew and bacteria every two weeks.● Fill the bucket with clean warm water and add mild detergent to the water.● Dry thoroughly before reinserting the bucket to the main unit. NOTE: Do not clean the bucket in a dishwasher.
- Cleaning the air filterTo ensure the air intake is filtered properly and to assure that your dehumidifier runs efficiently, it is recommended to clean the air filter at least once every two weeks.● Remove the bucket and pull filter downwards● Use a vacuum cleaner or tap the filter lightly to remove loose dust and dirt.● Rinse the air filter under warm or cold running water● (no hotter than 100 ° F.)● Dry thoroughly before reinserting the air filter.● Reinstall the air filter and replace bucket securely
- End of Season Storage● After turning off the unit, wait 24 hours before emptying the bucket to allow excess moisture to drain into the bucket.● Clean the main unit, water bucket and air filter as detailed above.● Cover the unit with the original plastic bag that came with the unit or any appropriate dust cover.● Store the unit upright in a dry, well-ventilated place.
TIPS ON WHEN TO USE YOUR PORTABLE DEHUMIDIFIER
If you have respiratory problems, asthma and allergies, your Whynter RPD-551 EWP portable dehumidifier is a great option for controlling moist environments. Creating dry air can keep indoor air pollutants at a more manageable level, especially when used in conjunction with an air purifier. Using your portable dehumidifier can help you save money in the long run because it uses relatively little power and can help furnaces and air conditioners operate more efficiently.
- Excess moistureIndoor environments with excessive moisture can cause mold and fungus to thrive inside the walls and beneath the carpet. Many types of mold are potentially dangerous and can lead to health problems. The Whynter RPD-551 EWP portable dehumidifier reduces the amount of moisture in the air inside a home, which makes it far more difficult for harmful mold to grow. This portable dehumidifier is also effective for a small area, such as a hallway or a child’s bedroom.
- Respiratory problems or allergiesThe Whynter RPD-551 EWP is a 50-pint portable dehumidifier which is perfect for larger rooms or areas in your home, including a living room or family room. If your home is musty, you will want to use your portable dehumidifier, especially if you have respiratory trouble or allergies. This unit can also help relieve symptoms by controlling the relative humidity inside your home and a good idea in general if your home has such underlying problems as a leaky foundation walls or inade-quate ventilation or if you live in a humid area. By keeping the relative humidity indoors below 50 percent, you can keep allergy-inducing dust mites and mold from thriving.
- BasementsIf you have a basement that is below-grade, you should use your Whynter RPD-551 EWPportable dehumidifier. This dehumidifier will help you keep the moisture levels in your basement down to manageable levels. By doing this, you can help keep your indoor furnace operating efficiently and even help eliminate minor standing-water problems. Your portable dehumidifier also can help keep furniture and valuables dry, and it will help keep electronics in proper working order.
- Humid climatesIn humid climates, such as areas near a beach or large body of water, your Whynter RPD-551 EWP portable dehumidifier can help keep the environment in your home at a more comfortable level. While the actual temperature won’t be affected, you’ll sleep more comfortably and may actually save money, since your unit can keep the indoor humidity and, thus, your thermostat under control.
TROUBLESHOOTING
Problem | Possible Causes | Solutions |
The dehumidifier does not operate |
|
|
The dehumidifier runs too much |
|
|
The dehumidifier runs but the room is not dry enough. |
|
|
Frost appears on the coils above the bucket. |
|
|
The dehumidifier makes loud noise. |
|
|
The dehumidifier leaks. |
|
|
TROUBLESHOOTING – ERROR CODES
Error Code | Reason |
“30%RH” | Humidity Sensor has an open circuit or humidity is less than 30% |
“90%RH” | Humidity Sensor has short circuit or humidity is higher than 90% |
“Lo” | Temperature is lower than 32° F or temperature sensor has an open circuit |
“Hi” | Temperature is higher than 122° F or temperature sensor has a short circuit |
ONE YEAR LIMITED WARRANTY
This WHYNTER product is warranted to the original owner, purchased from an authorized Whynter dealer within the 48 U.S. continental states, for one year from the original purchase date against defects in material and work manship under normal residential usage. Should your WHYNTER product prove defective within one year from the date of purchase, contact Whynter’s Customer Support team with the serial number and proof of purchase to make a warranty claim. A Return Authorization number must be issued before returning any parts or products. Parts or products received without a Whynter issued Return Authorization number will be refused. Under this warranty, Whynter will repair or replace any parts found defective with new or remanufactured parts or exchange the defective product with a new, refurbished, or remanufactured product at our discretion. All defective products and parts covered by this warranty will be repaired or replaced on a mail-in basis to Whynter’s Service Center. This warranty is not transferable. After the expiration of the warranty, the cost of labor and parts will be the responsibility of the original owner.
Return freight is prepaid by Whynter within two months of purchase. After two months to one year, the customer will be responsible for the return freight cost to Whynter’s Service Center. Please package the product carefully in its original packaging to avoid damage in transit. Whynter is not responsible for damage resulting from shipper mishandling or improper packaging. Please retain the original box and packaging materials.
THIS WARRANTY DOES NOT COVER:
- Acts of God, such as fire, flood, hurricanes, earthquakes and tornadoes.
- Improper power supply such as power surge, low voltage, defective household wiring or inadequate fuses.
- Use in commercial or industrial applications.
- Damage, accidental or otherwise, to the product while in the possession of a consumer not caused by a defect in material or workmanship.
- Damage caused by consumer misuse, tampering, lack of maintenance or failure to follow the care and special handling provisions in the instructions.
- Damage to the finish of the case, or other appearance parts caused by wear.
- Damage caused by repairs or alterations to the product by anyone other than authorized by the manufacturer.
- Removal, Replacement Packaging, Freight and Insurance cost for the warranty service.
- Products sold AS IS or from an unauthorized reseller. · Products that have had their serial numbers removed or defaced.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIESCUSTOMER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR OR RE PLACEMENT AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTA BILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE YEAR. WHYNTER SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN LIMITED WAR RANTY OR ANY IMPLIED WARRANTY. SOME STA TES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIM/TATION OF INCI DENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES, SO THESE LIMITA TIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WRITTEN WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.
The warranty, product contents and specifications are subject to change at any time without notice; please refer to www.whynter.com for the most current information.
To register your warranty, please visit www.whynter.com and fill out the online Warranty Registration form. Please be sure to include a copy of your purchase invoice.
To obtain service or information, contact Whynter LLC via email at [email protected] or call 866-WHYNTER (866-949-6837).Product contents and specifications may change without notice.Copyright© 2020 Whynter LLCWWW.WHYNTER.COM
References
[xyz-ips snippet=”download-snippet”]