willful M98 Bluetooth Wireless Headset User Manual
willful M98 Bluetooth Wireless Headset User Manual
willful M98 Bluetooth Wireless Headset User Manual
Product Specification
| Item No. | M98 |
| Bluetooth Version | V5.0,Classll |
| Chipset Solution | CSR BC8615 |
| Operation Frequency | 2.402 – 2.480GHz |
| Standby Time | About 200 hours |
| Charging Time | About 2 hours |
| Bluetooth Profile | A2DP AVRCP HFP HSP |
| Battery Capacity | 180mAH Rechargeable lithium battery |
| Charger | 5V DC s200mA |
| Work Temperature | -10 55 C |
| Net Weight | About 49.5 g |
| Charging seat net weight | About 242 g |
Product Overview
Basic Operation
For the first using, please fully charged the model M98
- 3.1 Power on: Long press MFB 3 seconds to power on
- 3.2 Power off: Long press MFB 3 seconds to power off
- 3.3 Pairing Mode: Make sure headset is in OFF state, press and hold the MFB button for about 6 seconds, until the indicator light alternates between blue and red, indicating that it is in pairing mode. If the headset never connected with any device before, just long press the MFB button for 3 seconds into pairing mode
- 3.4 Play / Pause: Short press MFB to play or pause when playing music
- 3.5 Answer / Hang up / Reject a call When call coming , short press MFB to answer or hang up a call, long press to reject a call 3.6 Audio Switching: When calling, Long press MFB 1 second to choose the audio from headset .
- 3.7 Redial the last call: Standby mode, double press MFB to redial the last call .
- 3.8 Voice dialing: Standby mode, long press MFB 1 second to start voice dialing
- 3.9 Next song: When playing music, long press Volume + to next song
- 3.10 Last song: When playing music, long press Volume – to Last song
- 3.11 Volume up: When playing music / calling, short press Volume + to control the volume up
- 3.12 Volume down: When playing music / calling, short press Volume -to control the volume down
- 3.13 Microphone Mute: When calling, short press Microphone mute key to mute, do again to cancel mute
Bluetooth Pairing and Connection
- Make sure the headset is in Off state, long press the MFB button for about 6 seconds, until the indicator light alternates between blue and red, indicating that it is in pairing mode. If the headset never connected with any device before, just long press the MFB button for 3 seconds to power on and into pairing mode
- Search and click to connect “M98″on the phone Bluetooth device lists , LED turns to Blue LED flash once every 10 seconds after connected , could playing music or making calls from the phone to the headset.
Multi Point Connection
- A. Follow El; & E2.) to connected with the first device (phone, PC, laptop etc) , turn off the Bluetooth function of the first device.
- B. Turn off the headset and turn on again to enter into pairing mode, search and click to connect “M98″on the second device (phone, PC, laptop etc.) Bluetooth device lists. LED turns to low Blue LED flash once every 10 seconds after connected.
- C. Turn on the Bluetooth function of the first device, research and reconnect M98 on it. The headset will connect with two devices after connected with the first one.
Notes:
Could only play music from one phone for multi point connection, need to stop one to play another.
Charging
Please charge M98 when it low battery with Red LED flash. Charging time about 2 hours with solid Red LED. Solid Blue LED when it full charged.
Connection for charging
Use charging cable to connect M98 and insert into USB charger (Car charger , power bank , computer USB etc) to charge the item
M98 How to use the charging stand
Please place the M98 on the charging base and contact it, Then connect to the charging port on the charging base through the Micro USB head of the Micro USB charging cable, USB head to USB charger (car charger, travel charger, computer USB, etc.)
Notes:
Please charge M98 at least once every two months when without use. Please use the original charging cable to charge the item.
LED Indicator
| Status | LED Indicator |
| Power on | Blue light for 1 second |
| Power off | Red light for 1 second |
| Pairing mode | Red and Blue LED flash alternately |
| Unconnected standby mode | Blue light flashes once every 2 seconds |
| Connected standby mode | Blue light flashes once every 5 seconds |
| Music playing mode | Blue light flashes once every 5 seconds |
| Calling mode | Blue light flashes once every 5 seconds |
| Delete paired records | Red and blue lights flash 1 time |
| Low battery | Red LED flash |
| Charging | Solid Red LED |
| Full charged | Solid Blue LED |
Packaging Contents:
- A. M98 Wireless Headphone 1 pcs
- B. Wireless Headphone Charger 1 pcs
- C. Micro USB charging cable 1 pcs
- D. Manual 1 pcs
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FAQS
Multi point connection
Could only play music from one phone for multi point connection, need to stop one to play another .
Automatic power off
M98 will automatic power off when unconnected with any devices in 10 minutes.
How to reconnect?
M98 will reconnect automatic with the paired devices when power on. If it can not reconnect automatically, please find the M98 in your Bluetooth device list and connect it manually.
How to delete the paired records?
In the power-on state,press and hold the volume “+” button and the volume “-” button at the same time for 5 seconds to clear the pairing record. When the indicator light flash in red and blue for once simultaneously ,then the pairing record has been cleared,and the headset will not be connected to the previously connected device automatically.Please try to clear the pairing record once there are any connection errors.
Password for connect?
Please try 0000 (four zero ), 8888 (four eight ), 1111 (four one), 1234 (one two three four) as password for connection when need for some devices.
Charging power supply?
Charging power supply: 5V, ?.500 MAH. (Charger, car charger, computer USB etc.)
What is the advantage of using single-point microphone?
report this adUsing a single-point microphone can effectively reduce the ambient noise so that the other party can clearly hear your own voice and improve the quality of the call. The call effect is far superior to that of an ordinary omnidirectional microphone (a structure with a microphone bar is required, otherwise the speaking voice Will be smaller)
Turn off the headset and turn on again to enter into pairing mode, search and click to connect “M98″on the second device (phone, PC, laptop etc.) Bluetooth device lists. LED turns to low Blue LED flash once every 10 seconds after connected.
Wireless Headphones, P47 Bluetooth Over Ear Foldable Headset with Microphone Stereo Earphones 3.5mm Audio Support FM Radio TF for PC TV Smart Phones & Tablets etc (Green)
Please check if the headset is in pairing mode. If yes, please try to pair it with your phone again. If no, please charge it for a while and then try again.
Please check if your phone supports A2DP function. If yes, please check if your phone supports AVRCP function. If yes, please check if you have paired your phone successfully with this headset. If not, please reset your headset to factory default settings and then pair it with your phone again.
This may be caused by weak signal strength due to distance between Bluetooth devices or obstacles blocking signal path between them. In this case, move closer to the Bluetooth device or remove obstacles between them to restore signal strength; otherwise move away from these devices or turn off these devices to avoid interference. Or you can change the frequency of this device manually (Refer to manual).
Just take Willful T1 out of the charging case, the earbuds will pair with each other and enter pairing mode automatically, then turn on the bluetooth in your cellphone or other devices, click “T1” in bluetooth list to complete the pairing.
Support TF card and FM radio, Built-in Battery: With high performance rechargeable polymer battery, this headphon e provides 8-10 hours of music time, less than 1 hours of charging time FUNCTIONAL!
Tap the headphones listed. On an Android device, pull down the shade from the top of the phone and long-press the Bluetooth icon. It’ll bring you right to the Bluetooth menu where you can turn it on and then search for devices. Tap the name of the headphones you’re trying to pair.
Press and hold the power/pairing button on each earphone for up to 2-3 seconds to turn them on. You will hear a voice prompt with “Power On”.
When the earbuds are fully charged, the indicators of the charging box will go off. Please connect the Type-C plug of the Type-C charging cable to the Type-C charging port of the charging box; connect the USB plug to the USB charger (vehicle charger, portable charger, computer USB port, etc.).
Inspect the charging port of your headphones for any damage like bent connectors or bent metal. Also, make sure that the port itself isn’t loose when you touch it, as this could be a sign that the connectors have detached from the headset.
Even if Bluetooth is turned on, your phone itself might not be ‘discoverable’. This means that a Bluetooth device you haven’t yet paired cannot see your phone. To make it visible to other devices, open the main Bluetooth settings. On Android, phones remain discoverable so long as you stay on that screen.
For Android phones, go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile & Bluetooth. For iOS and iPadOS device, you’ll have to unpair all of your devices (go to Setting > Bluetooth, select the info icon and choose Forget This Device for each device) then restart your phone or tablet.
It is the middle of the “3” that you are referring to. It’s great because all functions are on the same side. The middle button also acts as the “answer and hangup” button if you are choosing to connect to your phone.
To charge Earbuds with a micro USB, you need to plug a Micro USB cable into your device and either into a computer or a USB adapter. Then you have to sit and wait until your earphones get fully charge.
Press the power button and hold it for 10 seconds. If the reset is successful, the LED light will blink to show that you have reset it. You may also reset the Bluetooth by pressing and holding the volume and mode down. While in other cases, you may need to press and hold both the volume up and volume down buttons down.
Pressing and holding the button 10 seconds with the lid open will reset the earbuds and erase all “memory data”.
VIDEO
[xyz-ips snippet=”download-snippet”]