User Manual 
M700
Function Illustration 
Main Function Description
Main Function Description- power switch/ volume control
- Model switch among Bluetooth, FM, TF card, USB driver, and volume remind;
- Play/PauseA: Short press ” ” to pause and press again to playB: In playing music mode, long pressed “” to store music with LCD screen shows “SRUE”C: Long press key to play the stored music and long press again to delete music
- Previous/volume-long press “” for fast reverse, short press to go to previous music; In headset mode, long press to volume-
- Next/volume+long press”” for fast forward, short press to go to next music; In headset mode, long press to volume+
- Recording
- USB slot {reading data only)
- TF card slot
- MIC slot (support wired MIC)
- AUX slot
- Earphone slot
- DC 5V charging slot
- Telescopic FM antenna
- Digital display-screen
- Number keys (select music by pressing number key)
” to pause and press again to playB: In playing music mode, long pressed “
” for fast reverse, short press to go to previous music; In headset mode, long press to volume-
” for fast forward, short press to go to next music; In headset mode, long press to volume+Operation Description
- Plug and playTum on speaker with power switch on the side of a control panel, plug the headset microphone included into MIC slot, then your voice will be amplified;
- Music play via TF card/ USB driverInsert TF card/ USB driver into the corresponding slot, the speaker will play music automatically; Press,”” ”” to previous or next song or press number keys on the top of the control panel to choose music;Noted: TF card or USB driver is NOT included;
- How to play recording1. Under any mode, press key to start recording with voice prompts “start recording”;2. Plug headset microphone into MIC slot:3. Click button to finish and save recording; At this point, the speaker will play the recording file automatically you just made;Please click button to pause or resume;Click button to play previous or next recording file;Click button again to play USB driver or TF card music;4. Click M button to quit recording and switch to other modes;Noted: require a USB driver or TF card for storage and microphone for voice input;
- Music play via AUX inputConnect the speaker to the external audio device ( with 3.5mm audio output like a computer) via audio cable included;Speaker will play music with LCD screen shows “LINE” ;
- How to connect with Bluetooth1. Click to switch to Bluetooth mode with a screen shows,and there will be voice Bluetooth is waiting for connection; prompts:Tum on Bluetooth device and search name” M700 “to pair.
- How to play TWS1. Tur on two M700 speakers, click button to enter Bluetooth mode, long press one of speaker’s M button to enter pairing status, the other one Bluetooth indication becomes solid lights means these two speakers are connected successfully.2. Turn on your phone or Bluetooth device and search name” M700 • to pair.
- How to charge speaker–When working (but not charging)–Enough Power indication: the battery sign on the screen normally on Low Power indication: the battery sign on the screen Blinks -3%–Charging speaker with plug included–In charging status: the indicator flashes while charging;Fully charged: the indicator a tum on solid lights after charged fully.Please note:1. Use the included DC 5V power adapter to charge the speaker’s internal rechargeable battery.2. Plug adapter into 110-240 AC outlet. Connect the cable end into the DC 5V power input on the speaker.3. It will normally take 3-5 hours to fully charge the battery.4. When charging is required, a voice prompt will indicate, ” Low battery, please charge “, the battery indicator will blink while charging. It will stop blinking when the battery is fully charged.5. Recharge the battery within 48 hours of the ” low battery” voice prompt. In order to extend the life of the internal battery, please charge it regularly even if the system is not being used.6. It is suggested that you charge the internal battery an additional 1-2 hours after fully charged to extend its life.7. Please DO NOT overcharge the battery by leaving the system plugged in continuously. This will reduce the life of the internal rechargeable battery and could cause overheating.
- FM Radio1) Turn on speaker and pull up ANT, short press MODE to FM mode, and the LCD show FM frequency;2) Long pressenter into automatic channels searching; after searching successfully, the amplify will save the channels automatically;3) Short press to choose the saved channels;
” to previous or next song or press number keys on the top of the control panel to choose music;Noted: TF card or USB driver is NOT included;
key to start recording with voice prompts “start recording”;2. Plug headset microphone into MIC slot:3. Click 
button to pause or resume;Click 
button to play previous or next recording file;Click
4. Click M button to quit recording and switch to other modes;Noted: require a USB driver or TF card for storage and microphone for voice input;
to switch to Bluetooth mode with a screen shows,
2. Turn on your phone or Bluetooth device and search name” M700 • to pair.
Low Power indication: the battery sign on the screen Blinks -3%–Charging speaker with plug included–In charging status: the indicator 
flashes while charging;Fully charged: the indicator a 
Please note:1. Use the included DC 5V power adapter to charge the speaker’s internal rechargeable battery.2. Plug adapter into 110-240 AC outlet. Connect the cable end into the DC 5V power input on the speaker.3. It will normally take 3-5 hours to fully charge the battery.4. When charging is required, a voice prompt will indicate, ” Low battery, please charge “, the battery indicator will blink while charging. It will stop blinking when the battery is fully charged.5. Recharge the battery within 48 hours of the ” low battery” voice prompt. In order to extend the life of the internal battery, please charge it regularly even if the system is not being used.6. It is suggested that you charge the internal battery an additional 1-2 hours after fully charged to extend its life.7. Please DO NOT overcharge the battery by leaving the system plugged in continuously. This will reduce the life of the internal rechargeable battery and could cause overheating.
enter into automatic channels searching; after searching successfully, the amplify will save the channels automatically;3) Short press 
to choose the saved channels;Specifications
| Output power | <15w | Frequency reponse | <2OOHz-18KHz |
| Speaker Impedance | 40 | Working temperature | -10’C-45C |
| Charging Voltage | DC5V== 1A | Charging time | 3H-5H |
| Music mode time | 6H.8H (medium volume) | ) Amplify time | 8H-10H |
Package included:
- 1speaker
- 1 headset microphone
- 1 waistband
- 1DC 5V adapter
- 1 charging cable
- 1 audio cable
- 1 user manual
How to wear a voice amplifier unit:
After-sale serviceWinBridge provides one year warranty and lifetime technical support.
[email protected]http://www.winbridgepower.com
report this adPlease be confident that seller support is just a mail away from you in case you find any difficulty. Kindly do not hesitate to write back to us if you need any clarification or any kind of support.
[xyz-ips snippet=”download-snippet”]