Woods WAC9G Torino Air Conditioner Instruction Manual

AIR CONDITIONEROPERATING INSTRUCTIONS FOR:AC TORINO WAC9GAC ROMA WAC7GVisit woods.se for more information and updated instruction manuals.For an extended warranty register your product at warranty-woods.com

GB Operating Instructions

Visit our website to:Get usage advice, updated brochures, troubleshoot and service information Register your product for additional services: www.warranty-woods.comCUSTOMER CARE AND SERVICEAlways use original spare parts. When contacting our Authorised Service Centre, ensure that you have the  following data available:Model number, receipt, and serial number.The refrigerant used in the portable air conditioners is the environmentally friendly hydrocarbon R290. This refrigerant is odorless and compared to the alternative refrigerant, the R290 is an ozone-free refrigerant.Warning / Caution-Safety information. General information and tips. Environmental information. Subject to change without notice.D




Operating InstructionsPRODUCT DESCRIPTION





The brand Wood’s was born with the Wood’s family over 65 years ago in the Canadian city of Guelph,  Ontario.  his is where Wood’s began developing and manufacturing dehumidifiers in 1950. Since then Wood’s has helped several hundred thousand households to prevent damages from mold damp and to breathe cleaner air. Our portable air conditioners are suitable for use in most climates, where capacity is good even at different temperatures and humidity levels. They are used with good results in premises that become hot such as living rooms, offices or bedrooms. The amount of hot air that the air conditioner removes depends on the temperature, humidity level, and placement. External weather conditions may also affect the performance of it conditioner. Wood’s air conditioners are safe in operation and intended for continuous use over many years.


Low pressure gives cold air The main element of the air conditioner is a coolant, which under low pressure is converted to gas. The process “creates cold”, which is transmitted inward, while keeping the warm air out. A liquid coolant is passed through an expansion valve and into a pipe where the pressure is low. The coolant evaporates and turns into a gas. The process absorbs heat from the surroundings and the pipe is cooled. A fan blows the cold air into the room. The gas is passed through a compressor, which increases the pressure and converts the gas into a liquid. In this process, heat is released, which is led to pipes on the opposite side and blown out by a fan. A thermostat shuts off the unit when the indoor air is cold enough.

1. SECURITY WARNINGSFlammable material. This appliance contains R290/  Propane a flammable refrigerant.Refer to this manual for safety information. Read technical manual


Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use cause injuries and damages. Always keep the instructions with the appliance for future reference.Children and vulnerable people safety

WARNINGRisk of injury or permanent disability. This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Do not let children play with the appliance. Children of less than 3 years should be kept away unless continuously supervised. Keep all packaging away from children. Cleaning and user maintenance shall not be made by children without supervision.

General SafetyThis appliance is intended to be used in households and similar applications such as Family room, living room,  staff kitchen areas in shops, offices, and other working environments. The rating plate is located at the side or ack of the Air Conditioner. Keep ventilation openings clear of obstruction.Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer. The appliance shall not be stored in a room with operating ignition sources for example open flames, an operating gas appliance, or an operating electric heater. Do not pierce or urn. Be aware that refrigerants may not contain an odor. Do not use water spray and steam to clean the appliance. Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents, or metal objects. If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre, or similarly qualified persons in order to avoid a hazard.

report this ad

SAFETY INSTRUCTIONS Installation WARNINGOnly a qualified person must install this appliance. Remove all the packaging. Do not install or use a damaged appliance. The appliance shall be installed, operated, and stored in a room with a floor area larger than 12 m².  obey, the installation instruction supplied with the appliance. Always be careful when you move the appliance because it is heavy. Always wear safety gloves. Be aware that refrigerants may not contain an odor.Make sure the air can circulate around the appliance. Wait at least 4 hours before connecting the appliance to the power supply. This is to allow the oil to flow back into the compressor. Do not install the appliance close to radiators or other heat sources. Do not install the appliance where there is direct sunlight.

Electrical connection

WARNINGRisk of fire and electrical shock. The appliance must be connected to a grounded outlet. Make sure that the electrical information on the rating plate matches with the power supply. If not, contact an electrician. Always use a correctly installed shockproof socket. Do not use multi-plug adapters and extension cables. Make sure to cause damage to the electrical components (e.g. mains plug, mains cable). Contact the Authorised Service Centre or an electrician to change the electrical components. The main cable must stay below the level of the main plug. Connect the mains plug to the mains socket only at the end of the installation. Make sure that here is access to the mains plug after the installation. Do not pull the main cable to disconnect the appliance.  always pull at the mains plug.

UseWARNINGRisk of injury, burns, electrical shock, or fire. Do not change the specification of this appliance. Be careful not to cause damage to the refrigerant circuit. It contains propane (R290), a natural gas with a high level of environmental compatibility. This gas is flammable. If damage occurs to the refrigerant circuit, make sure that there are no flames and sources of ignition in the room. Ventilate the room. Do not put flammable products or items that are wet with flammable products near or on the appliance.DisposalWARNINGRisk of injury. Disconnect the appliance from the main supply. Cut off the main cable and discard it. The refrigerant circuit of this appliance is ozone-friendly. Contact your municipal authority for information on how to discard the appliance correctly.  Do not cause damage to the part of the cooling unit that is near the heat exchanger.


[xyz-ips snippet=”download-snippet”]