Xelerate user guideWireless Sports Earphones
Getting Started
Congratulations! Thank you for choosing Kygo XelerateTM Bluetooth Earphones. Before using them, you should read this manual to familiarise yourself with the functions of the product.
Precautions
- Please follow the instructions given in this manual carefully to ensure your safety. Before using Kygo XelerateTM earphones, we would strongly encourage you to read through this user manual.
- Pay particular attention to any edges, uneven surfaces, metal parts, accessories, and packaging to avoid any possibility of injury.
- Do not dismantle, repair or modify this product as this could lead to fire, electric shocks, or other product damage, which are not covered under warranty.
- Do not use any solvents or volatile liquids to clean Kygo XelerateTM earphones.
- Do not use your Kygo XelerateTM earphones in hazardous situations.
Kygo Life As adheres to the certification requirements for various regions around the world. For a full list of certifications please visit: wwww.xbykygo.comThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna. Increase the distance between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Changes or modifications not expressly approved by Kygo Life As could void the user’s authority to operate this equipment.Kygo Life As, Gjerdrumsvei 10 A, declare under their sole responsibility that the product described in this user guide complies with technical standards EN300328, EN301489, EN55032, EN55035, EN50332.The product is only guaranteed to comply with EN50332 in generic mode with the immersion of with the volume limiter on. Depending on the hearing of the user, some combinations of hearing corrections and immersion settings may exceed EN50332 limits.To prevent possible hearing damage, do not listen to high levels for long periods.This device may be operated in all member states of the EU. Declaration for EU compliance: Operation Frequency Band/Max. RF power transmitted: 2402-2480MHz, <3.24dBm.Hereby, Kygo Life As. declares that the radio equipment type `Xelerate’ is in compliance with Directive 2014/53/ EU. The full text of the EU declaration of conformity is available at the following internet address: www.xbykygo.comFocus on your safety and that of others if you use the headphones while engaging in any activity requiring your attention. You may remove the headphones or adjust your volume to ensure you can hear surrounding sounds, including alarms and warning signals.Do not use the headphones if they emit any loud or unusual noise. If this happens, take the headphones off and contact Kygo Life As customer service.Do not submerge or expose the headphones to water, or wear them while participating in watersports, e.g., swimming, surfing, etc.This symbol means the product must not be discarded as household waste and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling help protect natural resources, human health, and the environment. For more information on the disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.The device has been evaluated and meets general RF exposure requirements.This equipment complies with FCC’s RF radiation exposure limits established for an uncontrolled environment. This device and its antenna(e) must not be co-located or linked with another antenna or transmitter. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Kygo Life As. is under license.
Features
- Bluetooth 5.0
- The headphone battery power status is displayed on iOS
- SBC and Qualcomm® aptXTM audio technology
Made and assembled in China.© 2019 Kygo Life As. No part of this work may be reproduced, modified distributed, or otherwise used without prior written permission.
General function
| Power on: | Blue LED is turned on for 1 sec. |
| Power off: | Red LED is turned on for 1 sec. |
| Pairing: | Red/LED & Blue LED flash alternately |
| Incoming call: | Red LED flashes continuously |
| Low battery: | Red LED flashes 2 times every 2 sec. |
| Charging: | Red LED stays lit |
| Charging finished: | Red LED stays lit during charging.Blue LED stays lit once charging is done. |
Power on: Press the multi-functional button for 3 seconds. When the blue LED is on, the headphones are turned on.Power off: Press the multi-functional button for 3 seconds. Adjust volume: short press volume button “+” to increase volume. Short press volume button “-” to decrease volume. When the volume reaches max or min, listen for a “beep” sound.Play/Pause: Short press multifunctional button to pause music. Press again to restart.Next: Long press the “+” button to go to the previous next track.Previous: Long press “-” button to go to the previous trackAnswer Call: Short press the multifunctional button to answer incoming calls.End call: Double press the multifunctional button to end calls.Reject call: Long press the multifunctional button to reject calls.Battery Capacity status: When connected to iOS devices, the headphone’s battery power status is displayed in the upper right corner of the device’s screen.Charging: A new set of earphones has enough power for pairing and dialing out several times. When it has a low battery, please charge via USB cable for 2 hours. During charging, a red LED flashes. Once fully charged, the blue LED remains on.
Reset mode
When the earphone is off but charging, Long Press 5s Power & VOL+, Red light off.
Waterproof
The Kygo XelerateTM is water-resistant under the classification IPX4. The earphones can tolerate splashing water from any direction, rain, and sweat. Do not submerge them in water.
Bluetooth pairing with one phone or other devices:
- Make sure the headphones are powered OFF.
- Press and hold the multifunction button for 5 sec to enter into pairing mode.
- After red & blue LEDs flash alternately, there will be a sound to alert you that they have entered into pairing mode.
- Activate the Bluetooth function on your phone or device and search for the headphones. Follow the instruction to enter “0000” as PIN if the mobile phone reminder appears.
- Headphones or devices can now be used to play your phone music or for phone calls.
Clearing pairing
When the earphone is Disconnected and powered on, Long Press 5s VOL+ & VOL-, Red and Blue light blinking at the same time for twice (showing in purple light) then earphone is off
Sound quality with Qualcomm® aptXTM and AAC®
Sound quality with AAC®Sound quality with Qualcomm® aptXTM and Qualcomm® aptXTM Low LatencyThanks to Qualcomm® aptXTM codec, the headphones can connect wirelessly to any aptX enabled device. Doing so vastly improves the quality of Bluetooth streaming and delivers CD-Quality sound.
Qualcomm aptX is a product of Qualcomm Technologies International, Ltd.
Kit content
1 x pair Kygo XelerateTM Bluetooth Earphones1 x charging USB-micro cable2 x extra sizes of patented Freebie Sport Wings2 x extra sizes of silicone ear tips1x warranty card1x warning sheet
Specifications
Bluetooth version: 5,0Water resistance: IPX 4Talk time: Approx. 10 hoursPlaying time: Up to 8 hoursWireless range: 10 mBluetooth profiles: A2DP/ AVRCP/ HSP /HFPAudio codec: AptX, SBC, MP3Impedance: 16ohmSound pressure level: 95+/-3dBFrequency response (±3dB): 20~20khzWeight: 12.9gDimensions: 86mm*160mm*28mm
Warranty
report this adEuropean warranty period 2 years
Gjerdrumsvei 10 A0484 Oslo // Norway
References
[xyz-ips snippet=”download-snippet”]