Mi Robot Builder Rover Manual

Mi Robot Builder Rover

User Manual

Read this manual carefully before use, and retain it for future reference.

This version is for private use only and should not be distributed.

Specifications

• Name: Mi Robot Builder Rover
• Model: JMJQR03IQI
• Materials: ABS, PC
• Number of pieces: 978
• Weight: 2500 g
• Dimensions: 380x320x95 mm
• Age: 10 years+
• Input voltage: 14 V
• Input: 1.0 A
• Battery: Li – polymer
• Battery capacity: 18.3 Wh
• Intelligent brick: Bluetooth
• Wireless connectivity: Bluetooth 4.0
• BLE operating frequency: 2402 MHz-2483 MHz
• Transmit power: 0 dbm
• 2.4G Radio frequency: 2402 MHz-2483 MHz
• Transmit power: 0 dbm
• Storage temperature: -10°C~45°C
• Operating temperature: 0°C~55°C

Product Overview

1. Intelligent Brick

1. Microphone
2. Indicator
3. Power Button
4. Speaker
5. Motor Ports
6. Expansion Ports
7. Pin Holes
8. Reset Hole

2. Adapter

Use only the provided power adapter.Ports A, B, C, D can be used for charging

Adapter Model: AD10002Input: 100 – 240 V ~ 50 / 60 Hz 0.5 A MAXOutput: 14V 1 A / 5V 1 A

Charging: Indicator light is red.Fully charged: Indicator light is off.The light is green when turning on the intelligent brick.

3. Motor

Assembling Mi Robot Builder Rover

1. Before you startPut small bricks in the storage box, and large bricks in the bag.

2. Build your robotFollow the building instruction or download the e-version from the Help in the Mi Robot Builder app to assemble the bricks.

3. Inspectyour robotMake sure the controller is fully charged when the robot is on its first use.Make sure the motors are tightly connected with blocks.Make sure you followed the building instruction when you were assembling your robot.

Turning on/offTurning on: press the power buttonTurning off: press and hold the power button for 3 seconds until you hear a sound prompt

Installing the app

1. Download the app

Scan the QR code below or go to App store to download and install “Mi Robot Builder”.

2. Connecting your robot

Make sure your phone’s Bluetooth is turned on. Open the Mi Robot Builder app and tap the Bluetooth icon in the upper left corner to connect your robot.

3. Firmware updates and support

Make sure your phone is connected to the internet (preferably via Wi-Fi). Open the app and connectyour robot, and then go to Settings > System updates > Firmware updates.It takes about 20 minutes to update the firmware.

Please note following:

• Make sure the motor is off during the updates. Otherwise, the parameters may be reset and which may result in malfunction.
• Make sure the controller is fully charged before the update.
• Keep your phone away from the controller during the update.
• Refer to the “Help” in the app to learn more.

Precaution

• Do not disassemble the controller and the motor.
• Do not expose the product to sunlight, fire, heat or environments where temperature is above 60°C (140°F).
• Do not short circuit the product in any way.
• Do not crush, puncture or strike the product.
• Children under 10 years old must be accompanied by adults while playing the product.
• Children under 3 years old must not use the product, as it contains small parts that can cause suffocation.
• During charging, the battery must be placed in a well-ventilated area.
• Regularly check the charger for damages in the cord, plug, enclosure, and other parts.If damage is detected, stop using the charger before it’s repaired.
• Batteries are only to be charged by adults.

Declaration of Conformity

• We Betting AIQI Technology Co., Ltd., hereby, declares that this equipment is in compliance with the applicable Directives and European Norms, and amendments.
• WEEE Disposal and Recycling Information Correct Disposal of this product. This markingindicates that this product should not be disposal with other household wastesthrough out the EU.
• To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsible to promote the sustainable reuse of materials resources.To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Acceptable flexible cords for cord connected power units

We declare that Toys is in compliance with the essential requirement and relevant provisions of Directive 2009/48/EU.

Environmentally friendly disposal

Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little  personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.

Troubleshooting

Press the Reset button if you can’t solve the issues using the solutions above.

Principal: Xiaomi Communications Co., Ltd.Manufacturer: Betting AIQI Technology Co., Ltd.(a Mi Ecosystem Company)Address: Room 1203, Block D, No. 9/11 Shangdi 3rd St., Haidian District, Being

Downloads

Mi Robot Builder Rover Manual – Mi Robot Builder Rover Manual –