Xiaomi 10000mAh Power Bank 3 Ultra Compact User Manual

Read this manual carefully before use, and retain it for future reference.10000mAh Mi Power Bank 3 Ultra Compact

User ManualThank you for choosing 10000mAh Mi Power Bank 3 Ultra Compact. This product is small and portable, supporting a maximum of 22.5 W in two-way fast charging. Equipped with high-quality lithium polymer battery cells and a charging and discharging chip, the power bank performs excellently in terms of safety, efficiency, and compatibility.

Notes:The battery level check button is not a power button.The power bank detects charging and discharging automatically.Safety: This power bank is equipped with multiple safeguarding technologies to prevent overcharging, over-discharging, overheating, and short circuits in any working condition. Fast Charging: USB-A single port supports 5 V/2.4 A, 9 V/2.5 A Max., 12 V/1.85 AMax. fast charging mode. USB-C single port supports 5 V/3 A, 9 V/2.5 A Max., 12 V/1.85 A Max. fast charging mode.Compatibility: The built-in USB charge controller is compatible with most smart devices including smartphones, and tablets.Quality: High-quality lithium polymer battery cells and a durable charging and discharging chip.

Charging

To charge the power bank, connect a Mi power charger and charging cable to its USB-C or Micro-USB port. The indicator shows the following charging status:

Battery Level LED1 LED2 LED3 LED4
0-25% Blinking Off Off Off
25-50% On Blinking Off Off
50-75% On On Blinking Off
75-99% On On On Blinking
Fully Charged On On On On
Charging Error Blinking Blinking Blinking Blinking

Discharging

To charge devices via the power bank, connect the charging cable to the device and the power bank’s USB-A or USB-C port. The indicator shows the following discharging  status:

Battery Level LED1 LED2 LED3 LED4
Undervoltage Off Off Off Off
0-25% Blinking Off Off Off
25-50% Blinking Blinking Off Off
50-75% Blinking Blinking Blinking Off
75-100% Blinking Blinking Blinking Blinking

* Low-current discharge: When the power bank is not charging, double press the battery level check button to enter the low-current discharge mode. This mode can be used to charge low-current devices such as Bluetooth headphones and smart bands. The indicator lights will turn on one by one to indicate the power bank is in low-current discharge mode. Simply press the button again to exit this mode. The power bank will automatically exit this mode after two hours.

Warnings

Improper use may result in battery failure, overheating, and even fire or explosion. To ensure your safety and minimize the risk of personal injury and property damage, please observe the following precautions:

  • This power bank is not a toy. Please keep it away from children. Do not let children use or play with this power bank in order to avoid accidents.
  • When charging this power bank, make sure you use a charger that complies with the local safety standards to prevent electric shocks or cause damage to the battery.
  • Do not expose this power bank to pressure, impact, strong vibrations, or liquids. Any of these occurrences may lead to a short circuit or cause damage to the battery or electrical circuit. If this happens, stop using the power bank immediately, and dispose of it properly.
  • When the power bank becomes swollen, deformed, starts to leak, or its capacity is significantly reduced, please stop using it immediately and dispose of it in a proper manner.
  • Do not charge or discharge this power bank in places where its heat dissipation may be affected, such as in the pocket of your pants, a closed bag, or on a bed or sofa. Ensure the power bank is not covered by clothing, pillows, bedding, or other miscellaneous items during its working. When using the power bank to charge devices including phones for an extended time, do not stack them together to ensure better heat dissipation.
  • Do not disassemble, puncture, strike, or short circuit this power bank. Never expose it to liquids, fire, and other heat sources such as stoves, heaters, or environments with ambient temperatures higher than 60°C (140°F).
  • When it is hot, do not leave this power bank in a car or places that are exposed to direct sunlight.
  • This power bank contains a lithium polymer battery. Opening the casing is strictly prohibited so as to avoid battery damage or safety hazards.

Precautions

  • Please fully charge this power bank before using it for the first time.
  • Use a qualified charger and a USB cable (Mi brand products are recommended) when charging the power bank or using it to charge other devices.
  • When charging this power bank, do not leave it unattended for a long time. Unplug it from the power supply before going out.
  • Once this power bank is fully charged or fully charges the smart devices, unplug the charging cable in a timely manner to prevent damage.
  • If the battery level indicator does not light up after pressing the button, it may be because the power bank is in protective mode. Try plugging in an external chargerwill restore the power bank.
  • When not using this power bank for a long time, store it in a cool and dry environment and keep its battery level in the range of about 25–50%. For long-termstorage, do not fully charge the power bank, or leave the battery level empty to avoid reducing its battery life.

Illustrations of the product, accessories and user interface in the user manual are for reference purposes only. The actual product and functions may vary due toproduct enhancements.

Specifications

Model: PB1022ZM Battery Type: Lithium Polymer BatteryCell Capacity: 10000 mAh, 3.7 V, 37 WhInput Port: USB-C/Micro-USB Output Port: USB-A/USB-CInput: (USB-C) 5 V=3 A, 9 V=2.5 A(Micro-USB) 5 V=2 A, 9 V=2 AOutput: 22.5 W Max. (Triple-port) 5 V=3 A(USB-A) 5 V=2.4 A, 9 V=2.5 A-Max., 12 V=1.85 A Max.(USB-C) 5 V=3 A, 9 V=2.5 A Max., 12 V=1.85 A Max.Operating Temperature: 5°C to 35°CItem Dimensions: 90 × 63.9 × 24.4 mmCharging Time: Approx. 3.5 hours (PD 24 W charger* or above, with a USB-C toUSB-C charging cable)Approx. 6 hours (5 V/2 A charger*, with the charging cable included)*Charger is not provided with power bank.

CE

The manufacturer hereby, declares that this equipment is in compliance with the applicable Directives and European Norms, and amendments. The full text of the EU declaration of conformity is available at the following internet address: http://www.mi.com/global/service/support/declaration.html

WEEE Information

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as the terms and conditions of such collection points.

Anti-counterfeit Label Instructions

Each 10000mAh Mi Power Bank 3 Ultra Compact comes with an anti-counterfeit label on the outer package. To check the authenticity of the product, scratch the anti-counterfeit coating, and then enter the security code on chaxun.mi.com.

Anti-counterfeit LabelScratched-off Coating

For further information, please go to www.mi.com

Manufactured for: Xiaomi Communications Co., Ltd.Manufactured by: Zimi Corporation(a Mi Ecosystem company)Address: A913, No. 159 Chengjiang Road, Jiangyin, Jiangsu, ChinaImporter:Beryko s.r.o.Na Roudné 1162/76, 301 00 Plzeňwww.beryko.cz

References

[xyz-ips snippet=”download-snippet”]


Posted

in

by