Mi True Wireless Earbuds Basic 2
The Mi True Wireless Earbuds Basic 2 are a budget–friendly option for those looking for a quality true wireless experience. They feature Bluetooth 5.0 for a stable connection and easy pairing, and have a built–in microphone for clear hands–free calling. The earbuds have a 4–hour battery life, and the charging case provides an additional 8 hours of battery life for a total of 12 hours of use. The earbuds are made of a lightweight material and are comfortable to wear for long periods of time.
User ManualRead this manual carefully before use, and retain it for future reference.
Product Overview
Charging Case
Earbuds
The earbuds come with the size M of ear tips installed, you can switch to size S or L if the installed size does not suit your ear.
Wearing
Gently insert the earbud into the ear canal, make sure it is not easy to sway when shaking your head.
Please pay attention to adjust the earbud to
Charging
Before using the device, please tear off the protective film from the earbuds’ contact points to fully charge them and their charging case.Connect the charging cable to charge the earbuds and the charging case simultaneously. The indicator is red while charging, and changes to white once fully charged, then goes off after 1 minute.
Turning On
Once you remove the earbud from the charging case, it automatically turns on. In case the earbuds are not in the charging case and turned off, press and hold the multi-function button for 1 second till the indicator turns white.
Turning Off
Once you place the earbud into the charging case, it automatically turns off. When the earbud is turned on, press and hold the multi-function button for 5 seconds till the indicator turns red.
Connection
Automatic Connection:
- Remove both earbuds from the charging case simultaneously, and wait for the earbuds to automatically turn on. The indicator turns white and then changes into quickly blinking white and red alternately, which means the earbuds are connecting with each other.
- When the indicator of left/right earbuds slowly blinks white, please enable the Bluetooth function on your device and search for “Mi True Wireless EBs Basic 2” to connect.
- Once your device and earbuds are successfully connected, your earbuds will automatically connect to the previously paired device (the Bluetooth is enabled) when they are turned on.
- Note: If you cannot pair the earbuds, place them back in the case and repeat the previous steps.
Reset Earbuds
If the earbuds cannot connect properly, please carry out the following steps to reset:
- Remove the earbuds from the charging case, and make sure they are turned off. =
- Press and hold the multi-function buttons on both earbuds for about 15 seconds until the indicator alternately blinks red and white three times, then release the buttons and place the earbuds back in the charging case.
Once the earbuds are reset successfully, the connection between your device and the earbuds are cleared, you should pair them with your device again.
Function OverviewThe following functions can be used on both earbuds:Answer/End callsGently press the multi-function button to answer/ end calls.Reject a call
Press and hold the button for 1 second to reject a call.
Play/Pause MusicPress the multi-function button to play/pause the music while using the earbuds.
Turn On Voice AssistantDouble press the multi-function button to enable the voice assistant while using the earbuds. Note: The function of voice assistant and quick wake-up must be supported and enabled on your device.
Answer a Second Call/Switch between CallsPress the multi-function button to answer the second incoming call during an ongoing call. Double press the multi-function button to switch between the two calls.
Switch between Earbuds and DeviceDuring a call, press and hold the multi-function button for 1 second to switch between the earbuds and your phone.
Mute/UnmuteDouble press the multi-function button to mute/ unmute the earbuds during an ongoing call.
Precautions
Warning1. Do not disassemble, repair or modify the product for any reason, as this may cause fire or even completely destroy the product.2. Do not expose the product to environments where the temperature is too low or too high (below 0°C or above 45°C).3. Keep the indicators away from the eyes of children and animals while using the earbuds.4. Do not use this product during thunderstorms. Thunderstorms may cause the product to malfunction and increase the risk of electric shocks.5. Do not wipe and clean the earbuds or their case with alcohol or other volatile liquids.6. Avoid any contact with liquids.7. Excessive sound pressure from the earbuds can cause hearing loss.Illustrations of product, accessories and user interface in the user manual are for reference purposes only. The actual product and functions may vary due to product enhancements.
Note1. If the product has not been used for more than 2 weeks, it is recommended to charge the product before use.2. Only use certified chargers supplied by qualified manufacturers.3. Continuous use of the earbuds for a long time is detrimental to one’s hearing. Do not use the earbuds at a high volume for an extended period.4. Using earbuds can reduce the perception of external sounds. Do not use earbuds in environments that may threaten safety. It is recommended to only use a single earbud when outdoors.Due to the connection characteristics of the Bluetooth signal, in dense environments with 2.4 GHz electromagnetic signal interferences, there may be occasional disconnects or no sound.
Specifications
Name: Mi True Wireless Earbuds Basic 2Model: TWSEJ061LSBluetooth Operating Frequency: 2402-2480 MHz (For EU)Max RF Output Power: < 20 mWEarbudsDimensions: 26.65 × 16.4 × 21.6 mmNet Weight: Approx. 4.1 g (per earbud)Wireless Range: 10 m (in an obstacle-free environment)Battery Capacity: 43 mAh (per earbud)Charging Time: Approx. 1.5 hMusic Playback Time: Approx. 4 h (earbuds only); approx. 12 h (charging case)Standby Time: Approx. 150 hInput: 5 V100 mABattery Type: Lithium-ion BatteryWireless Connectivity: Bluetooth 5.0Bluetooth Profiles: HFP/A2DP/HSP/AVRCPCharging CaseDimensions: 62 x 40 x 27.2 mmInput: 5
EU DECLARATION OF CONFORMITY
Hereby, Qianxing Inc., declares that the radio equipment type TWSEJ061LS is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.mi.com/global/service/support/declaration.html
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
To indicate on the rating plate that the equipment is suitable for direct current only; to identify relevant terminals.
WEEE Information
For further information, please go to www.mi.com Manufactured for: Xiaomi Communications Co., Ltd. Manufactured by: Chongqing Qianxing
Technology Co., Ltd.(a Mi Ecosystem company)Address: No. 60 Industrial Main Avenue, Pulv Sub-district, Tongliang District, Chongqing Municipality, China.
Importer:Beryko s.r.o.Na Roudné 1162/76, 301 00 Plzeňwww.beryko.cz
References
Stream TV | Purifier | Earbuds | Power Bank – Xiaomi United States
Beryko.cz
Stream TV | Purifier | Earbuds | Power Bank – Xiaomi United States
Mi Global Home
Stream TV | Purifier | Earbuds | Power Bank – Xiaomi United States
服務條款及細則 – 台灣官網
Stream TV | Purifier | Earbuds | Power Bank – Xiaomi United States
服務條款及細則 – 香港官網
[xyz-ips snippet=”download-snippet”]