Mi True Wireless Earbuds BasicUser Manual
Product Overview
Charging Case
Earbuds
The earbuds come with the size M of ear tips installed, you can switch to size S or Lif the installed size does not suit your ear.
Wearing
Gently insert the earbud into the ear canal, make sure it is not easy to sway when shaking your head.
Please pay attention to adjust the ea thud to expose the microphone during calls.During calls. point the earbud’s microphone toward your mouth to make the call dearer.
Charging
Before using the device, please tear off the protective film from the earbuds’ contact points to fully charge them and their charging case.
Connect the charging cable to charge the earbuds and the charging case simultaneously. When the charging case is n of fully changed, its in-indicator is red. When fully charged its indicator is off. The indicator is red while ch a raging, and changes to white once fully charged, then goes off after 1 minute.
Turning On
Once you remove the earbud from the charging case, it automatically tums on. In case of the earbuds are not in that ging case and turned off, press and hold the multi-function button for 1 second till the indicator turns white.
Turning Off
Once you place the ear bud into the charging case, it automatically turns off. When the earbud is turned on, press and hold the multi-function button for 5 seconds till the indicator turns red.
Dual Earbud Usage
Automatic Connection: Remove both earbuds from the charging case simultaneously, and wait 2- 3 seconds for the earbuds to automatically turn on.When the indicator of the right earbud slowly blinks white, you can search for *Mi True Wireless EBs Basic R’ in the Bluetooth settings of your device. If you cannot pair the earbuds, place them back in the case and repeat the previous steps. After successfully pairing for the first time, the earbud will automatically connect to the previously paired device (the Bluetooth is enabled) when it is turned on.Note: A-II earbuds have been preset at the factory, and can be paired with a device directly.
indicator of the right earbud will slowly blink white after the connection between the earbuds has been en est abolished. E nable the Bluetooth of your device, then connect or pair your device with earbuds.
Single Earbud Usage
Automatic Connection: Remove one earbud from the charging case, and wait for the earbud to automatically tum on. The indicator of the earbud quickly blinks white, then turns into slowly blinks white. Enable the Blu tooth of your devices and search from True Wireless EBs Basic _R or Mi True Wireless EBs Basic _L then pair your device with the right earbud or left earbud correspondingly. After successfully pairing for the first time, the earbud will automatically connect to the previously paired device (the Bluet ooth is enabled d) when it is turned on.Note: The left earbud (L) has a relatively long automatic connection time.Manual Connection: When the earbuds are turned off, manually turn on one of the earbuds. When the indicator slowly blinks white, enable Bluetooth of your device and pair the earbud with your device.
Reset Earbuds
If the earbuds cannot connect properly, please try out the following steps to reset: Remove the earbuds from the charging case, and make sure they are turned off. Press and hold the multi-function button on both earbuds for about 15 seconds. After the indicator alternately blinks red and white three times twice, then release the button and place the earbuds back in the charging case. Delete the earbuds from the list of paired devices on your device, and then pair them with your device again.
Function Overview
The following functions can be used on both earbuds:Answer/End callsGently press the multi-function button to answer/ end calls.
Reject a callPress and hold the button for 1 second to reject a call.
Flay/Pause MusicWhile standby, gently presses the multi-function button to play/pause music.Note: A music player needs to be running in the background.Turn On Voice AssistantWhile standby, press the multi-function button twice to turn on the voice assistant.Note: The function of voice assistant and quick wake-up must be supported and enabled on your device.
Answer a Second Call/Switch between Call is Upon incoming calls, gently press the multi-function button to answer the call. During a call, gently press the multi-function button to answer the second incoming call. Ge gently presses the multi-function button twice to switch between the two calls.Switch between Earbuds and DeviceDuring a call, press and hold the multi-function button for 1 second to switch between the earbuds and your phone.Mute/UnmuteDuring calls, gently press the multi-function button twice to mute/unmute.
Features
 |
Bluetooth 5.0 |
 |
2-in-1 storage and charging function |
 |
Independent wireless design |
Illustr actions of product, accessories, and user interface e in the user manual are for reference purposes only. The actual product and functions may vary due to product enhancements.
Precautions
Warning
- Do not issue nide, repair, or modify the product for any reason, as this may cause fire or even completely destroy the product.
- Do not expose the product to environments where the temperature is too low or too high (below 0″C or above 45–C).
- Keep the product indicator away from the eyes of children and animals while in use.
- Do not use this product during thunders tom. Thunderstorms may cause the product to malfunction and increase the risk of electric
- Do not clean this product with alcohol or other volatile liquids.
- Avoid any contact with liquids.
- Excessive sound pressure from
Note
- If the product has not been used for more than 2 weeks, it is recommended to charge the product before use.
- Only use certified chargers supplied by qualified
- Continuous use of earbuds for a long time is detrimental to one’s hearing. Do not use the earbuds at a high volume for any extended
- Using earbuds n reduces the perception of external sounds. Do not use earbuds in environments that may threaten safety. It is recommended to only use a single earbud when
Specifications
Name: Mi True Wireless Earbuds Basic Model: TWSEJ04LSOperating FP: +8.85 dBmMax. Output Power 2402-2480 MHZEarbudsDimensions: 26.65 x 16.4 x 21.6 mm Net Weight: Approx. 4.1 g (per earbud)Wireless R3rge: 10m (roan obstacle-free environment) Battery Capacity: 43 mAh (per earbud) Charging lime: Approx. 1.5 hTalk Time: Approx. 4 hStandby Time: Approx. 150 hInput: 5 V 00 mABattery Type: Lithium Polymer Wireless Connectivity Bluetooth 5.0Bluetooth Profiles: HFP/A2DP/HSP/AVRCPCharging CaseDimensions: 62 x 40 x 271 mmInput 5 V =500 mAOutput: 5 V t50 mACharging time: Approx. 2 hStandby time: Approx. 4 monthsBattery Capacity 300 mAhBattery Type: Lithium Polymer
EU Declaration of Conformity Hereby, Liesheng Inc., declares that the radio equipment type TWSE.I04LS is in compliance with Directive 2014/53/EU. The full text of the E U declaration of conformity is available at the following internet address: http://www.mi.com/global/service/support/declaration.htmlCAUTIONRISK OF EXPL OS ION IF BATTERY IS REPLA CE D BY AN INCORRECT TYPE.DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
To prevent possible hearing damage, do not listen to high volume levels for long periods.
WEEE
All products bearing this symbol are e-waste electrical and electronic equipment (WEE E as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your wart e equipment to a designated collection point for the recycling of waste elect Rica I and electronic equipment, appointed by the government or local authorities. correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as the terms and conditions of such collection points.
For further information, please go to For further information, pleas e go to www.mi.comManufactured or: Xiaomi Communication s Co., Ltd.Manufactured by: Dongguan Yingsheng Electronic Technology Co., Ltd. (a Mi Ecosystem company)Address: Suite 1 304, 13/F, Project Phrase 2 of Gaos heng Tech Tower, Gao’s heng Tech Park, No.5 Longxi Road, Zhouxi Community, Nanchen g District, Dongguan, Guangdong, China.
Read this manual carefully before use, and retain it for future reference.
References
[xyz-ips snippet=”download-snippet”]