xtorm XP300 Portable Power Station User Manual

ManualXP300#MOREENERGY

1

74.000mAh 1.1-1C0 / 281Wh
240x142x154mm
3.3kg
DC 6.5mm Input port 72W (26V max)
USB-C PD input 60W
Output AC 300W (220V/ 50HZ)
Output 2x DC 5.5mm port 60W ( 12V/5A)
Output Car charger 120W 12V/I0A)
Output USB lx U581-C PC) 60W (5V/3A. 9V2.22A. 12V/1.5A) lx US -A QC 3.0 18W 15V.3A. 9V/2A. 12V/1.5A) 2x U58-A 15V/3.1A)
Max output: 300W
Power cord. MC4 to DC 6.5mm cruller cable. manual

A. DC 6.5mm input port: 72W (26V max)B. Output 2x DC 5.5mm part: 60W (12V/SA)Output Car charger: 12CW (12V/10A)C.  2x USB-A (5V/3.1A)D.  1x USB-A QC 3.0 18W (5V.3A,9V/2A,12V/1.5)E. 1x in/Output USB-C PD 60W(5V/3A, 9V/22A, 12V/1.5A)F. Output AC 300W  (220V/50Hz)

2

HOW TO USE THIS POWER STATIONPress the button on the output you want to useFOR USB/DC OUTPUT: Press 1 secondFOR AC OUTPUT: Press 2 secondsThe output is working when the green light turns on. You can now use this outputTIP: when not using an output, turn it off to save energy.

3

4

CHARGING FROM WALL CHARGER:Use the included AC charging adapter W connect to the 6.5mm DC input port. ‘max 72W) You can also connect a use a Use-C PO charger to the U58-C port. (max 60W)CHARGING FROM A SOLAR PANEL:Connect your Solar Panel directly to the 6.5mm DC Input port. If your solar panel has an MC4 connector, please use the adapter cable that is included.

IMPORTANT NOTE:When using a Solar Panel to recharge the Power Station, make sure the power does not exceed 26V. If more power is used it can cause serious damage to the unit.

7

RECHARGING THE POWER STATIONThe Power Station is fully charged when the LCD display shows 100%

8

9

XTREME SERIES – Maximum portable power

  1. Specifications
  2. 1. Press the button on the output you want to use For USB/DC output: Press 1 second For AC output: Press 2 seconds2. The output is working when the green light turns on3. You can now use this outputTip: when not using an output, turn it off to save energy
  3. Charge your device
  4. Recharging the power bank
  5. CHARGING FROM WALL CHARGER: Use the included AC charging adapter to connect to the 6.5 m DC input port. (max 72W). You can also connect a use a USB-C PD charger to the USB-C port. (max 60W)
  6. CHARGING FROM A SOLAR PANEL: Connect your Solar Panel directly to the 6.5mm DC input port. If y ur solar panel has an MC4 connector, please use the adapter cable that is incl dead.
  7. Recharge the power bank via the DC in just 5.5 hours.
  8. Power indicator
  9. Included in the box

 Warnings Don’t drop, disassemble or attempt to repair the charger by yourself. Avoid exposure to water or high humidity. Don’t expose to any heat source. Keep out of reach of children Don’t use in the presence of flammable gas. Telco Accessories has tested the product in a test environment. All statements/declarations made by Telco Accessories about the (operation) of the product are based on the results obtained from such tests. These results/statements/declarations cannot be guaranteed, for example in cases of deviating or injudicious use and/or use in a different environment.

EU DECLARATION OF CONFORMITY(In accordance with E 150/IEC 17050-1)

Declaration number: DOCIP 1185301Name and address of manufacturer / EU-AR: Telco Accessories BV Hoofdveste 193992 OH Houten NetherlandsTHIS DECLARATION OF CONFORMITY IS ISSUED UNDER THE OLE RESPONSIBILITY OF:Name and address of manufacturer: Telco Accessories BV Hoofdveste 19 399217H Houten NetherlandsProduct identification: Xtorm Portable Power Station 3010 XP300THE PRODUCTS MENTIONED IN THIS DECLARATION ARE IN UONFORMITY WITH:EU Community LegislationRestriction of Hazardous Substaes (RoHS) Directive 2011/65/EU ElectroMagnetic Compatibility D ective (EMCD) 2014/30/EU Low Voltage Directive (LVD) 201 /35/EUHarmonized standardsSafety of electrical equipment EN 62368-1:2014 + AC:2015-02 +C:2015.05 + AC:2015-11 + AC:2017.03 + A11:2017 + EN IEC 62368-1:2020 + A11:2020 +AC:2 20-05Exposure of humans to electron emetic fields (EMF)62233:2008 + AC:2008Electromagnetic Compatibility (EMC)61000-3-2:2014 + IEC 61000-3-2:201961000-3-3:2013 + A1:2019HC 61000-6-2:2019 +61000-6-2:2005 + AC:200561000-6-3:2007 + A1:2011 + A1:2011/AC:2012Restricted substances in electric50581:2012 EN IEC 63000:2018SIGNED FOR AND ON BEHALF OF:Name, function:Ralph Both, CEOCompany name:  Telco Accessories BV

[xyz-ips snippet=”download-snippet”]


Posted

in

by