XTRARM FS2010 TV Stand Installation Guide

INSTALLATION MANUALTV stand

100×100/100×200200×200/200×300300×200/300×300300×400/400×200400×300/400×400

	1
2	3
4a	4b
4b	5
6	7a
7a	7a

Read the entire instruction manual before you start installation and assembly.If you have any questions regarding any of the instructions or warnings, please contact your r local distributor for assistance.

CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury. %

• Mounts must be attached as specified in assembly instructions. Improper installation may result in damage or serious personal injury.
• Safety gear and proper tools must be used. This product should only be installed by professionals.
• Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
• Use the mounting screws provided and DO NOT OVERTIGHTEN mounting screws.
• This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
• This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.

IMPORTANT:Ensure that you have received all parts according to the component checklist prior to installation.If any parts are missing or faulty, telephone your local distributor for a replacement.MAINTENANCE:Check that the bracket is secure and safe to use at regular intervals (at least every three months).