YAMAHA UB-DXRDHR10 U-Bracket Owner’s Manual

Table of Contents

YAMAHA UB-DXRDHR10 U-Bracket Owner's Manual

Introduction

Thank you for purchasing the Yamaha UB-DXRDHR10 U-BRACKET. This product is a bracket designed for use in installation of the Yamaha DXR10, DHR10 and CHR10 speakers. This manual explains how to attach the bracket to a speaker when installation personnel use this bracket to install the speaker to a wall or ceiling. Please read this manual thoroughly before you begin using this product in order to use it properly. After reading this manual, please keep it available for future reference.

The example illustrations used in this manual are taken from the DXR10, if not otherwise specified.

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDINGPlease keep this manual in a safe place for future reference.

WARNINGAlways follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

Setting

When mounting on a wall, do not use the bracket vertically or at an angle to the ground. Otherwise, the speaker weight may cause the bracket to bend.
Do not attach this product to any speaker not specified as compatible. Doing so may result in damage or injury.Do not modify
Do not attempt to modify the product. Doing so can result in damage or injury.

CAUTIONAlways follow the basic precautions listed below to avoid the possibility of physical injury to you or others. These precautions include, but are not limited to, the following:Setting

Keep this product out of reach of children. This product is not suitable for use in locations where children are likely to be present.
Always consult qualified Yamaha service personnel if the product installation requires construction work, and make sure to observe the following precautions.– Choose mounting hardware and an installation location that can support the weight of the product.– Avoid locations that are exposed to constant vibration.– Use the required tools to install the product.– Use bolts and nuts as well as washers for installation and tighten them firmly so that the speaker is secure and does not move.– Always loosen the corresponding screw before adjusting the angle or direction of the speaker. Never force this adjustment with the screw still tightened.– Inspect the product periodically. Improper installation might cause accidents, injuries, damage or malfunction of this product.

■ About this manual

The illustrations as shown in this manual are for instructional purposes only.
The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.

■ About disposal

This product contains recyclable components. When disposing of this product, please contact the appropriate local authorities.

Package Contents

■ Parts bag contents

Check Before Installation

Fittings, bolts, and other items for installing the bracket to a wall or ceiling are not included. If you are not sure what fittings to use, consult a specialist.

CAUTION

Make sure that the installation surface is strong enough to support the total weight of the speaker and the U-bracket. If you are not sure about the installation surface, consult a specialist. Avoid attaching the U-bracket to drywall such as acoustic tiles.
Make sure to take precautionary measures using wires to prevent the speaker from falling down in the event of an installation failure. Attach commercially-available M8 eye bolts to the screw holes for the U-bracket, and attach M8 for DXR10 or M10 for DHR10/CHR10 to the screw holes (rigging points) located at the top (two locations) and on the lower rear (one location) of those units. For the DHR10 and CHR10, use eye bolts 3050 mm in length.
When installing the safety wire to the wall, install it higher than the wire’s attachment point on the speaker, with as little slack as possible. If the wire is too long, and the speaker happens to fall, the wire may snap as a result of too much strain.

Yamaha cannot be held responsible for damage or injury caused by insufficient strength of the support structure or improper installation.

Installation Instructions

CAUTIONMake sure that you do not pinch your fingers between the U-bracket and speaker.

NOTE(DHR10, CHR10 only) Carefully store the screws removed from the speaker so that they are not lost. Using the speaker with the screws removed will negatively affect sound quality due to air leakage because the screw holes penetrate the inside of the speaker cabinet. Re-install the screws to the original screw holes after removing the U-bracket.

Vertical installation

1. Assemble two L-shaped brackets into a U-shape using the included M5 × 10 screws as shown in the figure below. Peel off the sheet from each rubber spacer, and then attach the spacers to the inside of each bracket arm by aligning the holes so that the hexagon bolts can be inserted.2. Make sure that the width of the U-bracket matches the speaker width.3. Affix the U-bracket on the wall or ceiling using appropriate metal brackets and bolts. These metal brackets or bolts are not included in the package. If you are not sure what to use to affix the U-bracket, consult a specialist.4. Use the included hexagon bolts (M8×25 for DXR10, M8×55 for DHR10 and CHR10), M8 spring washers, and M8 flat washers to attach the speaker to the U-bracket. The mounting position of the speaker is sealed before shipment, so remove the seal for DXR10, and remove the M8 screws (2 total) for DHR10 and CHR10 with a 5 mm hexagon wrench in advance.

5. Adjust the speaker angle, then tighten the bolts until the speaker is securely affixed. The recommended torque is 12.4 Nm.

Horizontal Installation

1. Attach the bottom plate to the bottom of the speaker using the included M5 × 16 screws for the DXR10, and use the M8 × 35 hexagon bolts for the DHR10 and CHR10, as shown in the figure below. The recommended torque is 3 Nm for DXR10, and 12.4 Nm for DHR10 and CHR10.DHR10, CHR10The mounting position of the plate is sealed with screws, so remove them (two total) with a 5 mm hexagon wrench in advance.

2. Assemble two L-shaped brackets into a U-shape using the included M5 × 10 screws as shown in the figure below. Peel off the sheet from each rubber spacer, and then attach the spacers to the inside of each bracket arm by aligning the holes so that the hexagon bolts can be inserted.

3. Make sure that the width of the U-bracket matches the speaker width.4. Affix the U-bracket on the wall or ceiling using appropriate metal brackets and bolts. There will be a slight gap between the U-bracket and the wall surface. Insert spacers into the gap and affix them with bolts. These metal brackets or bolts are not included in the package. If you are not sure what to use to affix the U-bracket, consult a specialist.

5. For the DXR10, use the included hexagon bolts, M8 spring washers, and M8 flat washers to attach the speaker to the U-bracket. For the DHR10 and CHR10, use the included M8 × 35 hexagon bolts with spring washer and flat washer to attach the speaker to the Unbracket. Use the bolt hole in the center of the handle on the top of the speaker.

6. Adjust the speaker angle, then tighten the bolts until the speaker is securely affixed. The recommended torque is 12.4 Nm.

Specifications

Material SteelNet Weight 4.2 kg

* The contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest manual, access the Yamaha website then download the manual file.

Optional Brackets (sold separately)

These illustrations are of the DHR10.

Dimensions

■ DXR10

■ DHR10, CHR10

ADDRESS LIST

NORTH AMERICACANADAYamaha Canada Music Ltd.135 Milner Avenue, Toronto, Ontario,M1S 3R1, CanadaTel: +1-416-298-1311U.S.A.Yamaha Corporation of America6600 Orangethorpe Avenue, Buena Park, CA90620, U.S.A.Tel: +1-714-522-9011

CENTRAL & SOUTH AMERICAMEXICOYamaha de México, S.A. de C.V.Av. Insurgentes Sur 1647 Piso 9, Col. San JoséInsurgentes, Delegación Benito Juárez, México,D.F., C.P. 03900, MéxicoTel: +52-55-5804-0600

BRAZILYamaha Musical do Brasil Ltda.Praça Professor José Lannes, 40, Cjs 21 e 22,Brooklin Paulista Novo CEP 04571-100 – São Paulo– SP, BrazilTel: +55-11-3704-1377

ARGENTINAYamaha Music Latin America, S.A.,Sucursal ArgentinaOlga Cossettini 1553, Piso 4 Norte,Madero Este-C1107CEK,Buenos Aires, ArgentinaTel: +54-11-4119-7000

PANAMA AND OTHER LATINAMERICAN/CARIBBEAN REGIONSYamaha Music Latin America, S.A.Edif. Torre Banco General, Piso 7, UrbanizaciónMarbella, Calle 47 y Aquilino de la Guardia,Ciudad de Panamá, República de PanamáTel: +507-269-5311

EUROPETHE UNITED KINGDOM/IRELANDYamaha Music Europe GmbH (UK)Sherbourne Drive, Tilbrook, Milton Keynes,MK7 8BL, U.K.Tel: +44-1908-366700

GERMANYYamaha Music Europe GmbHSiemensstrasse 22-34, 25462 Rellingen, GermanyTel: +49-4101-303-0

SWITZERLAND/LIECHTENSTEINYamaha Music Europe GmbH, BranchSwitzerland in ThalwilSeestrasse 18a, 8800 Thalwil, SwitzerlandTel: +41-44-3878080

AUSTRIA/BULGARIA/CZECH REPUBLIC/HUNGARY/ROMANIA/SLOVAKIA/SLOVENIAYamaha Music Europe GmbHBranch AustriaSchleiergasse 20, 1100 Wien, AustriaTel: +43-1-60203900

POLANDYamaha Music Europe GmbHSp.z o.o. Oddział w Polsceul. Wielicka 52, 02-657 Warszawa, PolandTel: +48-22-880-08-88

MALTAOlimpus Music Ltd.Valletta Road, Mosta MST9010, MaltaTel: +356-2133-2093

NETHERLANDS/BELGIUM/LUXEMBOURGYamaha Music Europe Branch BeneluxClarissenhof 5b, 4133 AB Vianen, TheNetherlandsTel: +31-347-358040

FRANCEYamaha Music Europe7 rue Ambroise Croizat, Zone d’activités dePariest,77183 Croissy-Beaubourg, FranceTel: +33-1-6461-4000

ITALYYamaha Music Europe GmbH, Branch ItalyVia Tinelli N.67/69 20855 Gerno di Lesmo (MB),ItalyTel: +39-039-9065-1

SPAIN/PORTUGALYamaha Music Europe GmbH Ibérica, Sucursalen EspañaCtra. de la Coruña km. 17,200, 28231Las Rozas de Madrid, SpainTel: +34-91-639-88-88

GREECEPhilippos Nakas S.A. The Music House19th klm. Leof. Lavriou 190 02 Peania – Attiki,GreeceTel: +30-210-6686168

SWEDEN/FINLAND/ICELANDYamaha Music Europe GmbH Germany filialScandinaviaJA Wettergrensgata 1, 400 43 Göteborg, SwedenTel: +46-31-89-34-00

DENMARKYamaha Music Denmark,Fillial of Yamaha Music Europe GmbH,TysklandGeneratorvej 8C, ST. TH. , 2860 Søborg, DenmarkTel: +45-44-92-49-00

NORWAYYamaha Music Europe GmbH Germany –Norwegian BranchGrini Næringspark 1, 1332 Østerås, NorwayTel: +47-6716-7800

CYPRUSYamaha Music Europe GmbHSiemensstrasse 22-34, 25462 Rellingen, GermanyTel: +49-4101-303-0

RUSSIAYamaha Music (Russia) LLC.Room 37, entrance 7, bld. 7, Kievskaya street,Moscow, 121059, RussiaTel: +7-495-626-5005

OTHER EUROPEAN REGIONSYamaha Music Europe GmbHSiemensstrasse 22-34, 25462 Rellingen, GermanyTel: +49-4101-3030

AFRICA

Yamaha Music Gulf FZEJAFZA-16, Office 512, P.O.Box 17328,Jebel Ali FZE, Dubai, UAETel: +971-4-801-1500

MIDDLE EAST

TURKEYYamaha Music Europe GmbHMerkezi Almanya Türkiye İstanbul ŞubesiMor Sumbul Sokak Varyap Meridian Business1.Blok No:1 113-114-115Bati Atasehir Istanbul, TurkeyTel: +90-216-275-7960

OTHER REGIONSYamaha Music Gulf FZEJAFZA-16, Office 512, P.O.Box 17328,Jebel Ali FZE, Dubai, UAETel: +971-4-801-1500

ASIA

THE PEOPLE’S REPUBLIC OF CHINAYamaha Music & Electronics (China) Co.,Ltd.2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu,Shanghai, ChinaTel: +86-400-051-7700

INDIAYamaha Music India Private LimitedP-401, JMD Megapolis, Sector-48, Sohna Road,Gurugram-122018, Haryana, IndiaTel: +91-124-485-3300

INDONESIAPT Yamaha Musik Indonesia DistributorYamaha Music Center Bldg. Jalan Jend. GatotSubroto Kav. 4, Jakarta 12930, IndonesiaTel: +62-21-520-2577

KOREAYamaha Music Korea Ltd.11F, Prudential Tower, 298, Gangnam-daero,Gangnam-gu, Seoul, 06253, KoreaTel: +82-2-3467-3300

MALAYSIAYamaha Music (Malaysia) Sdn. Bhd.No.8, Jalan Perbandaran, Kelana Jaya, 47301Petaling Jaya, Selangor, MalaysiaTel: +60-3-78030900

SINGAPOREYamaha Music (Asia) Private LimitedBlock 202 Hougang Street 21, #02-00,Singapore 530202, SingaporeTel: +65-6740-9200

TAIWANYamaha Music & Electronics Taiwan Co.,Ltd.2F., No.1, Yuandong Rd., Banqiao Dist.,New Taipei City 22063, Taiwan (R.O.C.)Tel: +886-2-7741-8888

THAILANDSiam Music Yamaha Co., Ltd.3, 4, 15, 16th Fl., Siam Motors Building,891/1 Rama 1 Road, Wangmai,Pathumwan, Bangkok 10330, ThailandTel: +66-2215-2622

VIETNAMYamaha Music Vietnam Company Limited15th Floor, Nam A Bank Tower, 201-203 CachMang Thang Tam St., Ward 4, Dist.3,Ho Chi Minh City, VietnamTel: +84-8-3818-1122

OTHER ASIAN REGIONShttp://asia.yamaha.com/

OCEANIA

AUSTRALIAYamaha Music Australia Pty. Ltd.Level 1, 80 Market Street, South Melbourne,VIC 3205, AustraliaTel: +61-3-9693-5111

REGIONS AND TRUST TERRITORIES IN PACIFIC OCEANhttp://asia.yamaha.com/

PA55

Head Office/Manufacturer: Yamaha Corporation 10-1, Nakazawa-cho, Naka-ku, Hamamatsu, 430-8650, Japan (For European Countries) Importer: Yamaha Music Europe GmbH Siemensstrasse 22-34, 25462 Rellingen, Germany

[xyz-ips snippet=”download-snippet”]

Posted

2023-01-21

Yamaha

admin

Tags:

U-BRACKET, UB-DXRDHR10, Yamaha