The expert for robots in your home
With one click to the online shop
myRobotcenter.eu
LM C32A
40V CORDLESS LAWNMOWEROriginal Instructions
READ & UNDERSTANDINSTRUCTION MANUALSave all warnings and instructions for future reference.
INTENDED USE
This lawnmower has been designed for cutting grass. The machine is to be used only for its prescribed purpose, any other use is deemed to be a case of misuse. Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
GENERAL SAFETY WARNINGS
WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious personal injury. Carefully read the instructions for the safe operation of this machine. Save all warnings and instructions for future reference.
- This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
- Children should be supervised to ensure that they do not play with the product.
IMPORTANTREAD CAREFULLY BEFORE USEKEEP FOR FUTURE REFERENCE
GENERAL SAFETY WARNINGS
Training1. Read the instructions carefully and make sure you fully understand them. Make sure you are familiar with the controls and the correct use of the product.2. Never allow small children or people unfamiliar with these instructions to use the product. Local regulations can restrict the age of the operator.3. Never operate the product while people, especially children or pets are nearby.4. Keep in mind that the operator or user is responsible for any accidents or hazards occurring to other people or their property.
Preparation1. While operating the product always wear substantial footwear and long trousers. Do not operate this product when barefoot or wearing open sandals. Avoid wearing clothing that is loose-fitting or has hanging cords or ties.2. Thoroughly inspect the area where the product is to be used and remove all objects which could be thrown by the product.3. Before use, always visually inspect to see that the blade, blade bolt, and the blade assembly are not worn or damaged. Replace worn or damaged components in sets to preserve balance. Replace any damaged or unreadable labels.4. Ensure the switch is in the off position before inserting the battery pack. Inserting the battery pack into a machine that is switched on can result in injury.
PRODUCT SAFETY WARNINGS
General Operation1. Use the tool only with specifically designated battery packs. Use of any other battery packs will increase the risk of injury and fire.2. Only operate the product in daylight or in good artificial light.3. Do not expose the tool and charger to rain or wet conditions. If a tool or charger is exposed to moisture it will increase the risk of electric shock.4. Avoid operating the product on wet grass.5. Always be sure of your footing on slopes.6. Walk, never run.7. Mow across the face of slopes, never up and down.8. Exercise extreme caution when changing direction on slopes.9. Do not mow excessively steep slopes.10. Use extreme caution when reversing or pulling the product towards you.11. Stop the blades if the product has to be tilted for transportation, when crossing surfaces other than grass and when transporting the product to and from the area to be mowed.12. Never operate the product with defective guards or shields or without safety devices in place such as deflectors or grass collectors.13. When switching on the motor keep feet well away from blades.14. Do not tilt the product when switching on the motor, except if the product has to be tilted for starting. In this case, do not tilt it more than absolutely necessary and lift only the part furthest away from the operator.15. Do not start the product when standing in front of the discharge opening.16. Do not put hands or feet near or under rotating parts.17. Keep clear of the discharge opening at all times.18. Do not transport the product while the cutting blade is running.19. Stop the product and remove the key/battery pack from the machine and make sure that all moving parts have come to a complete stop:• Whenever you leave the product unattended.• Before clearing blockages or unclogging chute.• Before checking, cleaning or working on the product.• After striking a foreign object. Make sure to inspect the product for damage and make repairs before restarting and operating the product.20. If the product starts to vibrate abnormally:• Inspect for any damages.• Replace or repair any damaged parts.• Check for and tighten any loose parts.
Charger1. Recharge only with the charger specified by the manufacturer. Do not use the original charger on other Li-ion batteries or on any other type of battery as this can increase the risk of fire or explosion.2. Check the battery charger, cable, and plug before each use. Do not use the battery charger if damaged. Do not open the battery charger yourself; the charger must be repaired by qualified personnel using original spare parts.3. The charger is designed to use a standard household 220-240 V~ 50Hz power source, ensure that the plug matches the outlet.4. Never modify the plug in any way, this will reduce the risk of electric shock.5. Do not abuse the cord of the charger. Never use the cord for carrying, pulling, or unplugging the charger. Keep cord away from heat, oil, sharp edges, or moving parts. Damaged or entangled cords increase the risk of electric shock.6. Make sure the charger cord is situated so that it will not be stepped on, tripped over, or get damaged.7. Keep the battery charger clean. Contamination can increase the risk of electric shock.8. Protect the battery charger from rain and moisture. If water accesses the battery charger there is an increased risk of electric shock.9. Battery will heat up whilst charging. To reduce the risk of fire, do not operate a battery charger on flammable surfaces such as paper or textiles.10. The temperature range over which the battery pack can be charged is typically between 5ºC45 ºC. Attempts to charge out with the prescribed temperature range may automatically be blocked by the protection circuitry of the battery pack. The longest life and best performance can be obtained if the battery pack is charged at room temperature.11. Disconnect the charger from the power supply when not in use. This will reduce the risk of electric shock or damage to the charger.
Battery pack1. Fully charge the battery pack before first use.2. Recharge the battery pack immediately when the power output starts to slow. DO NOT CONTINUE TO USE THE PRODUCT WHEN THE BATTERY LEVEL IS LOW.3. To prevent serious damage to the battery, charge in temperatures above 5ºC or below 45ºC. The longest life and best performance can be achieved when the battery is charged at room temperature.4. If the battery temperature is above 45ºC it must be allowed to cool before putting it into the charging station.5. To reduce the risk of explosion, ensure the battery pack is not left in the sun for extended periods of time and that it is kept away from fire.6. Do not carry individual battery packs in your pockets or bag as they could short-circuit against other metal items.7. Should a li-ion battery catch fire, ensure to use the correct fire extinguisher to combat the fire. DO NOT THROW WATER ON A BURNING LI-ION BATTERY.8. If the battery pack becomes too hot during charging, disconnect and switch off immediately. Contact the service center directly.9. Do not attempt to open the battery yourself.10. When the battery pack is not in use keep it away from other metal objects such as paperclips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another.
Maintenance and storage1. Keep all nuts, bolts, and screws tight to be sure the product is in a safe working condition.2. Check the grass collector frequently for wear or deterioration.3. Be careful when adjusting the product to prevent trapping fingers between moving blades or other fixed parts of the product.4. Always allow the product to cool down before storing.5. When servicing the blades be aware that even though the power source is switched off, the blades can still move.6. Replace worn or damaged parts for safety. Use only genuine replacement parts and accessories.7. DO NOT attempt to open the charger and battery pack. There are no customer serviceable parts inside. Return to any authorized service center.8. Store the appliance with a battery pack fully charged at room temperature (around 20ºC).9. Every deep discharge cycle decreases the capacity of the battery pack. To prolong battery life, it is recommended that you charge the battery every six months within extended periods of time when the product is not in use.
Servicing1. Have your tool been repaired by an authorized service agent? This tool is manufactured in accordance with the relevant safety regulations. To avoid danger, equipment must only be repaired by qualified technicians.2. Only use parts and accessories made for this machine by the manufacturer. Failure to do so can result in personal injury.
SYMBOLS
Safety symbolsThe purpose of safety symbols is to attract your attention to any possible dangers. The safety symbols and their explanations deserve your careful attention and full understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no substitute for proper accident prevention measures. WARNING: Be sure to read and understand all safety instructions within this operator’s manual, including all safety alert symbols such as “DANGER”, “WARNING”, and “CAUTION” before using this tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury.
SAFETY ALERT SYMBOLS: Indicate DANGER, WARNING, or CAUTION. May be used in conjunction with other symbols or pictographs.
Symbol meaningsThis page depicts and describes safety symbols that may appear on this product. Read, fully understand and follow all instructions on the machine before attempting to assemble and operate.
To reduce the risk of injury, user mustread instruction manual carefully.
Avoid using tool in the rain. Wait until all machine components have completely stopped before touching them.
Keep bystanders away. Objects thrown by the product could hit the user or other bystanders. Always ensure that other people and pets remain at a safe distance from the product when it is in operation.
Beware of sharp blades. Blades continue to rotate after the motor is switched off. Remove disabling device before performing any maintenance tasks.
The guaranteed sound power level value is 96 dB
Wear ear protection, eye protection, and gloves when using the product.
Do not use a mower without a grass catcher or guard in place.
WEEE symbol. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or local store for recycling guidelines
The product complies with the applicable European directives and an evaluation method of conformity for these directives was done.
Warning symbols on the battery pack
To reduce the risk of injury, user must read instruction manual carefully.
Do not throw into water.
Do not throw on fire.
Do not subject the battery to strong sunlight over long periods of time. Do not leave on a heater (max.45°C).
Batteries contain Li-ion. Do not dispose of waste batteries in domestic waste. Contact local authority to find out how to dispose of batteries.The product complies with the applicable European directives and an evaluation method of conformity for these directives was done.
WEEE symbol. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice.Warning symbols on the charger To reduce the risk of injury, user must read the instruction manual carefully.
The charger is for indoor use only.
Double insulation
Protective 3.15 A limited WEEE symbol. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice. The product complies with the applicable European directives and an evaluation method of conformity for these directives was done.
TECHNICAL DATA
| Mower Type | LM C32A | |
| Nominal voltage of product with battery |  |
20V  |
| No-load cutting speed |  |
3500 min1 |
| Cutting width |  |
32 cm |
| Cutting height | 25-65mm, 3 positions | |
| Capacity of grass bag | 30 l | |
| Weight |  |
9.5 kg |
| Measured sound pressure level(LpA | 90 dB(A), K=3 dB(A) | |
| Guaranteed sound power level | 96 dB(A) | |
| Vibrations | < 2.5 m/s² K=1.5 m/s² * | |
| Battery pack Model | B0P-SP06-20-D | |
| Battery capacity | 4.0 Ah | |
| Battery charging time Max. | 100 min | |
| Battery charger Model | VDE: B0Q-SP06-20ZABS: B0Q-SP06-20ZB | |
| Input | 220-240V AC, 50/60Hz 65 W | |
| Output | 20V 2.44 |
|
| Protection class | II |
The sound values have been determined according to the noise test code given in EN 60335-2-77, using the basic standards EN ISO 11201 and EN ISO 3744.The sound intensity level for the operator may exceed 80 dB(A) and ear protection measures are necessary.The declared vibration value has been measured in accordance with a standard test method (according to EN 60335-2-77) and may be used for comparing one product with another. The declared vibration value may also be used in a preliminary assessment of exposure.
WARNING: Depending on the actual use of the product the vibration values can differ from the declared total!Adopt proper measures to protect yourself against vibration exposure! Take the whole work process including times the product is running under no-load or switched off into consideration!
DESCRIPTION OF PRODUCT
Parts description (Fig. A)1. Switch box2. Lower handle3. Carrying handle4. Battery pack cover5. Rear wheel6. Grass bag7. Quick release knob8. Switch lever9. Top handleCheck the delivery parts (Fig. B)Remove the machine from its packaging carefully and make sure that all of the following parts are present:a. Lawnmower with upper handleb. Grass bagc. Lower handled. Manuale. Quick-release knobf. Cable clipg. Battery packh. Charger WARNING: If any parts are damaged or missing, do not operate this tool until these parts have been replaced. Failure to heed this warning could result in serious personal injury. NOTE: Always recycle the packaging in accordance with local recycling guidelines.
INSTALLATION
Assemble the lower handle1. Attach the lower brace to the deck. （Fig, C）2. Use two installation screws to fix the lower brace.（Fig, D）Attach the top handle to the lawnmower (Fig. E)Mount the top handle to the lower handle using the two bolts and handle knobs.Fitting the cable clip (Fig. F)Ensure that the cable clips supplied are used to fix the cable to the lower handleAssembly of the Grassbox1. Align the top half of the grass box cover to the lower part and clip to together –start at front and work around the grassbox until fully clipped together. （Fig. G）2. Now assemble the grassbox handle as per fig HAttach Grassbox to the LawnmowerLift the lawnmower Safety flap and locate the Grassbox onto the lawnmower support hooks fig I
OPERATION
Charging the battery packNOTE: Remove the battery pack from the charger after it has been fully charged.NOTE: Battery should be fully charged before first use.NOTE: Make sure the mains voltage is the same as the rating label which is located on the charger.1. Connect the charger to a power supply. Red LED will light up.2. To insert the battery pack into the charger, align the raised ribs of the battery pack with the grooves of the charger then push it in. (Fig. J)3. The red LED light of the charger will light up and then the green light flashes during normal charging.4. After charging is complete, the charger light will turn to a solid green light.5. Once the battery is fully charged, depress the battery release button and then remove the battery pack.Power indicator (See Fig. K)This Li-Ion battery pack is equipped with a power indicator which is used to show the battery pack’s remaining charge. Press the power indicator button to check battery charge as the picture showed. The indicator will stay lit for approximately 4 seconds.
To obtain the best life from the battery1. Never allow the battery to completely discharge before recharging. The battery pack should be placed on the charger whenever the battery pack is noticeably running downor the tool no longer performs a task it previously performed.2. Avoid conducting short charges. Make sure that the battery is fully charged each time by allowing the charger to complete its full charging cycle.3. Avoid allowing loose items like screws or nails etc. to be stored with battery packs as these or similar items can short battery packs and cause a fire or explosion.4. Always unplug the charger when not in use and store in a dry and secure place.5. Avoid charging or storing your battery in temperatures below 5°C and above 45°C.6. After use, allow the battery pack to cool down for approximately 30 minutes before attempting to recharge.Setting cutting height (Fig. L)1. Adjust the cutting height according to the needs of your lawn.2. When mowing high grass, start with the maximum cutting height and make a second cut with a lower cutting height.WARNING: Before cutting your lawn, set the cutting height, always ensure that the battery pack has been removed.
Removing and inserting the battery packInsert the battery pack. (Fig. M)Align the battery pack with the compartment of the tool. Push the battery pack into position until you hear a click. This means the battery pack has been locked in position, then close the battery pack cover.Removing the battery pack from the tool (Fig. N)Open the battery pack cover. release button and then remove the battery pack.NOTE: Safety-Key (Fig. O)This lawnmower is fitted with a safety key; this prevents the accidental start up of your cordless lawnmower.The safety key has been designed to totally disable the lawnmower when it is removed.Switching on and off (Fig. P)Switch on:1. Press and hold the safety button on the side of the switch box with one hand.2. Pull the switch lever towards the handle and hold it with the other hand. Switch off:Release the switch lever.NOTE: Do not continue to press the start button after an automatic shut-off of the machine, this will lead to battery damage.WARNING:When the motor has been switched off, the blade will continue to run for several seconds. Do not touch the underside of the mower until the cutter has come to a complete standstill!Operating the lawnmowerNOTE: Do not start the lawnmower in the thick Grass–alway start in lower height grass Operation on a slope:Slopes increase the risk of slip-and-fall accidents, which can result in severe injury. Always be sure of your footing on slopes. Operation on slopes requires extra caution. If you feel uneasy on a slope, do not mow it.Do:– Mow across the face of slopes, never mow up and down. Exercise extreme caution when changing direction on slopes.– Watch for holes, ruts, rocks, hidden objects or bumps which could cause you to slip or trip. Tallgrass can hide obstacles.
Do not:
– Do not mow near drop-offs, ditches or embankments; you could lose your footing or balance.– Do not mow slopes greater than 15 degrees.– Do not mow on wet grass. Unstable footing could cause you to slip.Mower overload protectionTo prevent overload conditions, do not try to cut too much grass at one time. Slow down your cutting pace or raise the cut height. Your mower has built-in overload circuit protection. When the mower is overloaded, the motor will stop. Switch the mower off and check to see if grass has collected beneath the deck and clear it if necessary, then restart the mower.
Battery high-temperature protectionThe battery pack will generate heat during operation. The heat dissipates slower in hot weather. If the battery temperature exceeds more than 70oC during operation, the protection circuit will immediately turn off the mower to protect the battery pack from damage. Release the bail handle, wait until the battery pack cools down and then restart the mower.Function of full indicator (Fig. Q)If the grass bag is empty or it is not filled with grass, the grass full indicator will be open.If the grass bag is filled with grass the grass full indicator will be closed.Emptying the grass bagAs soon as the grass bag indicator closes while you are mowing this means that it is time to empty the grass bag.NOTE: Before taking off the grass bag, switch off the mower and wait until the blade has come to a complete stop.To take off the grass bag, use one hand to lift up safety flap and the other to grab onto the carry handle. The safety flap automatically falls down after removing the grass bag and closes off the rear chute opening.Empty out the grass bag then refit to a machine.NOTE: If any grass residue is caught in the discharge chute, clean it using a brush. Do not remove grass debris in the mower casing or on the blade by hand or with your feet. Instead, use suitable tools such as a brush or broom. To ensure that the cut grass can be collected into grass bag, the discharge opening and inside the mower casing must be cleared of any blockages.
MAINTENANCE AND STORAGE
WARNING: Before performing any maintenance or cleaning work, always ensure that the battery pack/safety key has been removed. Wait until the blade has stopped completely and the machine has cooled down.
CleaningCleaning the product– Use a soft brush to remove accumulated dust and debris. Wear safety glasses to protect your eyes whilst cleaning.– Wipe down the product enclosure with a slightly damp cloth. Do not spray the unit with water. Water may destroy the switch unit and the electric motor.
MaintenanceNOTE: Always wear gardening gloves when handling or working near sharp blades.1. Keep all nuts, bolts and screws tight to ensure that the machine is in a safe working condition.2. Check the grass bag frequently for wear or deterioration.3. Examine the machine and replace worn or damaged parts for safety.
Removing/Installing the blade (Fig. R)1. Use the correct size wrench to uninstall the blade bolt nut.2. Wearing heavy gloves hold the blade still and turn the wrench anti-clockwise to remove the bolt.3. Fit the replacement blade correctly with marking facing up and align pegs, refit the bolt and retighten securely to torque 20N.m. WARNING: Replace or re-sharpen the mowing blade at the end of the mowing season. Always have the mowing blade re-sharpened or replaced by a recommended Yard Force service center. Unbalanced blades will cause the lawnmower to vibrate violently which can increase the risk of accidents occurring.
Battery maintenance:Use the following procedures to achieve the best battery life:1. Protect the battery against moisture and water.2. Store the battery only within a temperature range of 5 °C to 45°C. Do not leave the battery in direct sunlight for extended periods of time.3. Clean the battery regularly with a soft, clean, and dry brush.4. If you do not use the product for a long time, remember to charge and discharge the battery pack once every 6 months.
MAINTENANCE AND STORAGE
Storage and transportStorageAfter cleaning the unit thoroughly, store the mower in a dry room and allow the motor to cool down.NOTE: Remove the safety key and battery packs. Ensure cables are not trapped when folding/unfolding the handle. If stored vertically make sure the mower is positioned in a corner so that the blade is facing inwards against a wall and the machine is secure to prevent itfrom falling over.TransportUse the original packaging to ship whenever possible.
TROUBLESHOOTING
WARNING: Before performing any repair work, always ensure that the battery pack has been removed.WARNING: Always wear heavy-duty gloves when adjusting or cleaning, especially when handling sharp objects.
| Fault/malfunction | Cause |
Remedy |
| Mower fails to start | Safety key is not inserted | Insert safety key |
| Battery is not correctly inserted | Remove the battery and reinsert | |
| Mower standing in high grass | Start motor on shorter grass or already mowed area, change cutting height if necessary | |
| The mower housing is clogged | Clean housing so that the blade can move freely | |
| Battery has no power | Check and recharge battery | |
| Mower stops working noses power | Cutting height is incorrect | Adjust the cutting height |
| Cutting blade is worn or damaged | Replace with new blade from dealer service centre | |
| Battery performance decreasing | Check the battery performance and charge it if necessary | |
| Grass bag is not filled sufficiently | Cutting height is too Low | Adjust and increase cutting height |
| The lawn/grass is wet | Allow the lawn to dry | |
| Underside of the mower deck is clogged. | Clean the underside of the mower deck | |
| Cutting blade is worn or dam- aged. | Replace it by contacting the custom-er service centre | |
| Mower vibrating at higher speed | Cutting blade is unbalanced | Balance the blade by grinding each cutting edge until equal |
| Blade is Loosened /incorrectly fitted | Tighten the blade bolt | |
| Mower cuts unevenly | The blade is damaged
Blade is assembled incorrectly |
Sharpen the blade or replace Re-assemble blade correctly |
CE DECLARATIONTo the provisions of Council DirectivesWeMEROTEC GmbHOtto-Brenner-Str. 847877 Willich, GermanyDeclare that the product:Machine Description: 20V CORDLESS LAWNMOWERLM C32A / Y0J-SP01-3218ZBFunction: Cutting grass
Complies with the essential health and safety requirements of the following directives: Machinery Directive 2006/42/ECElectromagnetic Compatibility Directive 2014/30/EUEC Directive 2011/65/EU and its amendment Directive (EU) 2015/863 (RoHS)*)Noise Emission in the Environment by Equipment for Use Outdoors Directive2000/14/EC amended by 2005/88/ECWe additionally confirm the following in accordance with the 2000/14/EC Annex VI amended by 2005/88/EC emissions guideline,Measured Sound Power Level: 90dB(A) K=3 dB (A)Declared Guaranteed Sound Power Level: 96 dB (A)Standards and technical specifications referred to :EN60335-2-77:2010EN60335-1:2012+A11: 2014+A13: 2017+A1: 2019+A2: 2019+A14: 2019EN62233:2008EN55014-1:2017EN55014-2:2015EN50581:2012Authorized SignatoryDate: 24.03.2020Signature:
Place: WillichName: Roland MenkenGeneral ManagerMEROTEC GmbHOtto-Brenner-Str. 8, 47877 Willich, Germany* The object of the declaration described above satisfies the provisions of directive 2011/65/ EU of the European Parliament and the Council of 8 June 2011 on limiting the use of certain harmful substances in electrical and electronic appliances.
References
[xyz-ips snippet=”download-snippet”]