Yealink CP700 Ultra Compact Portable Speakerphone User Guide

USB Speakerphone CP700 & CP900User GuideVersion 1.0

Overview

  • Usage Scenarios
  • Hardware Component Instructions
  • Placing Your Speakerphone
Usage Scenarios

Yealink speakerphone is suitable for the following scenarios:

  • Personal use
  • Huddle room

The speakerphone presents the immersive sound for either calls or music and makes the call controls accessible on the speakerphone itself directly.

Hardware Component Instructions

Placing Your Speakerphone
  • Placing the Speakerphone in the Small Meeting Room
  • Placing the Speakerphone on the Desk
Placing the Speakerphone in the Small Meeting Room

Place the speakerphone in the center of the table.The in-room coverage of CP900 is ideal for up to 6 people. Up to 2m/6.5ft from each participant.

The in-room coverage of CP700 is ideal for up to 3 people. Up to 1.5m/4.9ft from each participant.

Placing the Speakerphone on the Desk

Place the speakerphone on the desk.

When using the CP700 at your desk, it is recommended to put the speakerphone upright using the table stand. This will better direct the audio towards you.

Getting Started

  • Powering on the Speakerphone
  • Powering off the Speakerphone
  • Charging the Speakerphone
  • Checking the Battery Status
Powering on the Speakerphone

ProcedureDo one of the following:

  • Plug the speakerphone into a USB power source using the attached USB cable.
  • Hold the Power button for 3 seconds.
Powering off the Speakerphone

ProcedureHold the Power button for 3 seconds.Note: To preserve the battery while unplugged, the speakerphone will automatically power off after 30 minutes of inactivity.

Charging the Speakerphone

Plug the speakerphone into a USB power source.The CP700 battery lasts for up to 9 hours of talk time and takes approximately 3 hours (5V/500mA) to fully charge.The CP900 battery lasts for up to 12 hours of talk time and takes approximately 3 hours (5V/1A) to fully charge.

Checking the Battery Status

Tap the Power button to check the current battery status.

Speakerphone Connection

The speakerphone is compatible with Microsoft Teams/Skype for Business client and Yealink VCD client. It can connect to PC via USB cable or Bluetooth, and to a smartphone via Bluetooth.

  • Connecting to PC via USB Cable
  • Connecting to PC/Smartphone via Bluetooth
Connecting to PC via USB Cable

ProcedurePlug the speakerphone into a USB port on your PC.

Note: If there is no sound coming from your speakerphone, you may need to set the speakerphone as the playback device for your PC.

Connecting to PC/Smartphone via Bluetooth

You can connect your speakerphone to PC or smartphone via Bluetooth.The speakerphone can save the pairing information of 8 Bluetooth devices connected recently.

  • Tips When using Bluetooth
  • BT50 LED Indicator
  • Single Bluetooth Connection
  • Two Bluetooth Connections
  • Disconnecting the Bluetooth Device
  • Reconnecting to the Bluetooth Device
Tips When using Bluetooth
  • If the Bluetooth feature is not available, you can confirm whether the Bluetooth feature is turned on via Yealink USB Connect, or contact your administrator.
  • The speakerphone will automatically exit the pairing mode if no Bluetooth device is connected within 10 minutes.
  • The LED indicators on the speakerphone will go out after 1 minute of inactivity and enter the power safe mode. In this mode, Bluetooth is still connected. You can manually tap any button to reactivate the speakerphone, or the speakerphone will be automatically activated if you play the music or receive a call.
BT50 LED Indicator

BT50 LED Indicator

LED Indicator Description
Flashing blue Bluetooth connecting
Solid blue Bluetooth connected
Off Bluetooth disconnected

Single Bluetooth ConnectionYou can connect to PC or smartphone via Bluetooth.

  • Connecting to PC via Bluetooth Dongle BT50
  • Connecting to Smartphone

Connecting to PC via Bluetooth Dongle BT50You can connect the speakerphone to the PC via Bluetooth dongle BT50. The USB speakerphone and the BT50 are pre-paired and ready to use out of the box. The Bluetooth range is 30m/100ft.

ProcedureConnect the BT50 into a USB port on your PC.

Note: If there is no sound coming from your speakerphone, you may need to set the BT50 as the playback device for your PC.To manually pair the speakerphone with the BT50, please use Yealink USB connect.

Related informationYealink USB ConnectConnecting to SmartphoneYou can connect the speakerphone to a smartphone via built-in Bluetooth.

Procedure

  1. Hold the Bluetooth button for 2 seconds to enter the pairing mode.
  2. Select the speakerphone from the Bluetooth device list on a smartphone to connect it.

Two Bluetooth ConnectionsYou can connect to one PC and one smartphone at the same time via Bluetooth, or connect two smartphones.

  • Connecting to PC and Smartphone
  • Connecting to Two Smartphones

Connecting to PC and SmartphoneYou can connect your speakerphone to one PC and one smartphone at the same time.

Before you beginYour speakerphone has connected to PC via Bluetooth dongle BT50.

Procedure

  1. Hold the Bluetooth button for 2 seconds.The speakerphone disconnects from the PC.
  2. Select the speakerphone from the Bluetooth device list on the smartphone to connect it.

Related tasksConnecting to PC via Bluetooth Dongle BT50Connecting to Two SmartphonesYou can connect your speakerphone to two smartphones at the same time via built-in Bluetooth.

Before you beginYour speakerphone has connected to smartphone A.

Procedure

  1. Hold the Bluetooth button for 2 seconds.The speakerphone disconnects from smartphone A.
  2. Select the speakerphone from the Bluetooth device list on smartphone B to connect it.If it is the first time to connect, you need to re-connect the speakerphone on smartphone A.

Related tasksConnecting to Smartphone

Disconnecting the Bluetooth DeviceYou can quickly disconnect the Bluetooth connection by tapping a button on the speakerphone

ProcedureDouble-tap the Bluetooth button .

Reconnecting to the Bluetooth DeviceAfter you disconnect a Bluetooth device, you can reconnect it to your speakerphone.

ProcedureTap the Bluetooth button  . Note: If the speakerphone has paired with BT50, when the speakerphone reconnects, it will try to connect the BT50 and the last connected Bluetooth device.

Using the Speakerphone

  • Call Control Features
  • Volume Adjustment and Synchronization
  • Using Teams /Voice Assistant Button
  • Pausing or Playing the Music
  • Resetting to Factory
Call Control Features

You can control the calls on the speakerphone.

  • Answering a Call
  • Rejecting or Ending a Call
  • Muting/Unmuting a Call
  • Holding a Call
  •  Creating a Mix Conference
  • Handling Multiple Calls
Answering a Call

ProcedureIn the ringing state, tap the Answer Call button .

Rejecting or Ending a Call

ProcedureIn the ringing state or during the call, tap the End Call button .

Muting/Unmuting a Call

Procedure

  1. During a call, tap the Mute button to mute the microphone.The Mute LED indicator and LED light-ring glow red.
  2. Tap again to unmute the microphone.

Holding a CallYou can place an active call on hold.

ProcedureDuring a call, tap the Answer Call button .The LED light-ring flashes green.

Creating a Mix ConferenceYou can create a mixed conference on the speakerphone.

Before you begin

  • The speakerphone is connected to a PC via USB cable and connected to PC/ smartphone via Bluetooth.
  • The speakerphone has one USB call and one Bluetooth call.

ProcedureHold the Answer Call button for 3 seconds.The three-way conference for the mixed channel is successfully established.

Handling Multiple Calls

ProcedureYou can do the following:

  • Tap the Answer Call button to put the current call on hold and answer the incoming call.
  • Tap the Answer Call button to switch between held call and active call.
  • Tap the End Call button to reject the incoming call and keep the current call.
Volume Adjustment and Synchronization

ProcedureTap the Volume Up/Volume Down button + / – . Note: The volume will be synchronized between the speakerphone and the connected device. It is limited by the connected device.

Using Teams /Voice Assistant Button

If connected via USB cable or Bluetooth, you can use this button.When used with the Teams client, the button LED indicator is as follows. When the voice assistant is activated, the button always glows white.

LED indicator
LED Indicator Description
Slow-flashing white When there are missed calls/voice mails/Teams meeting notification
Solid white Teams connected
Off Teams disconnected
  • Invoking the Teams Client
  • Activating Voice Assistant
Invoking the Teams Client

ProcedureAfter the Teams client connects, tap the Teams button .

Note: Before using the Teams button functions, you should install the Microsoft Teams client on your PC. It works in a USB cable or BT50 connection.

Activating Voice AssistantYou can activate your smartphone’s voice assistant (Siri®, Google Now™, Cortana™ ).

ProcedureHold the button for 2 seconds. Note: It depends on support from your connected smartphone.

Pausing or Playing the Music

Before you beginYou have connected the speakerphone to a smartphone, and the smartphone is playing music.

Procedure

  1. Tap the End Call button to pause the music.
  2. Tap again to resume the music. Note: If you have connected the speakerphone to PC and smartphone via Bluetooth and both are playing music, tap to switch to another channel instead of pausing the music.
Resetting to Factory

You can reset the speakerphone to factory settings when the speakerphone is idle. After a factory reset, all personalized settings are cleared.

ProcedureHold the Answer Call button and the End Call button for 6 seconds.“Factory reset” is announced by the speakerphone. Note: The Bluetooth pairing information will be cleared after a factory reset. It is necessary to repair the speakerphone with your Bluetooth devices or BT50.

Related informationConnecting to PC/Smartphone via Bluetooth

Software

  • Yealink USB Connect
  • Upgrading the Speakerphone
  • Upgrading the BT50
Yealink USB Connect

Yealink USB device manager client – Yealink USB Connect is the PC software designed to manage the Yealink USB devices, for example, upgrade the USB devices, and pair the USB devices with Bluetooth devices.

You can download the latest version from the Yealink website http://support.yealink.com.

Upgrading the Speakerphone

Firmware updates improve performance or add new functionality to the speakerphone.

Procedure

  1.  Connect the speakerphone to a PC using the USB cable.
  2. Install the Yealink USB Connect on your PC.
  3. Use Yealink USB Connect to check for the latest available firmware.For more information, refer to the Yealink USB Device Manager Client User Guide.
Upgrading the BT50
report this ad

Procedure

  1. Connect the BT50 to a PC.
  2. Install the Yealink USB Connect on your PC.
  3. Use Yealink USB Connect to check for the latest available firmware.For more information, refer to the Yealink USB Device Manager Client User Guide.

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, , ,