YESKAMO Floodlights Cameras with NVR-POE User Guide

YESKAMO Floodlights Cameras with NVR-POE User Guide

Statement

  1. Thanks for purchasing this product. YESKAMO is committed to providing our customers with reliable security solution and protect your property all times.
  2. This is the fast setup guide which only helps you familiar with this product quicker, for more information about product, please refer to the full user manual
  3. Though we apply all efforts to make the manual complete and accurate, there could still be some discrepancies due to products’ timely update. Detailed information is in accordance with the final products.

Safety Caution

  1. Please use the included power supply with the product to prevent damage to the product.
  2. Please avoid any avoidable obstacles and electromagnet product between camera and NVR for beer signal
  3. All man-made damages are outside the scope of free warranty

1. Product Introduction

WiFi Floodlight Security Camera

  1. IR Cut Filter: auto switch day/night
  2. Weatherproof IP66 Housing: working temperature: -20¥/-4 to 60¥/140
  3. 2pcs Floodlight: will turn on atomically in the darkness when AI sensor was triggered
  4. 2pcs IR led: IR lads will atomically switch on at darkness for night vision
  5. Microphone: Pick up audio
  6. Speaker: transmit sound
  7. 2-Axis Mounting Bracket: adjust installation angle and vandal-proof inside cable 360° all-round swiveling and 90° up-down adjusting
  8. RJ45 Ethernet port: connect with supplied ethernet cable for power supply and connect to NVR to transfer signal
  9. Power-in Port: back up port for power supply, connect with 12V 1A, do not cut it. (Not included power supply)

Note: It’s beer to install the cameras under roof or protections to help extend the life of the device.

Network Video Recorder (Abbreviated as NVR)

  1. Lan Port: plug the network cable for each camera into one of these sockets, it will transmit video and power simultaneously.
  2. WAN Port: connect to router with Ethernet cable for remote viewing
  3. DC 48V Power Input: plug the DC power adapter into this socket to provide power to the NVR and cameras
  4. Audio Out: Used for connecting speakers.
  5. VGA video output: connect NVR to VGA input port of your TV/monitor for video and audio output (VGA cable not included)
  6. On/off Button: turn on/turn off the NVR after plugin
  7. HDMI video output: connect NVR to HDMI input port of your TV/monitor (HDMI cable not included)
  8. USB port: for USB mouse control, USB flash drive port for video footage backup and system upgrading
  9. Power Indicator: light on when NVR has power supply
  10. Hard drive Indicator: light on when hard drive is recording

2. Connection Instruction

  1. Check and make sure the power button is turn off.
  2. Plug camera to the socket with provided ethernet cable
  3. Plug NVR to power socket with provided 48V 2A adapter
  4. Plug mouse to NVR
  5. Connect NVR recorder to TV/Monitor with HDMI/VGA cable (Not included)
  6. Turn on the power button
  7. Use Ethernet cable to connect the WAN port of NVR to LAN port of router, make the system online if you want to remotely view the cameras on phone app (Skip it if you only want to view local videos on monitor)

User name: adminPassword: No password (Default password is no password, let it blank and click “Ok” to login the camera system)Note:1. The laptop can’t be used as monitor directly, please use your TV or desktop’s monitor for local viewing

3. What if my TV does not display the image of camera?

The default output resolution for NVR recorder is 1280×1024, which may not be compatible with some screens and it will be black on the monitor. Please adjust the resolution of system to match your monitor as below steps:

  1. Connect the NVR to any other screen via VGA cable to enter the system; (or you may also try any other screen via HDMI to see if you can enter the NVR system).
  2. Once you are able to login/access the NVR system, click right mouse button to enter main menu> system setup >general setup > display resolution > , apply to save it
  3. Connect the NVR to your primary monitor via HDMI/VGA cable. You should have it worked with the primary screen.

NVR optional output resolution: 1024×768, 1280×1024, 1366×768, 1440×900, , (change the output resolution to match your primary monitor)

4. Remotely view the cameras on the phone

http://www.e-seenet.com/download/indexm.php?p=yeskamo

1) Make sure the NVR system is ONLINE status:Connect the WAN port of NVR to LAN port of router with Ethernet cable, then the NVR system will be ONLINE. Right click the mouse to enter main menu > fast network > cloud (P2P) > ONLINE

2) Download free appSearch free APP “EseeCloud” in App store or Google play The phone app will be updated so memes, if your phone app menu is different from the menu in user manual, please contact us to get the latest user manual

3) Create an account and login phone appRegister an account with your email address /phone number and password. A verification code will be send via text.

4) Add Cloud ID:Enter APP > My Device > click “+” in the right top corner or center of the phone > “Add Device”> “Standalone camera/Kit” > Input “Device Cloud ID”> click “Complete”

—Cloud ID:A: Right click the mouse to enter main menu > fast network > cloud (P2P)B: Right boom corner of the monitor—Name of device: customize the system name (such as home, office, room…)—User Name: default is admin (the same as your NVR recorder)—Password: default is no password, leave it blank/empty (same as your NVR system)

5) Remotely view camera via phone:Double tap the screen, and you can view camera anywhere anytime.

6) Two way audio communicationTurn on the “speaker” button at top right corner of phone app and you can hear the audio from camera side. Tap “microphone” button to enter chat screen, then press and hold “microphone” button and you can talkback to camera side. Tap “hang up” button to return preview screen

Note:Only one user can use the “microphone” at one me, others can use the microphone when the first person hangs up.

5. How to do if I delete a camera in YESKAMO NVR recorder? How to add a new POE IP camera?

Keep the camera connect to the NVR via provided Ethernet cable, make sure the LAN port on the NVR is flashing, and the camera video will be live view in 1-2 minutes.Power

6. What’s the furthest distance can this system support? Any requirements to the Ethernet cable?

Generally the distance between the NVR Recorder and cameras should within 80 meters(262) and you can use Cat 5 or high level ethernet cable, for those with oxygen-free copper network cable can transmit more stalely and furtherly.

7. How to manually turn off the floodlight at night?

This floodlight camera has a built in AI sensor and floodlights. The floodlight will automatically switch on at night when detect any suspicious activates and offer true color videos. But you can customize the IR-Cut mode to turn off the floodlight as below steps: Before customizing the IR-Cut mode for a selected channel, please double click the selected channel to enter full screen mode. Right click mouse to enter main menu> color adjustment> IR-Cut mode: Infrared, Daylight, Night, Full Color, Smart Mode

Note:

  • A: The light of floodlight camera lasts for about 20 seconds.
  • B: The me interval for floodlight is about 2 minutes.
  • C: Only under the “Full color” mode and “Smart” mode, the floodlight will turn on at night.

8. How to turn off Siren Alarm from camera side?

There are 6 types of alert available, Buzzer, E-Mail Notice, phone app nonfiction, IPC Alarm, Split Screen and Drawn Region. You can customize the alerts based on your requirement. Take IPC alarm as example, it sounds a siren alarm from camera side when human moon detected. Right click mouse to enter main menu> System Setup> Channel Setup> Video Datacom> select Channel and click “Enable” > disable “IPC Alarm” > Click “Apply” to save the seeing. Please noted, the default channel is channel “1”, revise the channel if you need to setup other channels, such as channel “2-8”.

Note:A: If you choose phone app or email alert for this camera, please make sure your camera system is online, so that you can receive the alerts. For more information, please refer to detailed user manual.B: If you want to setup the same alerts for all channels, please repeat above steps or click “Copy to all”.

Technical Support

report this ad

Website: www.yeskamo.comEmail: [email protected] (for US)[email protected] (for UK)US Cell: +1 830 745 5888UK Cell: +44 20 3807 4763

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, , ,