Z CAM IPMAN S Wireless Video Streaming Device – User Guide

Z CAM IPMAN S Wireless Video Streaming Device – User Guide

 

Z CAM Monitor (App Store)

Z Camera (Google Play)

 

What is in the box?

  • Z CAM IPMAN S main unit x 1.
  • Wi-Fi antenna x 2.

 

How to power up Z CAM IPMAN S?

  • Mount NP-F battery on to the rear socket of the main unit.
  • Press and hold the release button next to the socket to unmount the battery.
  • For external power supply, connect the DC plug to the power socket (6.2~18V) on the side.

 

How to switch on Z CAM IPMANS?

  • Ensure that power is connected.
  • Push power switch upward to ON position to switch on.
  • Push power switch downward to OFF position to switch off.

 

How to feed video signal to the HDMI input of Z CAM IPMAN S?

  • Connect HDMI output of camera or other equipment to HDMI IN of the main unit.

How to get video signal from the HDMI output of Z CAM IPMAN S?

  • Connect HDMI input of monitor or other equipment to HDMI OUT of the main unit.

 

How to install WiFi antenna?

  • Align the bottom of the antenna and the antenna port on top of the main unit.
  • Screw in the antenna clockwise until it is fixed in position.
  • Both antennas need to be installed.

 

How to switch the operating mode of Z CAM IPMAN S?

  • Mode selector on the side of the main unit set to Rx, status display will change to RX.
  • Mode selector on the side of the main unit set to M, status display will change to TX-P.
  • Mode selector on the side of the main unit set to Tx, status display will change to TX.

 

How to use wireless video monitoring feature?

  • Camera HDMI output signal must be 1080p60 or below (1080i is not supported).
  • Connect camera HDMI output to HDMI IN of main unit, set to TX mode.
  • Set another main unit to RX mode, connect HDMI OUT to monitor input.
  • Press and hold the function button in the middle for two second until pairing icon shows up.
  • Release the function button and wait for auto pairing.
  • Channel number on both units should be the same once pairing is successful.
  • Once there is a camera HDMI signal output it will be streamed to the RX connected monitor.
  • Repeat above procedure to add RX main unit up to a maximum of four.

 

How to use mobile devices for video monitoring?

  • Download and install “Z CAM Monitor” app on iOS devices. (use Z Camera app on Android devices)
  • Camera HDMI output signal must be 1080p60 or below (1080i not supported).
  • Connect camera HDMI output to HDMI IN of main unit, set to TX mode.
  • Note the SSID on the top left corner of main unit display.
  • Open “Z CAM Monitor” app, click the bottom right wireless hotspot icon , enter SSID and tap the arrow sign to connect.
  • Once there is a camera HDMI signal output it will be streamed to the “Z CAM Monitor” app.
  • Repeat above procedure to add mobile devices up to a maximum of four.

 

How to connect to a wireless router?

* This feature is not yet supported on Android.）

  • Select M mode on the main unit.
  • Connect iOS device to main unit using USB-C to Lightning cable.
  • Turn on the main unit and iOS device, open the Z CAM Monitor app.
  • Tap the bottom right wireless network icon . Available wireless networks will be shown.
  • Select the wireless network, enter password and and tap the arrow sign to connect.
  • Connected WiFi SSID and IP address will be shown on the main unit display.

Please visit www.z-cam.com for latest product information and user guide.

Disclaimer: All product features and technical specifications stated are subjected to the sole interpretation and explanation of Shenzhen Imagine Vision Technology Limited.

 

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,