Freezer ZYAN8FW0
User ManualGETTING STARTED? EASY.ZYAN8FW0EN User Manual Freezer
VISIT OUR WEBSITE TO:Get usage advice, brochures, trouble shooter, service and repair information: www.zanussi.com/supportSAFETY INFORMATIONBefore the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.CHILDREN AND VULNERABLE PEOPLE SAFETY · This appliance can be used by children aged from 8 years andabove and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. · Children aged from 3 to 8 years are allowed to load and unload the appliance provided that they have been properly instructed. · This appliance may be used by persons with very extensive and complex disabilities provided that they have been properly instructed. · Children of less than 3 years of age should be kept away from the appliance unless continuously supervised. · Do not let children play with the appliance. · Children shall not carry out cleaning and user maintenance of the appliance without supervision. · Keep all packaging away from children and dispose of it appropriately.GENERAL SAFETY · This appliance is intended to be used in household and similarapplications such as: Farm houses; staff kitchen areas in shops, offices and otherworking environments;2
By clients in hotels, motels, bed and breakfast and other residential type environments.· To avoid contamination of food respect the following instructions: do not open the door for long periods; clean regularly surfaces that can come in contact with food and accessible drainage systems;· WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.· WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.· WARNING: Do not damage the refrigerant circuit. · WARNING: Do not use electrical appliances inside the foodstorage compartments of the appliance, unless they are of the type recommended by the manufacturer. · Do not use water spray and steam to clean the appliance. · Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects. · When the appliance is empty for long period, switch it off, defrost, clean, dry and leave the door open to prevent mould from developing within the appliance. · Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance. · If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard.SAFETY INSTRUCTIONS
INSTALLATIONWARNING! Only a qualified person must install this appliance.· Remove all the packaging. · Do not install or use a damaged appliance. · Follow the installation instructions supplied withthe appliance.
· Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.· Make sure the air can circulate around the appliance.· At first installation or after reversing the door wait at least 4 hours before connecting the appliance to the power supply. This is to allow the oil to flow back in the compressor.
3
· Before carrying out any operations on the appliance (e.g. reversing the door), remove the plug from the power socket.· Do not install the appliance close to radiators or cookers, ovens or hobs.· Do not expose the appliance to the rain. · Do not install the appliance where there is directsunlight. · Do not install this appliance in areas that are toohumid or too cold. · When you move the appliance, lift it by the frontedge to avoid scratching the floor.ELECTRICAL CONNECTIONWARNING! Risk of fire and electric shock.
WARNING! When positioning the appliance, ensure the supply cord is not trapped or damaged.
WARNING! Do not use multi-plug adapters and extension cables.
· The appliance must be earthed. · Make sure that the parameters on the ratingplate are compatible with the electrical ratings of the mains power supply. · Always use a correctly installed shockproof socket. · Make sure not to cause damage to the electrical components (e.g. mains plug, mains cable, compressor). Contact the Authorised Service Centre or an electrician to change the electrical components. · The mains cable must stay below the level of the mains plug. · Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation. · Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
USE
WARNING! Risk of injury, burns, electric shock or fire.
The appliance contains flammable gas, isobutane (R600a), a natural gas with a high level of environmental compatibility. Be careful not to cause damage to the refrigerant circuit containing isobutane.
· Do not change the specification of this appliance.· Do not put electrical appliances (e.g. ice cream makers) in the appliance unless they are stated applicable by the manufacturer.· If damage occurs to the refrigerant circuit, make sure that there are no flames and sources of ignition in the room. Ventilate the room.· Do not let hot items to touch the plastic parts of the appliance.· Do not put soft drinks in the freezer compartment. This will create pressure on the drink container.· Do not store flammable gas and liquid in the appliance.· Do not put flammable products or items that are wet with flammable products in, near or on the appliance.· Do not touch the compressor or the condenser. They are hot.· Do not remove or touch items from the freezer compartment if your hands are wet or damp.· Do not freeze again food that has been thawed. · Follow the storage instructions on thepackaging of frozen food. · Wrap the food in any food contact materialbefore putting it in the freezer compartment.INTERNAL LIGHTINGWARNING! Risk of electric shock.· Concerning the lamp(s) inside this product and spare part lamps sold separately: These lamps are intended to withstand extreme physical conditions in household appliances, such as temperature, vibration, humidity, or are intended to signal information about the operational status of the appliance. They are not intended to be used in other applications and are not suitable for household room illumination.CARE AND CLEANINGWARNING! Risk of injury or damage to the appliance.· Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.· This appliance contains hydrocarbons in the cooling unit. Only a qualified person must do the maintenance and the recharging of the unit.· Regularly examine the drain of the appliance and if necessary, clean it. If the drain is blocked, defrosted water collects in the bottom of the appliance.
4
SERVICE· To repair the appliance contact the Authorised Service Centre. Use original spare parts only.· Please note that self-repair or non-professional repair can have safety consequences and might void the guarantee.· The following spare parts will be available for 7 years after the model has been discontinued: thermostats, temperature sensors, printed circuit boards, light sources, door handles, door hinges, trays and baskets. Please note that some of these spare parts are only available to professional repairers, and that not all spare parts are relevant for all models.· Door gaskets will be available for 10 years after the model has been discontinued.DISPOSALWARNING! Risk of injury or suffocation.
· Disconnect the appliance from the mains supply.· Cut off the mains cable and discard it. · Remove the door to prevent children and pets tobe closed inside of the appliance. · The refrigerant circuit and the insulationmaterials of this appliance are ozone-friendly. · The insulation foam contains flammable gas.Contact your municipal authority for information on how to discard the appliance correctly. · Do not cause damage to the part of the cooling unit that is near the heat exchanger.
INSTALLATION
WARNING! Refer to Safety chapters.
5
H1 H2D1 D2D3
DIMENSIONS
W1 W3W2
Overall dimensions1)
H1
mm
845
W1
mm
560
D1
mm
575
1) the height, width and depth of the appliance without the handle and feet
Space required in use1)
H2
mm
945
W2
mm
760
Space required in use1)
D2
mm
650
1) the height, width and depth of the appliance including the handle, plus the space necessary for free circulation of the cooling air
Overall space required in use1)
H2
mm
945
W3
mm
760
6
Overall space required in use1)
D3
mm
1165
1) the height, width and depth of the appliance including the handle, plus the space necessary for free circulation of the cooling air, plus the space necessary to allow door opening to the minimum angle permitting removal of all internal equipment
LOCATIONThis appliance is not intended to be used as a builtin appliance.In case of different installation from freestanding respecting space required in use dimensions, the appliance will function correctly but energy consumption might increase slightly.To ensure appliance’s best functionality, you should not install the appliance in the nearby of the heat source (oven, stoves, radiators, cookers or hobs) or in a place with direct sunlight. Make sure that air can circulate freely around the back of the cabinet.This appliance should be installed in a dry, well ventilated indoor position.To ensure best performance, if the appliance is positioned below an overhanging wall unit, the minimum distance between the top of the cabinet shall be maintained. Ideally, however, the appliance should not be positioned below overhanging wall units. One or more adjustable feet at the base of the cabinet ensure that the appliance stands level.CAUTION! If you position the appliance against the wall, use back spacers provided or keep the minimum distance indicated in the installation instructions.
If you have any doubts regarding where to install the appliance, please turn to the vendor, to our customer service or to the nearest Authorised Service Centre.
It must be possible to disconnect the appliance from the mains power supply. The plug must therefore be easily accessible after installation.
ELECTRICAL CONNECTIONCAUTION! Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
WARNING! This appliance must be earthed. The manufacturer declines any liability should these safety measures not be observed.
The wires in the mains lead are coloured in accordance with the following code:
A
B
C D E
CAUTION! If you install the appliance next to a wall, refer to the installation instructions to understand the minimum distance between the wall and the side of the appliance where door hinges are to provide enough space to open the door when the internal equipment is removed (e.g. when cleaning).This appliance is intended to be used at ambient temperature ranging from 10°C to 43°C.The correct operation of the appliance can only be guaranteed within the specified temperature range.
· A – green and yellow: Earth · C – brown: Live · D – blue: NeutralAs the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:1. Connect the wire coloured green and yellow to the terminal marked either with the letter “E” orby the earth symbol or coloured green and yellow.
7
2. Connect the wire coloured blue to the terminal either marked with the letter “N” or coloured black.3. Connect the wire coloured brown to the terminal either marked with the “L” or coloured red.4. Check that no cut, or stray strands of wire is present and the cord clamp (E) is secure over the outer sheath. Make sure the electricity supply voltage is the same as that indicated on the appliance rating plate.5. Switch on the appliance.The appliance is supplied with a 13 amp fuse (B). In the event of having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used.WARNING! A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that it is disposed of safely.
DOOR REVERSIBILITYWARNING! Before carrying out any operations, remove the plug from the power socket.1. Make sure the appliance stands upright. 2. Open the door and remove the doorequipment. Refer to “Daily Use” chapter. Close the door. 3. Unscrew the screws on the back of the top cover.
RUBBER SUPPORTING PADThere is no need to install this additional equipment provided in a bag to your appliance during normal use.However, there is a risk the appliance become unstable when all food products are placed only on door shelves. In this case install the rubber supporting pad:
4. Lift the top cover and place it on a soft surface. 5. Unscrew the 4 screws.
1. Tilt the appliance carefully on a soft foam packaging or similar material to avoid any damage to the back of the appliance and the floor.2. Find a hole in a lower base cover and insert a screw into the rubber supporting pad.3. Screw it to the base cover with a cross screwdriver.
6. Lift the upper hinge and put it in a safe place together with the screws.7. Lift the door and put it on a soft surface. 8. Tilt the appliance carefully on a soft foampackaging or similar material to avoid any damage to the back of the appliance and the floor. 9. Unscrew the screws of the bottom hinge and adjustable feet.
8
10. Install the pin in the opposite hole of the hinge.
15. Screw the remaining 2 screws on the top side of the appliance with no hinge.16. Place the top cover on the appliance and tighten the screws on the back.
11. Screw the bottom hinge on the other side of the appliance.12. Install the rubber support on the side with no hinge.13. Fit the door on the lower hinge making sure the hinge pin enters the door bottom hole.14. Install the upper hinge on the opposite side of the appliance. Fit the upper hinge pin into the door upper hole. Tighten the screws.
Install the door equipment.Wait at least 4 hours before connecting the appliance to the power supply.
OPERATION
SWITCHING ON Insert the plug into the wall socket.SWITCHING OFF To turn off the appliance, remove the plug from the power socket.TEMPERATURE REGULATION The temperature is regulated automatically. However, you can set a temperature inside the appliance yourself.DAILY USE
Choose the setting keeping in mind that the temperature inside the appliance depends on:· room temperature, · frequency of opening the door, · quantity of food stored, · appliance location.A medium setting is generally the most suitable one.
FREEZING FRESH FOODThe freezer compartment is suitable for freezing fresh food and storing frozen and deep-frozen food for a long time.
Store the fresh food evenly distributed in the first and second compartment or drawer from the top.
9
The maximum amount of food that can be frozen without adding other fresh food during 24 hours is specified on the rating plate (a label located inside the appliance).STORAGE OF FROZEN FOODWhen activating an appliance for the first time or after a period out of use, before putting the products in the compartment let the appliance run at least 3 hours. The freezer drawers ensure that it is quick and easy to find the food package you want. If large quantities of food are to be stored, remove all drawers, except for the bottom drawer which needs to be in place to provide good air circulation. Keep the food no closer than 15 mm from the door.CAUTION! In the event of accidental defrosting, for example due to a power failure, if the power has been off for longer than the value shown on rating plate under “rising time”, the defrosted food must be consumed quickly or cooked immediately then cooled and then re-frozen.
THAWINGDeep-frozen or frozen food, prior to being used, can be thawed in the refrigerator or at room temperature, depending on the time available for this operation.Small pieces may even be cooked still frozen, directly from the freezer: in this case, cooking will take longer.
HINTS AND TIPS
HINTS FOR ENERGY SAVING· The internal configuration of the appliance is the one that ensures the most efficient use of energy.· Do not open the door frequently or leave it open longer than necessary.· The colder the temperature setting, the higher the energy consumption.· Ensure a good ventilation. Do not cover the ventilation grilles or holes.HINTS FOR FREEZING· Before freezing wrap and seal fresh food in: aluminium foil, plastic film or bags, airtight containers with lid.· For more efficient freezing and thawing divide food into small portions.· It is recommended to put labels and dates on all your frozen food. This will help to identify foods and to know when they should be used before their deterioration.· The food should be fresh when being frozen to preserve good quality. Especially fruits and vegetables should be frozen after the harvest to preserve all of their nutrients.
· Do not freeze bottles or cans with liquids, in particular drinks containing carbon dioxide they may explode during freezing.· Do not put hot food in the freezer compartment. Cool it down at room temperature before placing it inside the compartment.· To avoid increase in temperature of already frozen food, do not place fresh unfrozen food directly next to it. Place food at room temperature in the part of the freezer compartment where there is no frozen food.· Do not eat ice cubes, water ices or ice lollies immediately after taking them out of the freezer. Risk of frostbites.· Do not re-freeze defrosted food. If the food has defrosted, cook it, cool it down and then freeze it.HINTS FOR STORAGE OF FROZEN FOOD· Freezer compartment is the one marked with. · The medium temperature setting ensures goodpreservation of frozen food products. Higher temperature setting inside the appliance may lead to shorter shelf life. · The whole freezer compartment is suitable for storage of frozen food products.
10
· Leave enough space around the food to allow air to circulate freely.· For adequate storage refer to food packaging label to see the shelf life of food.· It is important to wrap the food in such a way that prevents water, humidity or condensation from getting inside.SHOPPING TIPSAfter grocery shopping: · Ensure that the packaging is not damaged – thefood could be deteriorated. If the package is swollen or wet, it might have not been stored inSHELF LIFE
the optimal conditions and defrosting may have already started. · To limit the defrosting process buy frozen goods at the end of your grocery shopping and transport them in a thermal and insulated cool bag. · Place the frozen foods immediately in the freezer after coming back from the shop. · If food has defrosted even partially, do not refreeze it. Consume it as soon as possible. · Respect the expiry date and the storage information on the package.
Type of food
Shelf life (months)
BreadFruits (except citrus)VegetablesLeftovers without meatDairy food:Butter Soft cheese (e.g. mozzarella) Hard cheese (e.g. parmesan, cheddar)Seafood:Fatty fish (e.g. salmon, mackerel) Lean fish (e.g. cod, flounder) Shrimps Shucked clams and mussels Cooked fishMeat:Poultry Beef Pork Lamb Sausage Ham Leftovers with meatCARE AND CLEANING
36 – 128 – 101 – 26 – 9 3 – 4 62 – 3 4 – 6 12 3 – 4 1 – 29 – 12 6 – 12 4 – 6 6 – 9 1 – 2 1 – 2 2 – 3
WARNING! Refer to Safety chapters.
CLEANING THE INTERIORBefore using the appliance for the first time, the interior and all internal accessories should be washed with lukewarm water and some neutral
11
soap to remove the typical smell of a brand-new product, then dried thoroughly.CAUTION! Do not use detergents, abrasive powders, chlorine or oilbased cleaners as they will damage the finish.CAUTION! The accessories and parts of the appliance are not suitable for washing in a dishwasher.PERIODIC CLEANINGThe equipment has to be cleaned regularly: 1. Clean the inside and accessories withlukewarm water and some neutral soap. 2. Regularly check the door seals and wipe themclean to ensure they are clean and free from debris. 3. Rinse and dry thoroughly.DEFROSTING OF THE APPLIANCECAUTION! Never use sharp metal tools to scrape off frost from the evaporator as you could damage it. Do not use a mechanical device or any artificial means to speed up the thawing process other than those recommended by the manufacturer.About 12 hours prior to defrosting set a lower temperature in order to build up sufficient chill reserve in case of any interruption in operation.Defrost the freezer compartment when the frost layer reaches a thickness of about 3-5 mm. To defrost freezer compartment:TROUBLESHOOTING
1. Switch off the appliance or pull out electrical plug from the wall socket.2. Remove any stored food, wrap it in several layers of newspaper and put it in a cool place.CAUTION! A temperature rise of the frozen food packs during defrosting may shorten their safe storage life. Do not touch frozen goods with wet hands. Hands can freeze to the goods.3. Leave the door open. Protect the floor from the defrosting water e.g. with a cloth or a flat vessel.4. In order to speed up the defrosting process, place a pot of warm water in the freezer compartment. In addition, remove pieces of ice that break away before defrosting is complete.5. When defrosting is complete, dry the interior thoroughly.6. Switch on the appliance and close the door. 7. Set the temperature regulator to obtain themaximum coldness and run the appliance for three hours using this setting.Only after this time put the food back into the freezer compartment.PERIODS OF NON-OPERATIONWhen the appliance is not in use for long periods, take the following precautions:1. Disconnect the appliance from electricity supply.2. Remove all food. 3. Defrost the appliance. 4. Clean the appliance and all accessories. 5. Leave the door open to prevent unpleasantsmells.
WARNING! Refer to Safety chapters.
WHAT TO DO IF…ProblemThe appliance does not operate.
Possible cause The appliance is switched off.
Solution Switch on the appliance.
12
Problem
Possible cause
Solution
The appliance is noisy. The compressor operates continually.Door is misaligned or interferes with ventilation grill. Door does not open easily. There is too much frost and ice.Water flows inside the refrigerator.
The mains plug is not connected to the mains socket correctly.There is no voltage in the mains socket.The appliance is not supported properly.Temperature is set incorrectly.Many food products were put in at the same time.The room temperature is too high.Food products placed in the appliance were too warm.The door is not closed correctly.The appliance is not levelled.You attempted to re-open the door immediately after closing.The door is not closed correctly.The gasket is deformed or dirty.Food products are not wrapped properly.Temperature is set incorrectly.Appliance is fully loaded and is set to the lowest temperature.Temperature set in the appliance is too low and the ambient temperature is too high.Food products prevent the water from flowing into the water collector.The water outlet is clogged.
Connect the mains plug to the mains socket correctly.Connect a different electrical appliance to the mains socket. Contact a qualified electrician. Check if the appliance stands stable. Refer to “Operation” chapter.Wait a few hours and then check the temperature again. Refer to “Installation” chapter.Allow food products to cool to room temperature before storing. Refer to “Closing the door” section. Refer to installation instructions. Wait a few seconds between closing and re-opening of the door. Refer to “Closing the door” section. Refer to “Closing the door” section. Wrap the food products better.Refer to “Operation” chapter. Set a higher temperature. Refer to “Operation” chapter. Set a higher temperature. Refer to “Operation” chapter.Make sure that food products do not touch the rear plate.Clean the water outlet.
13
Problem
Possible cause
Solution
Water flows on the floor.The temperature in the appliance is too low/too high.
The melting water outlet is not connected to the evaporative tray above the compressor.The temperature is not set correctly.The door is not closed correctly.The food products’ temperature is too high.Many food products are stored at the same time.The thickness of the frost is greater than 4-5 mm.The door has been opened often.There is no cold air circulation in the appliance.
Attach the melting water outlet to the evaporative tray.Set a higher/lower temperature.Refer to “Closing the door” section.Let the food products temperature decrease to room temperature before storage.Store less food products at the same time.Defrost the appliance.Open the door only if necessary.Make sure that there is cold air circulation in the appliance. Refer to “Hints and Tips” chapter.
If the advice does not lead to the desired result, call the nearest Authorized Service Centre.CLOSING THE DOOR 1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to “Installation” chapter.3. If necessary, replace the defective door gaskets. Contact the Authorised Service Centre.
14
NOISES
SSSRRR!
CLICK!
BLUBB!
BRRR! HISSS!
TECHNICAL DATA
The technical information is situated in the rating plate on the internal side of the appliance and on the energy label.The QR code on the energy label supplied with the appliance provides a web link to the information related to the performance of the appliance in the EU EPREL database. Keep the energy label for reference together with the user manual and all other documents provided with this appliance.
It is also possible to find the same information in EPREL using the link https://eprel.ec.europa.eu and the model name and product number that you find on the rating plate of the appliance.See the link www.theenergylabel.eu for detailed information about the energy label.
INFORMATION FOR TEST INSTITUTES
Installation and preparation of the appliance for any EcoDesign verification shall be compliant with EN 62552. Ventilation requirements, recess dimensions and minimum rear clearances shall be
as stated in this User Manual at Chapter 3. Please contact the manufacturer for any other further information, including loading plans.
15
ENVIRONMENTAL CONCERNS
Recycle materials with the symbol . Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of appliances marked
with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.
16*
804182811-C-502020
WWW.ZANUSSI.COM/SHOP
References
[xyz-ips snippet=”download-snippet”]