ZEBRONICS 4.1 Speaker Zeb-Indie User Manual

ZEBRONICS 4.1 Speaker Zeb-Indie User Manual

www.zebronics.com

Front Panel description

  1. SD: SD/MMC Card Slot
  2. INPUT: Select the Input source (Aux, Bluetooth, USB, SD, or FM)
  3. PREV: In USB/SD mode: Press to go to the previous track. In FM mode: Press to go to the previous pre-saved FM channel. In all modes: Press and hold to decrease the volume.
  4. PLAY: In USB/SD mode: Press to Play the track. Press again to Pause the playing track. Press to Play again. In FM mode: Long Press to search and save the FM Channels. Short Press will Mute the audio in Aux & FM Modes. Press again to release it from Mute.
  5. NEXT: In USB/SD mode: Press to go to the next track. In FM mode: Press to go to the next pre-saved FM channel. In all modes: Press and hold to increase the volume.
  6. USB: USB Port for the pen drive
  7. VOLUME: Volume+/- control
  8. TREBLE: Treble +/- control
  9. BASS: Bass +/- control
Features:

4.1 Channel speakerWireless BT/USB/SD/AUX/FMLED displayLED light on satellitesRhythmic LED light on Subwoofer16.51 cm SubwooferRemote controlVolume, bass & treble adjustment

Frequency response : 40Hz – 20kHzS/N Ratio: ≥72dBSeparation : ≥45dBFile format support(USB/SD) : MP3Line input: 2ch RCAMax. supported USB/SDmemory size: 32GBFM frequency range : 87 MHz – 108 MHzBT name: ZEB-INDIEBT version: 4.2+EDRProduct dimension (W x D x H)Subwoofer: 218 x 372 x 324 mm mSatellite: 116 x 101 x 323 mNet. weightSubwoofer: 5.1kgSatellites: 850g x 4Total: 8.5kg

Specification:

Output power (RMS)Subwoofer: 45 WattsSatellites: 15 Watts x 4Total: 105 WattsDriver sizeSubwoofer: 16.51 cmSatellites: 7.62 cm x 4ImpedanceSubwoofer: 8ΩSatellite: 4Ω

Rear panel description

 

 

 

Remote Control Description

 

 

BLUETOOTH CONNECTION INSTRUCTIONS:First, press the INPUT KEY to switch to the “BT” Bluetooth Audio INPUT mode. Next, open the phone’s Bluetooth and search for the Bluetooth device. Click on the Bluetooth name “ZEB-INDIE” to connect.

Precaution

  1. Do not expose the product to high temperature, water, or moisture
  2. Do not empty to open or disassemble the product. You can get an electrical shock.
  3. The product should be opened by the Zebronics Authorised service personnel only else the warranty will be void.
  4. Please turn off the power and pull out the plug when the product is not in use.
  5. The USB connector can be used only for playing tracks stored from USB/SD. Charging for mobile or digital products is prohibited

ISO 9001:2015 Certified Companywww.zebronics.com

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

,