ZeFit 3HRQuick start guide
OVERVIEW
WAKE THE DEVICEDouble-tap the touchscreenZeFit 3HR screen turns off when not use
EXIT A MENUDouble-tap the touchscreen
MOVE BETWEEN SCREENS
Swipe left or right (horizontal mode) up or down (vertical mode)
To ensure ZeFit3HR is responding accurately to your taps, we recommend using your fingertip and not your nail.
CHARGING
Charge ZeFit for two hours before your first use.1. Put ZeFit 3HR on the magnetic charging dock2. Make sure the pin on the charging dock fit correctly onto the charging terminals on the back of ZeFit 3HR3. Plug the small end of the USB cable provided into the charging’s dock USB port4. Plug the big end of the USB cable into a power source5. A battery indicator will fill to indicate charging is in progress. Once ZeFit3HR is charged, the battery indicator will be fullA full charge takes 1:30 hour. When the battery level gets low, a battery indicator will appear.
PAIRING
The first time you use ZeFit 3HR, a SETUP message will prompt you to set up your ZeFit 3HR using a mobile device.
GET ZeFit3 APPTo set up your ZeFit3HR using your mobile device, you first need to get ZeFit3 App. Search for ZeFit App in the App Store, Google Play, or Windows Phone Store, download and install the App on your mobile device.
System Requirements
iOSiOS 8+ devices with Bluetooth 4.0 BLE iPhone 4s, 5, 5c, 5s, 6, 6 Plus and newer, iPad (3 rd , 4th, and 5th gen) iPad Mini, iPod touch (5 th gen)
AndroidSelect Android 4.3 + devices that support Bluetooth 4.0 BLE
Windows Phone 8.1+Select Windows Phone 8.1+ that support Bluetooth 4.0 BLEVisit www.mykronoz.com to get the latest compatibility list
1. Enable Bluetooth on your mobile device2. Open ZeFit App on your mobile device. Sign up if you are a new member or Log in with your existing account. After entering your personal information, tap Set up3. Make sure ZeFit3 in the list of devices 3HR is nearby and select ZeFit 3HR
If pairing fails, repeat the same steps. Pairing is a one-time process. If you want to pair ZeFit3HR with another account, you first need to unpair it from the current one. Open ZeFit3 App, go to Settings > Connect ZeFit3 > Unpair ZeFit 3 . Tap Connect ZeFit 3HR to pair a new device
TECH SPECS
Size & Circumference | 47.5 x 20 x 10.3 mm |
Min:159 mm | |
Max: 194 mm | |
Weight | 20 g |
Bluetooth | 4.0 BLE |
Bluetooth operating range | Up to 5 meters |
Battery type | Li-iOn 100 mAh |
Battery life | Up to 5 days |
Charging time | 1 to 2 hours |
Memory | 5 days of activity |
Display | TFT color touchscreen 1.06 inches/ 160*64 pixels |
Sensor | 3-axis accelerometer , optical HR sensor |
Operating temperature | -20°C to +40°C |
Water resistance | IP67 |
International warranty | 1 year |
SAFETY INSTRUCTIONS
Before using the device, read these instructions carefully.
- ZeFit3HR has one built-in battery. Do not disassemble the battery on your own. KRONOZ LLC is not responsible for any damage or personnel injury caused by the removal of the battery or any component.
- This device is not waterproof so keep it away from all sources of heat or humidity. Do not use it near sink or other wet areas. Do not immerse the product in any liquid other than water. Do not immerse the product in salt water. Do not swim wearing this product. Do not use the product underwater.
- Charge the battery in a cool, ventilated room. Excessive temperature during charging could cause heat, smoke, fir or deformation of the battery or even explosion.
- Avoid excessive temperatures. Do not expose this device to excessive smoke, dust sand, or direct sunlight for an extended period of time.
- Do not open, crush, bend, deform, puncture or shred secondary cells or batteries. In the event of a battery break or leak, prevent battery liquid contact with skin or eyes. If this happens, immediately flush the areas with water (do not rub the eye) or seek medical help.
- Do not short-circuit. Short-circuiting can occur when a metallic object, such as coins, causes direct connection of positive and negative terminals of the battery. Short-circuiting may damage the battery.
- Do not use batteries that have been damaged or have been exhausted.
- Keep the batteries out of children’s reach and in a safe place to prevent danger.
- Do not dispose of batteries in fire as they may cause explosion. Dispose of used batteries in accordance with your local regulations (such as recycling). Do not dispose as household waste.
- Use only the USB cable supplied to charge this battery. Do not charge fo more than 24 hours.
- KRONOZ LLC is not responsible for any damage caused by improper use of the device.
REGULATORY NOTICES
USA
- Reposition the receiving antenna
- Increase the distance between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
FCC ID: 2AA7D-ZEFT3H
CANADAINDUSTRY CANADA (IC) STATEMENTThis device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
EUROPEAN UNION
DISPOSAL AND RECYCLING INFORMATION
©2016 Kronoz LLC, all rights reserved. Kronoz LLC, Avenue Louis-Casaï 18, 1209 Geneva, SwitzerlandAll brands or product names are or may be trademarks of their respective owners.Pictures and specifications are not contractual.Les marques citées sont des marques déposées par leur fabricant respectif. Photos et caractéristiques non contractuelles. Designed in Switzerland – Made in China
SCAN FOR MORE LANGUAGES
OR VISIT https://www.mykronoz.com/supportTO DOWNLOAD OUR MULTI-LANGUAGE USER MANUAL
www.mykronoz.com© 2016 KRONOZ LLC.
References
[xyz-ips snippet=”download-snippet”]