ID Lock 150Zigbee ModuleUser Manual
1: Place the module in the slot(A) marked “Remote Control” after removing batteries.
Preparation
- Update ID Lock 150 with the ”Updater app”.The Zigbee module is compatible with lock firmware from v1.5.0.See idlock.no/updater for more information.
Add lock
- Open the door.
- Remove batteries.
- Place the module in the slot marked “Remote Control” (see illustration 1).
- Insert batteries.
- Activate “Add unit” in the app for your hub or scan the QR code.Please follow instructions from your hub manufacturer. Secure inclusion (QR code) may not be available on all hubs.
- The module is added by itself.
A blue LED flashes when the module synchronizes and is added.Sounds may be heard from the lock during the process.
Remove lock
- Open the door.
- Hold the key button until the panel is activated.
- Enter [Master PIN], followed by [*].
- Enter digit [2], followed by [*].
- Enter digit [0].
Manual sync
- Open the door.
- Hold the key button until the panel is activated.
- Enter [Master PIN], followed by [*].
- Enter digit [2], followed by [*].
- Enter digit [5]
Technical details .
Please refer to the next page for technical details and properties for the Zigbee module.
Warning!
The batteries must be removed when removing and placing the module in the ID Lock 150. If not, the module can take damage.
Basic cluster (0x0000)Attributes
| Identifier | Name | Type | Value |
| 0x0000 | ZCL version | INT8U (0x20) | 3 |
| 0x0001 | Application version | INT8U (0x20) | 2 |
| 0x0002 | Stack version | INT8U (0x20) | 65 |
| 0x0004 | Manufacturer name | ASCII_STR (0x42) | Datek |
| 0x0005 | Model identifier | ASCII_STR (0x42) | ID Lock 150 |
| 0x0007 | Power source | ENUM8 (0x30) | 3 |
| 0x4000 | Build id | ASCII_STR (0x42) | 0.7 |
| 0xfffd | Cluster revision | INT16U (0x21) | 1 |
Basic cluster (0x0000)Manufacturer specific attributes
| Identifier | Name | Type | Value |
| Ox5000 | Lock fw | ASCII_STR (0x42) | 1.5.0 |
Power Configuration cluster (0x0001)Attributes
| Identifier | Name | Type | Value |
| 0x0021 | Battery percentage | INT8U(0x20) | 45 |
| Oxfffd | Cluster revision | INT16U (0x21) | 1 |
Identity cluster (0x0003)Attributes
| Identifier | Name | Type | Value |
| Ox0000 | Identify time | INT16U (0x21) | 0 |
| Oxfffd | Cluster revision | INT16U (0x21) | 1 |
Commands0x00: Identify0x01: IdentifyQuery
Door lock cluster (0x0101)Manufacturer specific attributes
| Ident. | Name | Type | Value |
| 0x4000 | Master PINmode | BOOLEAN (0x10) | True: Master PIN unlock ENABLEDFalse: Master PIN unlock DISABLED |
| 0x4001 | RFID enabled | BOOLEAN (0x10) | True: RFID ENABLED False: RFID DISABLED |
| 0x4002 | Hingemode | BOOLEAN (0x10) | False: Right hinged door True: Left hinged door |
| 0x4003 | Service PINmode | INT8U (0x20) | 0: Deactivated (default)1:lx use2:2x uses3:5x uses4:10x uses5:Random PIN lx use6:Random PIN 24 hours7:Always valid8:12 hours9:24 hours |
| 0x4004 | Lock mode | INT8U (0x20) | 0: Auto lock OFF/Away mode OFF1:Auto lock ON/Away mode OFF2:Auto lock OFF/Away mode ON3:Auto lock ON/Away mode ON |
| 0x4005 | Relock enabled | BOOLEAN (0x10) | True: ReLock ON False: ReLock OFF |
| 0x4006 | Audio volume | INT8U (0x20) | 0: Volume off1-5: Volume level 5: Default |
Note! Service PIN mode 5 and 6 returns a random generated PIN and mode 1 or 9. Available from firmware 1.5.5.
Door lock cluster (0x0101)Attributes
| Ident. | Name | Type | Value |
| 0x0000 | Lock state | ENUM8 (0x30) | Ox00: not fully lockedOx1:lockedOx2:unlocked Oxff: undefined |
| 0x0001 | Lock type | ENUM8 (0x30) | Ox00 (deadbolt) |
| 0x0002 | Actuator enabled | BOOLEAN (0x10) | False |
| 0x0003 | Door state | ENUM8 (0x30) | Ox00: openOx01: closed0x02: error jammed0x03: error forced open Chid*: error unspecified Oxff: undefined |
| 0x0012 | Num PIN users | INT16U (0x21) | 25 |
| 0x0013 | Num RFID users | IN716U (0xl) | 25 |
| 0x0017 | Max pin length | IN78U(0x20) | 10 |
| 0x0018 | Min pin length | IN78U(0x20) | 4 |
| 0x0024 | Sound volume | INT8U(0x20) | 0x00: Silent 0x01: Low 0x02: High |
| 0x0033 | Require PIN for RFoperation | BOOLEAN (0x10) | 0xffff |
| 0x0041 | Keypad operation event mask | BITMAP16 (0x19) | 0xffff |
| 0x0042 | RF operation event mask | BITMAP16 (0x19) | 0xffff |
| 0x0043 | Manual operation event mask | BITMAP16 (0x19) | 0xffff |
| 0x0044 | RFIDoperation event mask | BITMAP16 (0x19) | 0xffff |
| 0x0045 | Keypad programming event mask | BITMAP16 (0x19) | 0xffff |
| 0x0046 | RF programming event mask | BITMAP16 (0x19) | 0xffif |
| 0x0047 | RFID programming event mask | BITMAP16 (0x19) | 0xffif |
| 0xfffd | Cluster revision | INT16U(0x21) | 1 |
Commands
0x00: Lock Door0x01: Unlock Door0x05: Set PIN0x06: Get PIN0x07: Clear PIN0x08: Clear all PINs
Revision: 0.4Approved date: 2020-11-24Approved by: ALRLanguage: Englishidlock.no/zigbee
References
[xyz-ips snippet=”download-snippet”]