ZOOM BTA-2 Bluetooth Adapter for PodTrak Series User Guide
Connecting a BTA-2 (dedicated wireless adapter)
By connecting a BTA-2, audio can be input through the smartphone connection jack via Bluetooth. LED Pairing switch.
Connecting
Pairing must be conducted the first time connecting.
- While the P4 power is off, connect the BTA-2 to the smartphone connection jack and the BTA-2 power supply connector.
- Turn the P4 power on ( “Turning the power on” on page 16).The LED lights white when power is being supplied to the BTA-2. If a smartphone has already been paired, it will automatically be connected at this time.
- Press and hold the pairing switch until the BTA-2 LED blinks white.This puts the BTA-2 into connection standby.
- Conduct connection procedures on the smartphone.The LED will light blue when connection completes.
NOTE When connecting to a smartphone using a BTA-2, set INPUT SELECT switch 3 to 
.
Disconnecting
- Conduct disconnection procedures on the smartphone.This disconnects it.
- The P4 power should be off when disconnecting a BTA-2.
[xyz-ips snippet=”download-snippet”]