HIKVISION Indoor Station Touch Screen WiFi Installation Guide

HIKVISION Indoor Station Touch Screen WiFi Installation Guide

Symbol Conventions

The symbols that may be found in this document are defined as follows.

  Symbol   Description
 Danger   Indicates a hazardous situation which, if not avoided, will or could result in death or        serious injury.
 Caution   Indicates a potentially hazardous situation which, if not avoided, could result in                equipment damage, data loss, performance degradation, or unexpected results.
 Note   Provides additional information to emphasize or supplement important points of the       main text.

1 About this Manual

Get the manual and related software from or the official website (http:// www.hikvision.com).

  Product  Model
  Network Indoor Station   DS-KH8350-WTE1,DS-KH8350-TE1

Scan the QR code to get the                      Scan the QR code to get the operationconfiguration guide for detailed                  guide for detailed information.information.

2 Appearance

Front Panel

Rear Panel

 Figure 2-2 Rear Panel

Network Indoor Station Installation Guide

Note

  • The Unlock key is valid only when does the indoor station speak with the door station or open the live view of the door station.
  •  You can not use the debugging terminal.

3 Typical Application

4 Wiring Description

There are 20 pins in the terminal on the rear panel of the indoor station: 2 RS-485 pins, 2 power pins, 2 GND pins, 2 alarm output pins, 8 alarm input pins, and 4reserved pins.

5 Installation

It supports wall mounting. There are two installation modes.

5.1 Installation Accessory Description

The wall mounting plate is required when installing the indoor station on the wall. The dimension of wall mounting plate is shown below.

               Figure 5-1 Wall Mounting Plate

5.2 Wall Mounting

Before You Start

  • Make sure the device in the package is in good condition and all the assembly parts are included.
  • The power supply the indoor station supports is 12 VDC. Please make sure your power supply matches your indoor station.
  • Make sure all related equipments are power-off during the installation.
  • Check the product specification for the installation environment.

Steps

  1. Fix the wall mounting plate to the wall with 2 supplied screws.
  2. Put the indoor station on the holder of the wall mounting plate.Figure 5-2 Installing the Plate

Read More About This Manual & Download PDF:

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

,