SOUND ACTIVATED LED LIGHTSFANTASTIC COMPLEMENT TO TV’S & HOME DECOR
Package Contents:6.6 ft LED RGB StripUSB LED Controller Manual
INSTALLATION:
- Clean the surface you intend to stick the Sound Activated LED Lights too.
- Peel off the backing strip of the 3M adhesive tape (Be careful to peel off only the backing and not the adhesive).
- Press and hold the Sound Activated LED Strip firmly against the surface.
- Connect the USB cable to the USB port on a TV or a USB wall charger (1A charger required — not included).
- For optimal performance: Place the IR receiver in a location away from the IR receiver on the TV to avoid interference from the TV remote control.
OPERATION:
- Turn on the LED light by pushing the ON button on the remote control.
- Select the desired color or the desired effect and push the corresponding button on the remote control.
- Set the desired color brightness using the buttons to increase/ decrease the intensity of the color.
- Push the OFF button to turn off the LED light.
CHANGING REMOTE CONTROL BATTERY:
The battery for the remote control has already been installed. Remove the battery pull tab to operate.
- The battery compartment is located on the narrow side of the remote control.
- Remove the empty battery and insert a 3V battery, type CR2025. The positive terminal must point upwards.
- Place the battery compartment back in the remote control so it locks in place.
ONE YEAR WARRANTY
Xtreme warrants its products for ONE YEAR against defects in manufacturing under regular consumer use with the original receipt of retail purchase.We believe in our products and want to provide you with a replacement if needed, only in which the product is still under warranty. If you discover a defect covered by this warranty, please contact us about receiving a replacement.
*Any customers outside of the U.S. will be responsible for shipping and handling charges if a replacement is required that is not due to a manufacturing defect. If there is not a manufacturing defect, shipping and handling will be applied.
Xtreme’s warranty is limited to our products only. Our warranty does not cover the replacement or repair cost of any third-party accessory, electronic device, or personal property.For more details on what is not covered under warranty, please go to www.xtremecables.com/oneyearwarranty.aspxFor instructions about how to obtain warranty service for your product, please contact Customer Service at [email protected]
Technical Data:Voltage Supply:LED Strips (USB) 5VRemote Control 3V (1 x 3V battery, type CR2025)Output: 2.5W855-999-8041 www.xtremecables.com
[xyz-ips snippet=”download-snippet”]