TELTONIKA RUT240 4G LTE WiFi Router User Guide

RUT240Quick Start Guide v2.2

FRONT VIEW

BACK VIEW

POWER SOCKET PINOUT

HARDWARE INSTALLATION

  1. Push the SIM holder button with the SIM needle.
  2. Pull out the SIM holder.
  3. Insert your SIM card into the SIM holder.
  4. Slide the SIM holder back into the router.
  5. Attach all antennas.
  6. Connect the power adapter to the socket on the front of the device. Then plug the other end of the power adapter into a power outlet.
  7. Connect to the device wirelessly using SSID and password provided on the device information label or use anEthernet cable connected to LAN port.

LOGIN TO DEVICE

  1. To enter the router’s Web interface (WebUI), type http://192.168.1.1 into the URL field of your Internet browser.
  2. Use login information shown in image A when prompted for authentication.
  3. After you log in, you will be prompted to change your password for security reasons. The new password mustcontain at least 8 characters, including at least one uppercase letter, one lowercase letter, and one digit. This step is mandatory and you will not be able to interact with the router’s WebUI before you change the password.
  4.  When you change the router’s password, the Configuration Wizard will start. The Configuration Wizard is a tool used to set up some of the router’s main operating parameters.
  5. Go to the Overview page and pay attention to the Signal Strength indication (image B). To maximize the cellular performance try adjusting the antennas or changing the location of your device to achieve the best signal conditions.

TECHNICAL INFORMATION

Radio specifications
RF technologies 2G, 3G, 4G, Win
Max RF power 33 , 24 , 23 , 20 VViR

Bundled accessories specifications*
Power adapter Input , Output 9VDC, 1A, 4-pin plug
Mobile antenna 698-960/1710-2690 MHz, 500, VSWR<3, gain** 3 dBi, omnidirectional, SMA male connector
Win antenna 2400-2483.5 MHz, 500, VSWR<2, gain** 5 dBi, omnidirectional, RP-SMA male connector

SAFETY INFORMATION

Hereby, TELTONIKA declares that this RUT240 is in compliance with the essential requirements and other relevant provisions ofDirective CE/RED.

The full text of the EU declaration of conformity is available at the followingInternet address: https://wiki.teltonika-networks.com/view/RUT240_CE/RED

Instruction Manual: Connect the power adapter to turn on the device. Open 192.168.1.1 in your web browser to configure it. More information on https://wiki.teltonika-networks.com/

For more information visit www.teltonika-networks.com

wiki knowledge basehttps://wiki.teltonika-networks.com/

report this ad

This sign means that all used electronic andelectric equipment should not be mixed with general household waste. This sign means that the product meets the requirements of the applicable EU directives.

www.teltonika-networks.com©2021 Teltonika Networks

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, , ,