tp-link Wireless 4G LTE Telephony Router Installation Guide

tp-link Wireless 4G LTE Telephony 
Router Installation Guide

1. Connect the Hardware

a. Install the antennas and position them upwards.b. With the gold contacts facing down, insert the Nano SIM card into the slot until you hear a click.

2. Verify the Hardware Connection

Check the following LEDs’ status. If the Internet LED is on, your router is connected to the internet successfully.

Note: If the Internet LED does not turn on, please refer to Need Help? > Q2 on the back page.

For better internet connection, make sure 2 or 3 bars of the Signal Strength LED are lit. Otherwise, try relocating the router to a spot that may receive a stronger mobile network signal, such as near a window.

3. Enjoy the Internet

  • WiredConnect your computer to the router’s LAN port via an Ethernet cable.
  • Wireless 

a. Find the SSID (network name) and wireless password printed on the label at the bottom of the router.Note: For a dual-band router, you can find two default SSIDs. Choose one to join the Wi-Fi.

b. Click the network icon of your computer or go to Wi-Fi settings of your smart device, and then select the SSID to join the network.

4. Customize the 4G LTE Router

  1. Make sure your computer is connected to the router (wired or wireless).
  2. Launch a web browser and type in http://tplinkmodem.net orhttp://192.168.1.1. Create a new password for future logins. Note: If the login page does not appear, please refer to Q1 of Need Help? in this guide. http://tplinkmodem.net
  3. Follow the step-by-step instructions of the Quick Setup to complete the initial configuration.

Note: The router can also be used (or configured) in Wireless Router Mode for DSL/Cable connections. For more advanced configurations, please refer to the user guide on TP-Link official website at www.tp-link.com.

Configure Telephony SettingsBy default, the router uses traditional voice services over 3G network.

  • To make / receive voice calls over LTE network (Volte)a. Launch a web browser, log in to the web management page athttp://tplinkmodem.net.b. Go to Advanced > Telephony > Telephony Mode, Select VoLTE.c. In VoLTE section, toggle on this feature and click Save.
  •  To make / receive voice calls over internet (VoIP)a. Launch a web browser, log in to the web management page athttp://tplinkmodem.net.b. Go to Advanced > Telephony > Telephony Mode, Select VoIP. c. In VoIP section, click Add to enter your telephone information and click Save.Note: If your telephony provider is not listed in Telephony Provider, select Other then contact your carrier to get the necessary information.

Note: To use this feature, your carrier must also support VoLTE calls. If you are not sure about it, contact your carrier for help.

Configure the router via Tether App

The TP-Link Tether provides a simple, intuitive way to access and manage your router.

How to begin?

  1. Download the TP-Link Tether app.

    https://www.tp-link.com/app/qrcode/?app=tether

  2. Open the Tether app and log in with your TP-Link ID. Note: If you don’t have an account, create one first.
  3. Tap the button in the Tether app and select Router > 3G/4G Router. Follow the steps to complete the setup and connect to the internet.

LED Indicators

Need Help?Q1. What should I do if I cannot access the web management page? 

  • If the computer is set to a static IP address, change its settings to obtain an IP address automatically.
  • Make sure http://tplinkmodem.net or http://192.168.1.1 is correctly entered in the web browser.
  • Use another web browser and try again.
  • Reboot your router and try again.
  • Disable and enable the active network adapter in use.

Q2. What should I do if I cannot access the internet?

  • Verify that your SIM card is an LTE or WCDMA card.
  •  Verify that your SIM card is in your internet service provider’s service area.
  • Verify that your SIM card has sufficient credit.
  • Launch a web browser, log in to the web management page, and check the following:
  1. Go to Advanced > Network > Internet to verify the parameters provided by your ISP are correctly entered. If the parameters are incorrect, click Create Profile and enter the correct parameters, then select the new profile from the Profile Name list.
  2. Go to Advanced > Network > PIN Management to verify if PIN is required. If it is, enter the correct PIN provided by your ISP, and click Save.
  3. Go to Advanced > Network > Data Settings to verify if the Total/Monthly Used exceeds the Total/Monthly Allowance. If it does, click Correct and set Total/Monthly Used to 0 (zero), or disable Data Limit.
  4. Go to Advanced > Network > Internet to verify that Mobile Data is enabled. If it is not, enable it to access the internet.
  5. Confirm with your ISP if you are in a roaming service area. If you are, go to Advanced > Network > Internet to enable Data Roaming.

Q3. How do I restore the router to its factory default settings?

  • With the router powered on, press and hold the WPS/RESET button on the rear panel of the router until the Power LED starts flashing, then release the button. Wait while the router resets.
  • Log in to the web management page of the router, and go to Advanced > System Tools > Backup & Restore, click Factory Restore and wait until the reset process is complete.

Q4. What should I do if I forget my web management page password?

  • Refer to Q3 to reset the router, then create a new password to log in.

Q5. What should I do if I forget my wireless network password? 

  • The default wireless password is printed on the product label of the router.
  • Connect a computer directly to the router using an Ethernet cable. Log in to the router’s web management page and go to Basic > Wireless to retrieve or reset your wireless password.

Safety Information

  • Keep the device away from water, fire, humidity or hot environments.
  • Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us
  • Do not use damaged charger or USB cable to charge the device.
  • Do not use any other chargers than those recommended.
  • Do not use the device where wireless devices are not allowed.
  • Adapter shall be installed near the equipment and shall be easily accessible.
report this ad

For technical support, the user guide and other information, visit https://www.tp-link.com/support.

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, , , , ,