22″ Wide Screen HD LED TV with DVD PLAYER TVD1805-13
132.23″ WWIIDDEESSCCRREEENENHDHDLELDETDVTV WWIITTHH DDVVDD PPLLAAYYEERRMMODOEDLELNNOO.::TTVV1D80158-0252-13
Connecting DVD Player/Set-Top Box
HDMI input One YPbPr input
One HDMI input
DVD
1. EJECT ( )
Press the EJECT button to eject/enter a disc when
POWER
MUTE
power is on.
GOTO ANGLE A-B
1
3
2. GOTO
2
4
Press GOTO button to go to desired position. The
1
2
3
EPG
player provides 3 searching mode.
4
5
6
INFO
7
8
9 FREEZE
0
SLEEP
SOURCE MENU
OK
ASPECT EXIT
3. A-B
Press A-B button once to set point A; press it again
to set point B. Then A-B repeat playing is enabled.
And press this button for the third time to cancel
repeat playing.
5
7
4. ANGLE (DVD ONLY)
8
Some DVDs may contain scenes which have been 10
shot simultaneously from a number of different
angles. For these discs, the same scene can be
viewed from each of these different angles using 11
the ANGLE button.
12
5. REPEAT Press REPEAT button repeatedly to change the repeat mode.
PICTURE
VOL
SOUND
CH
MEDIA
6CC MTS/AUDIO C.LIST
REPEAT LANGUAGE D.MENU
9
F.LIST SETUP
FAVO SUBTITLE
AUTO
TITLE
ZOOM
D.DISP
13
6. MEDIA Press MEDIA button repeatedly to switch the unit among DISC, USB and CARD mode.
7. LANGUAGE Press LANGUAGE button to change the soundtrack language of your disc, which supports multiple soundtrack languages.
8. SETUP Press SETUP button to enter DVD menu setting page and press it again to dismiss it.
9. D.MENU Press D.MENU button and the screen will display the root menu if your disc supports multilayer menu; press it to turn on/off PBC when playing a VCD 2.0 disc.10. SUBTITLE Press SUBTITLE button to change availabel subtitle language of your disc, which supports multiple subtitle languages.11. ZOOM Press ZOOM button repeatedly to enlarge/shrink the picture.12. TITLE Press TITLE button to display the title menu of your disc.13. D.DISP Press D.DISP button to display playback information.
Multimedia
1. / (FB/FF) Press / button to play fast backward/forward.
CC MTS/AUDIO C.LIST
REPEAT LANGUAGE D.MENU
F.LIST
FAVO
AUTO
SETUP SUBTITLE
2.
/ (PREVIOUS/NEXT)
Press / button to play previous/next file.
3
1
3. (PLAY/PAUSE) Press button to start/pause playing.
4
2
TITLE
ZOOM
D.DISP
4. (STOP) Press button to stop playing.
POWER
INPUT
USB1
DC 12V
HDMI
VGA
Y PC AUDIO
Pb
Pr
IN
RF EARPHONE
POWER
INPUT
USB1
DC 12V
HDMI
VGA
Y PC AUDIO
Pb
Pr
IN
RF EARPHONE
POWER
INPUT
USB1
DC 12V
HDMI
VGA
Y PC AUDIO
Pb
Pr
IN
RF EARPHONE
INPUT SOURCETV AV YPbPr HDMI VGA USB DVD
8. OverScan (HDMI mode only) Turn on/off OverScan if Users found the image wasn’t fully displayed on screen.9. Restore Default This item is used to reset to factory default settings.
CHANNEL
Press SETUP button on remote control. Use the navigation buttons to select preferred item, and press OK button, each screen for setting the value is displayed. Then move the navigation buttons to set the item and press OK button to confirm the settings. Press SETUP button to close setup menu. Use LEFT or RIGHT navigation button to switch to another main setup item. Then press RIGHT or OK button to enter submenu page; press LEFT button to return to previous menu page.
–GENERAL SETUP PAGE–
TV DISPLAY ANGLE MARK OSD LANG CAPTIONS SCREEN SAVER DEFAULT
WIDE ON ENG OFF ON
GOTO GENERAL SETUP PAGE
USB 2/SD OPERATIONCard Reader and USB Player (USB 2) The card reader can read 3 kinds of cards (SD/MMC/MS) and USB 2 can read USB storage. To access USB 2 device or SD/MMC/MS card, please insert the device in the slot as shown in this illustration.Press the SOURCE button on the remote control. Use the navigation buttons to select DVD!, and press the OK button. (DVD player, USB 2 device and SD/MMC/MS card all use DVD! as source.) Press the SOUND/MEDIA button to toggle between accessing the DVD player, USB 2 device, or SD/MMC/MS card.USB 2
–AUDIO SETUP PAGE-SPEAKER SETUPGOTO AUDIO SETUP PAGE
This product is a high resolution LED display device and a few cell defects can occur in the manufacture of the LED. Several colored dots visible on the screen would be acceptable in line with other LED manufacturers and would not mean that the LED is faulty. We hope you will understand that it could not be changed or refunded.
8. OverScan (HDMI mode only) Turn on/off OverScan if Users found the image wasn’t fully displayed on screen.9. Restore Default This item is used to reset to factory default settings.
CHANNEL
Press SETUP button on remote control. Use the navigation buttons to select preferred item, and press OK button, each screen for setting the value is displayed. Then move the navigation buttons to set the item and press OK button to confirm the settings. Press SETUP button to close setup menu. Use LEFT or RIGHT navigation button to switch to another main setup item. Then press RIGHT or OK button to enter submenu page; press LEFT button to return to previous menu page.
–GENERAL SETUP PAGE–
TV DISPLAY ANGLE MARK OSD LANG CAPTIONS SCREEN SAVER DEFAULT
WIDE ON ENG OFF ON
GOTO GENERAL SETUP PAGE
USB 2/SD OPERATIONCard Reader and USB Player (USB 2) The card reader can read 3 kinds of cards (SD/MMC/MS) and USB 2 can read USB storage. To access USB 2 device or SD/MMC/MS card, please insert the device in the slot as shown in this illustration.Press the SOURCE button on the remote control. Use the navigation buttons to select DVD!, and press the OK button. (DVD player, USB 2 device and SD/MMC/MS card all use DVD! as source.) Press the SOUND/MEDIA button to toggle between accessing the DVD player, USB 2 device, or SD/MMC/MS card.USB 2
–AUDIO SETUP PAGE-SPEAKER SETUPGOTO AUDIO SETUP PAGE
This product is a high resolution LED display device and a few cell defects can occur in the manufacture of the LED. Several colored dots visible on the screen would be acceptable in line with other LED manufacturers and would not mean that the LED is faulty. We hope you will understand that it could not be changed or refunded.
[xyz-ips snippet=”download-snippet”]