belkin AX1800 Dual-Band Gigabit WiFi 6 Router RT1800 User Guide

belkin AX1800 Dual-Band Gigabit WiFi 6 Router RT1800

Product Overview

Front

Power light-Blinks white while router is starting up and during WPS pairing. Blinks yellow if WPS pairing fails Internet status light–Is solid white when connected to the internet and solid yellow when not connected.

Back

Wi-Fi Protected Setup™ (WPS) button (1)—- Press to easily configure wireless security on Wi-Fi Protected Setup-enabled network devices. The light under the button will blink while WPS pairing is active.Reset button (2)–Press and hold for until the power LED starts flashing to reset the router to factory settings.Ethernet ports (3)——Connect Ethernet cables (also called network or internet cables) to these Fast Ethernet (10/100/1000) ports and to other wired devices on your network. The lights under the ports will light up only when an Ethernet cable is plugged in and there is data traffic on the cable.Internet port (4)—— Connect an Ethernet cable to this port and to your modem. The light under the port will light up only when an Ethernet cable is plugged in and there is data traffic on the cable.USB 3.0 port (5)—- Connect and share a USB drive on your network.Power port (6)—— Connect the included AC power adapter to this port.Power switch (7) —- Press | (ON) to turn on the router.

Setting Up: Basics

Where to find more help

In addition to this user guide, you can find help at Belkin.com/support/RT1800 (documentation, downloads, FAQs, technical support, live chat, forums)Note–Licenses and notices for third party software used in this product may be viewed on https://www.belkin.com/support/license/. Please contact https://www.belkin.com/support/gplcodecenter/ for questions or GPL source code requests.

How to install your router
  1.  If replacing an existing router, disconnect that router first.
  2. Plug in the router to a power source. Make sure the power switch is in the | (ON) position.
  3. Connect your new router to your modem or modem-router.

    A Modem

    OR

    B Modem-Router
    Plug one end of the included ethernet cable into the yellow Internet port on your new router. If you have a modem, plug the other end into the Ethernet (LAN) port on the modem. Plug one end of the included ethernet cable to the yellow Internet port on your new router. If you have a modem-router, plug the other end into any available port.
  4. Connect to the network name shown in the Quick Start Guide that came with your router. (You can change the network name and password later.) Select the option to automatically connect to this network in the future. If you need help connecting to the network refer to your device documentation on the provided CD.Note–You will not have internet access until router setup is complete.
  5. Enter http://myrouter.local in a web browser. Follow the on-screen instructions to complete setup. You also can enter 192.168.1.1 in a browser to start setup
  6. Once you are finished with setup, please be sure to register your router so we can keep you informed security updates, product recalls and other things that will improve your experience.

Advanced Configuration

How to open the browser-based utility

To access some advanced settings, you need to open the browser-based utility. Make sure you are connected to the router, open a web browser and enter http://myrouter.local in a web browser or go to 192.168.1.1.

The router will prompt you for a password.If you changed the password during setup, enter the new password. Click LOGIN. If you didn’t change the password, or skipped setup altogether, the default password is “admin”.

Basic Router Settings

This screen allows you to change the router’s basic configuration.

Language

Select your language–To change language, select one from the drop-down menu. The language of the browser-based utility will change within five seconds.

Internet Setup

The Internet Setup section configures the router to your internet connection. This information can be provided by your Internet Service Provider (ISP).Internet Connection Type–Select the type of internet connection your ISP provides from the dropdown menu.

  • Automatic Configuration ­ DHCP (default) Keep the default only if your ISP supports DHCP or if you connect using a dynamic IP address. (This option usually applies to cable connections.)
  • Static IPSelect if you are required to use a fixed IP address to connect to the internet.
  • PPPoESelect if you have a DSL connection and your ISP uses Point-to-Point Protocol over Ethernet (PPPoE).
  • PPTPPoint-to-Point Tunneling Protocol (PPTP) is a service that generally applies to connections in Europe. If your PPTP connection supports DHCP or a dynamic IP address, select Obtain an IP Address Automatically. If you are required to use a fixed IP address to connect to the internet, select Specify an IP Address and configure the options that appear.
  • L2TPLayer 2 Tunneling Protocol (L2TP) is a service that generally applies to connections in Israel.Note– Connect on Demand or Keep Alive are options when choosing PPPoE, PPTP and L2TP. They let you choose whether the router connects to the internet only as needed (useful if your ISP charges for connect time), or if the router should always be connected. Select the appropriate option.
  • Bridge ModeBridge Mode disables all router capabilities and turns the router into an access point. The router will cease to act as a DHCP server and its built-in firewall as well as the NAT features will no longer be in effect.
  • Wireless BridgeA wireless bridge wirelessly connects to your main router and can share the internet connection with devices connected to the bridge’s Ethernet ports.
Basic Wireless Settings

Network Mode—-Select the wireless standards your network will support.

  • Mixed (default) Keep the default if you have Wireless-N (2 4 GHz), Wireless-G, Wireless-B, Wireless-AX devices in your network.
  • Wireless-A Only Select if you have only Wireless-A devices.
  • Wireless-N Only Select if you have only Wireless-N (2.4 GHz) devices.
  • Disabled Select if you have no Wireless-B, Wireless-G, and Wireless-N (2.4 GHz) devices in your network.Note– You may select Mixed, Wireless-A/N Only or Disabled for the 5 GHz band. If you are not sure which mode to select, keep the default, Mixed.

Network Name (SSID)The Service Set Identifier (SSID) is a name used by devices to connect to a wireless network. SSIDs are case-sensitive and must not exceed 32 characters. The default SSIDs for the 2.4 GHz and 5 GHz networks are Belkin XXXXX and BelkinXXXXX_5GHz, respectively. The Xs represent the last five digits of the router’s serial number, which can be found on the bottom of the router. If you changed the SSID, both bands have the new SSIDs. You may give them different names through the browser based utility.

Note– If you restore the router’s factory default settings (by pressing the Reset button or using the Administration > Factory Defaults screen), the Network Name will return to its default value. Change the Network Name back to its original name, or you will have to reconnect all devices on your wireless network to the new network name.

Channel WidthKeep the default, Auto (20 MHz or 40 MHz), for best performance in a 2.4 GHz network using Wireless-B, Wireless-G and Wireless-N (2.4 GHz) devices. For a channel width of 20 MHz, select 20 MHz only. For the best performance in a 5 GHz network, keep the default 20, 40 or 80 MHz.

ChannelSelect the channel from the drop-down list. Keep the default, Auto, if you are not sure which channel to select.SSID BroadcastKeep the default, Enabled, to broadcast the router’s SSID. When wireless clients survey the local area for wireless networks to associate with they will detect the SSID broadcast by the router. Attempting to hide your Wi-Fi name does not make your Wi-Fi more secure. Anyone truly interested in accessing your network can find it even if you turn off this feature. If you still do not want to broadcast the router’s SSID, select Disabled.

Wireless Security

The router offers the following wireless security options: WPA3 Personal / WPA2 Personal / WPA2 Enterprise (WPA stands for Wi-Fi Protected Access.)

Security Option

Strength
WPA3 Personal Strongest
WPA3/WPA2 Personal
WPA2 Personal
WPA2 Enterprise
Security Option Settings

WPA2 Personal

If you select WPA2 Personal, each device in your wireless network MUST use WPA2 Personal and the same passphrase.

Passphrase—- Enter a passphrase of 8-63 characters. This is the Wi-Fi password that provides access to the network. It can be the same as entered in setup.

Disabled

If you choose to disable wireless security, you will be informed that wireless security is disabled when you first attempt to access the internet. You will be given the option to enable wireless security, or confirm that you understand the risks but still wish to proceed without wireless security.

Troubleshooting

You can find more help from our award-winning customer support atv Belkin.com/support/RT1800.

Your router was not successfully set up

If you could not complete setup in the browser-based interface, you can try the following:

  •  Press and hold the Reset button on your router with a paperclip or pin until the power light on the front of the router turns off and starts blinking (about 10 seconds). Type 192.168.1.1 in a browser to try setup again.
  • Temporarily disable your computer’s firewall (see the security software’s instructions for help). Install the router again.
  • If you have another computer, use that computer to install the router.
Your Internet cable is not plugged in message

If you get a “Your Internet cable is not plugged in” message when trying to set up your router:

  • Make sure that an ethernet or internet cable (or a cable like the one supplied with your router) is securely connected to the yellow Internet port on the back of the router and to the appropriate port on your modem. This port on the modem is usually labeled Ethernet.
  • Make sure that your modem is connected to power and is turned on.
  • If your computer was previously connected to your modem with a USB cable, disconnect the USB cable.
  • Install the router again.
Cannot access your router message

To access your router, you must be connected to your own network. If you currently have wireless internet access, the problem may be that you have accidentally connected to a different wireless network.To fix the problem on Windows computers, do the following*:

  1. On your Windows desktop, click on the wireless icon in the system tray. A list of available networks will appear.
  2. Click your own network name. Click Connect. In the example below, the computer was connected to another wireless network named wraith_5GHz. The wireless network name of the Belkin RT series router, Damaged_Beez2.4 in this example, is shown selected.
  3. If you are prompted to enter a network security key, type your password (security key) into the network security key field. Click OK.
  4. Your computer will connect to the network, and you should be able to access the router. *Depending on your version of Windows, there could be some differences in wording or icons in these steps.

To fix the problem on Mac computers, do the following:

  1. In the menu bar across the top of the screen, click the Wi-Fi icon. A list of wireless networks will appear.
  2. In the example below, the computer was connected to another wireless network named wraith_5GHz. The wireless network name of the Belkin RT series router, Damaged_Beez2.4 in this example, is shown selected.
  3. Click the wireless network name of your Belkin RT series router (Damaged_Beez2.4 in the example).
  4. Type your wireless network password (Security Key) into the Password field. Click OK.
After setup

The internet appears to be unavailableIf the internet has difficulty communicating with your router, the problem may appear as a “Cannot find [internet address]” message in your web browser. If you know that the internet address is correct, and if you’ve tried several valid internet addresses with the same result, the message could mean that there’s a problem with your ISP or modem communicating with your router. Try the following:

  • Make sure that the network and power cables are securely connected.
  • Make sure that the power outlet that your router is connected to has power.
  • Reboot your router.
  • Contact your ISP and ask about outages in your area.
report this ad

The most common method of troubleshooting your router is to turn it off, then back on again. Your router can then reload its custom settings, and other devices (such as the modem) will be able to rediscover the router and communicate with it. This process is called rebooting. To restart your router using the power cord, do the following:

  1. Disconnect the power cord from the router and the modem.
  2. Wait 10 seconds and reconnect the power cord to the modem. Make sure it has power.
  3. Wait until the modem’s online indicator has stopped blinking (about two caminutes). Reconnect the power cord to the router.
  4. Wait until the flashing green LED between the Reset button and power port is solid. Wait twominutes before trying to connect to the internet from a computer.

Specifications

Belkin RT1800
Model Name AX1800 Dual-Band Gigabit WiFi 6 Router
Model Number RT1800
Switch Port Speed 10/100/1000Mbps (Fast Ethernet)
Radio Frequency 2.4 GHz and 5 GHz
# of Antennas 4internal
Ports Ethernet (1-4), Internet, Power, USB 3.0
Buttons Wi-Fi Protected Setup, Reset, Power Switch
LEDs Power, Internet, Ethernet (1-4)
UPnP Power, Internet, Ethernet (1-4)
Security Features WPA2 Personal, WPA3 Personal, WPA2/WPA3 Mixed Personal
Security Key Bits Up to 128-bit encryption
Environmental
Dimensions 156mm (L) x 77.11mm (W) x 220mm (H)
Unit Weight 850g
Power 12V, 2A
Certifications FCC, CE, Wi-Fi (IEEE 802.11 a/b/g/n/ac/ax)
Operating Temperature 32° to 104°F (0° to 40°C)
Storage Temperature -4° to 140°F (-20° to 60°C)
Operating Humidity 10% to 80% relative humidity, non-condensing
Storage Humidity 5% to 90% non-condensing

BELKIN, LINKSYS and many product names and logos are trademarks of the Belkin group of companies. Third-party trademarks mentioned are the property of their respective owners. Licenses and notices for third party software used in this product may be viewed here: http://support.belkin.com/en-us/license. Please contact http://support.belkin.com/enus/gplcodecenter for questions or GPL source code requests. © 2020 Belkin International, Inc. and/or its affiliates. All rights reserved.

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, , , , , ,