S40Wireless Active Noise Cancelling HeadphonesUser Manual
Safety Instructions
Hearing Safety:
- To avoid hearing damage, please do not listen for a long time at a high volume.
- Please cautiously use or stop using in potentially dangerous situations.
- Do not use headphones while driving.
- For your safety, please do not turn the volume too high while running outside, so that you can hear your surroundings.
Operation Safety:
- Avoid dropping.
- Do not disassemble.
- Keep away from children to avoid danger from improper use.
- Do not submerge in water.
- Do not use the device outdoor during thunderstorms.
- Avoid operating in extreme temperatures, please use the device within its operation temperature: -15°C (5°F)~55°C (131°F).
- Use original or certified cables to charge.
- Do not use any corrosive cleaner/oil to clean the headphones.
What’s in the box?
WARNING
The in-flight plug adaptor lets you enjoy the balanced sound from the in-flight entertainment system while traveling in a plane.
The In-flight adaptor is NOT MEANT to charge your device. Plugging the in-flight adaptor into an AC Power Socket to charge the headphones will cause severe damage to the device.
At a Glance
How to use?
|
Hold Multi-function Button for 3 seconds to turn on theheadphones, and then the device enters the pairing mode.(Indication light turns blue) |
|
Hold Multi-function Button for 3 seconds to turn off theheadphones. |
 |
Press to adjust the volume. Long press to skip tonext/previous song. |
|
Press and hold the volume up and down buttonssimultaneously for 5 seconds to clear the Bluetooth pairingrecord. |
 |
Press Multi-function Button to play/pause music. |
 |
Hold the ANC button for one second to turn on/off ActiveNoising canceling (Indication light turns green) |
|
Press Multi-function Button to answer/end call. |
 |
Press Multi-function Button to reject the coming call |
 |
Double press Multi-function Button to reject coming call /activate the Siri voice control function. |
Functions
Easy Pairing
- Hold Power Button for 3 seconds to turn on the headphones, and then the device enters pairing mode.
- Keep the headphones and your Bluetooth device as close as possible during the pairing process.
- Turn on the Bluetooth function of your Bluetooth device.Search the headphones’ Bluetooth signal on your Bluetooth device, and select “S40” to pair it with your Bluetooth device. The Indicator Light slowly flashes blue when the headphones pair successfully.
- if you are asked for the password/PIN code during the pairing procedure, enter “0000” (four zeros).
Pair to The Second Bluetooth Device
- Make sure the headphones have been connected to the first Bluetooth device successfully. And the headphones are not playing music.
- Turn off the first device’s Bluetooth.
- Turn on the second device’s Bluetooth, find the “S40” model name, and select it to pair with your device.
- Turn on the first device’s Bluetooth and select “S40” to pair it again.
Restore factory settingPress and hold the volume up and down buttons simultaneously for 5 seconds to clear the Bluetooth pairing record.
NOTE: bopmen S40 only has one audio channel, if you want to play music from another Bluetooth device, please pause the current device’s music first.
ANC-Active Noise Cancelling :Turn on ANC: Push the ANC button to the “on” side and the ANC Indicator light on green.Turn off ANC: Push the ANC button to the “off ” side and the ANC Indicator turns off.AUX Wired Connection:The headphones support AUX input for wired external audio source connection. Simply Power Off the headphones and plug in the audio cable. (Note: Wired mode is not available when the headphones ran out of battery)NOTE: The buttons and microphone on open S40 will not work when connected as wired headphones.
Collapsible Design
Specification
Indicator Light
- Pairing: Red and blue light flash alternately
- Paired: Blue light flashes
- Playing: Slow flashes blue light
- Charging: Red light on
- Full Charge: Red light turns off
- Battery Low: Red light flashes with voice prompt
- ANC Working: Greenlight turns on
Technical Specification
- Product Name: S40
- Bluetooth Version: V5.0
- Input: 5V/220mA
- Noise Reduction Depth: 20~25dB
- Charging Time: About 2.5 hours
- Using Time 1: 15 hours (ANC+BT)
- Using Time 2: 20 hours (BT only)
- Using Time 3: 40 hours (ANC only)
- Bluetooth Profile: A2DP AVRCP HFP HSP
- Bluetooth Range: 10m/33ft
- Sensitivity: 102+/-3dB
- Impedance: 32Ω
- Driver Diameter: 40mm
- Frequency Response: 20Hz-20kHz
- Net Weight: 230g
Q & A
Q: Why do the headphones not work when using an audio cable?A: If the battery of the headphones is completely dead, it cannot be used in the wired state. Please after charging the headphones for 10 minutes and then use the audio cable to enter wired mode.Q: Why the headphones can’t pair with my mobile phone?A: Please check whether your headphones are in pairing mode or reconnection mode, check if the Bluetooth search function of your Bluetooth device has been turned on. And then go to the Bluetooth menu of your Bluetooth device, delete/forget the headphones, and reconnect the headphones.Q: Why headphones can’t be turned on?A: Please double check battery status of your headphones.Q: Can I replace the battery for the headphones?A: No. these headphones use a built-in nondetachable Li-Polymer battery. It can’t be replaced.Q: Can I use the headphones while driving?A: For your safety, we strongly recommend you to not use headphones to avoid distraction while driving.Q: Why do the headphones sometimes disconnect with Bluetooth devices within 10 meters?A: Please check if there is any metal material within the relatively close range that may interfere with the Bluetooth connection. Because Bluetooth is a radio technology that is sensitive to objects between the headphones and its connected devices.and its connected devices.Q: Why I cannot hear any voice from my computer or mobile phone?A: Please check if the output channel of your computer supports the A2DP profile. And please check the volume of your headphones, as well as your computer/mobile phone.Q: Why am I unable to use the headphones to control the volume of select track of APP on my mobile phone?A: Due to the configuration of different application software, the headphones may not totally compatible with some applications.Q: What can I do if the Bluetooth is crashed?(Cannot close or open)A: Please reset headphone Bluetooth by inserting an audio cable into the audio jack then removing it.Q: Why the Bluetooth is turned off when I use the audio cable to connect?A: This is our special set. All Bluetooth feature buttons stop working and Bluetooth should be turned off when users insert the audio cable into the jack. Don’t worry, the Bluetooth will be available when the audio cable is moved.
Limited Warranty
Please sign up for bopmen warranty service at www.bopmen.combopmen warrants that this product, for a period of 2 years from the date of retail purchase by the original end-user purchaser, when delivered to you in new condition, in original package, from bondsmen authorized reseller and used in normal conditions, is free from any defects in manufacturing and workmanship. We will, at our sole option, repair or replace (using new or refurbished replacement parts) any defective parts within a reasonable period of time and free of charge.24/7 Customer ServiceEmail: [email protected]
What is not Covered?
This warranty does not cover defects resulting from improper or unreasonable use or maintenance; failure to follow operating instructions; accidents; excess moistures; insects; lightning; unauthorized alteration or modification of original condition; damage caused by inadequate packing or shipping procedures; loss of, damage to, or corruption of stored data; damage caused by use with non-bopmen products; a product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved, and/or authorized, or repair of
How to Make a Claim?
In the event damage has occurred to products, you must follow these instructions:
- Contact [email protected] with the order number on the e-commerce website after you discover a product defect (or should have discovered it, if such product defect was obvious);
- In order to get professional solutions for bopmen, please give a detailed explanation of how the damage occurred.
- Return the products. bopmen will, at our sole option, repair or replace (using new or refurbished replacement parts) any defectiveparts within a reasonable period of time and free of charge.
Other Legal rights
This limited warranty gives you specific legal rights, and you also may have other rights that vary from state to state or country to country. Some places do not allow limitations on implied warranties or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions ay not apply to you.
report this ad
References
[xyz-ips snippet=”download-snippet”]