BRAUNABILITY REMOTEQuick guide for A-series
How to install the BraunAbility remote receiver
- Choose placement, either on or near the pump module. Ensure that the Teach-in button on the receiver is easy to access. Mount the receiver in step 4.
- Disconnect the standard handheld control. Connect the supplied adapter cable between the pump module and the standard handheld control.
- Connect the adapter cable to the receiver.
- Mount the receiver according to the illustration using the supplied adhesive pads. In some cases, it might be necessary to drill (5 mm) and use the supplied clips.
Be careful. Check for obstructions to ensure free space before drilling. - Use the supplied cable tie to tidy up the excess cable.
Be careful. Check for obstructions to ensure free space before drilling.
How to set up the BraunAbility Remote app
- Download the BraunAbility Remote app from Google Play or App Store.
- Activate Bluetooth on your smartphone.
- Press the Teach-in button (A) quickly three times in a row and follow the setup wizard in the app.
Before using this device, download and read the user manual available at: www.braunability.eu
BraunAbility Europe ABÅkerivägen 7443 61 Stenkullen SwedenPhone: +46 302 254 00E-mail: [email protected]www.braunability.eu
References
[xyz-ips snippet=”download-snippet”]