CASIO fx-115ES PLUS User Guide

Simply Calculate The Difference!

QUICK START GUIDE

fx-115ES PLUS2nd EDITION

www.casioeducation.com

The following explains the meaning of each mode on the fx-115ES Plus 2nd Edition:

MENU NAME DESCRIPTION
COMP This mode performs general calculations.
COMPLEX This mode performs complex number calculations.
STAT This mode performs statistical and regression calculations.
BASE-N This mode performs calculations involving specific number systems (binary, octal, decimal, 8 hexadecimal).
EON This mode solves equations.
MATRIX This mode performs matrix calculations.
TABLE This mode generates a numerical table based on one or two functions.
VECTOR This mode performs vector calculations.
INFO This mode solves inequalities.
VERIFY This mode verifies a calculation.
DIST This mode performs distribution calculations.

COMP MODE

To calculate and solve basic expressions, press to enter COMP mode.To make any changes to the calculator settings, press(SETUP).Inputting a Fraction & Converting to Decimal Form:
  1. To solve , press
  2. To view the solution as a decimal, press.

Note: press again to see the entire decimal answer. Pressing once more will display the fraction solution again.

To Find the Remainder of a Division Problem:

  1. To find the remainder of 7 divided by 5, press

Absolute Value:

  1. To find the absolute value of -4, press

Exponents:

  1. To evaluate 3⁄4, press

Roots:

  1. To calculate the square root of 25, press
  2. To calculate the cube root of 64, press

Storing Variables:To store a value for any variable, pres followed by a variable, A ­ F. In this example, we will store a value of 1 for the variable A.

  1.  Press

Note: When you store the value for the variable, you do not need to press the key prior to pressing the variable key.

Calculating Expressions:

The key allows you to enter an expression with variables, assign values for each variable and then automatically calculate the expression, without having to store values for the variable first.

  1. Enter the expression, 3A + B, by pressing
  2.  Press
  3. Enter 5 for A by pressing
  4. Enter 10 for B by pressing
  5. The values of A and B can be used to solve additional expressions, without using

Solving Equations (SOLVE): SOLVE uses Newton’s method to approximate the solution of equations. SOLVE can only be used in COMP mode.

Solve y = ax2 + b for x, when y = 0, a = 1, and b = -2.

  1. Enter the equation by pressing
  2. Press (SOLVE) to enter the SOLVE feature.
  3. Enter the value for y by pressing
  4. Enter the value for a by pressing
  5. Enter the value of b by pressing
  6. Enter an initial value for x, for this example, we will enter 1, by pressing
  7. To exit SOLVE, press

STAT MODE

To start a statistical calculation, press to enter STAT mode and use the screen that appears to select the type of calculation you want to perform.

Note: When you want to change the calculation type after entering STAT mode, press(STAT/DIST)1(Type) to display the calculation type selection screen.

Input the following data and find the linear regression.(170, 66) (173, 68) (179, 75)

Entering Data:

  1. To enter the data points above, press
  2. Enter the x-values first, pressing after each value.
  3. Use the arrows to move to the top of the y-column and enter the y-values, pressing after each value.

Finding a Regression:

  1. To find the regression equation, press to clear the screen.
  2. Press to display the Statistics Menu.
  3. Press 5 (Reg) to find the coefficients for the linear regression equation.
  4.  Press 1 (A)to find the value of A.
  5.  To find the value of B, repeat the process. Press
  6. The values of the correlation coefficient (r), the estimated value of X, and the estimated value of Y can also be found.

EQN MODE

Equation Mode can be used to solve simultaneous linear equations with two or three unknowns, quadratic equations, or cubic equations. Pressto enters EQN mode and press the corresponding number for the desired equation type.

  1.  Press 1 to select a simultaneous linear equation with two unknowns.
  2. Enter the coefficients for each term in each equation by pressing
  3. Pressto solves for the variables.
  4. Press to see the solution for y.
  5. To solve additional simultaneous equations with two unknowns, press

Example 2: Solve 2×2 ­ 3x ­ 6 = 0.

  1. To choose a different type of equation to solve, press to return to the initial Equation screen.
  2. Press 3 to select a quadratic equation.
  3. Enter the coefficients of each term and the constant by pressing
  4. Pressto solves for the roots and the minimum.
  5. Press to see the additional information

TABLE MODE

TABLE generates a number table based on one or two functions, entered as f(x) and/or g(x). Press to enter TABLE mode.

Note: Be sure to input the x variable when generating a number table. All other variables will be handled as constants.

  1. Enter the first function by pressing
  2. Enter the second function by pressing
  3. Enter the Start, End, and Step values by pressing

INEQ MODE

INEQ Mode allows you to solve a quadratic inequality or a cubic inequality. Press to enter INEQ Mode and select quadratic or cubic.

Solve x2 + 2x ­ 3 < 0:

  1.  Press 1 to select a quadratic inequality.
  2. Press 2 to select the less than inequality.
  3. Enter the coefficients of each term and the constant by pressing 
  4. Press to display the solution set.

VERIFY MODE

VERIFY Mode allows you to verify whether input equality or inequality is true or false. Press to enter VERIFY Mode.

Note: Pressing will bring up a menu of equality or inequality symbols to use.

report this ad

Verify whether 4√9=12 is true or false:

  1. Enter the equation by pressing 
  2. Pressto sees if the statement is true or false.

Simply Calculate The Difference!

See the complete line of Casio calculatorswww.casioeducation.com

fx-115ES PLUS 2nd Edition Quick Start Guide

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, , ,