HIKVISION AX PRO User Guide

Table of Contents

AX PROQuick Start GuideEN 50131-1:2006+A2:2017EN 50131-3:2009EN 50131-6:2017EN 50131-5-3:2017EN 50131-10:2014EN 50136-2:2013Security Grade(SG)2Environmental Class(EC) II Certifiedby Telefication

APPEARANCE

1. Function Indicator

2. Power Indicator3. Tag Present Area4. Tamper Switch5. Reset Button6. Serial Port

7. Power Interface8. Power Switch9. Network Interface10. SIM Card 2 Slot11. SIM Card 1 Slot12. Serial Port

Note: the SIM card functions vary depending on the model.Note: the SIM card functions vary depending on the model.

WIRING AND POWER ON

SET UP

Add the AX PRO to the Hik-PRO client.
Enroll the peripheral to the AX PRO.

INSTALLATION

Tamper Screw (compulsory)

RESET

Restart the device, the power LED ﬂashes 3 times.
Hold the reset button for 5 s.

User ManualScan the QR code for more information and operation help.

http://enpinfodata.hikvision.com/analysisQR/showQR/91f16b17

Specification

AX PRO
Basic	Parameters	64 Series 96 Series
RF frequency	868Mhz/865Mhz
Wireless zones,Relaymodule & wall switch	lip to 64 ,Up to 96
Wireless tag Reader &keypad, Tag	Up to 8, 32	Up to 8, 48
Wireless Sounders, keyfobs, repeaters	4, 32, 1	6, 48,4
PIR camera	2	4
IP camera integration	0	4 x 7s clips
User	Installer, admin, user	1, 1,30	1,1,46
software	Area	16	32
LEDs indication	Arm/Disarm, Alarm, Tamper, Fault, Cloud, Power
Memory Log stored	5000 5000
Programming tools	HC/HC Pro/Web Portal/IVM54200
Communication	LAN port	Wi-Fi(2.4G), LAN port, GPRS on board	LAN port, Wi-Fi(2.46), 3/4G on board
SIM slot	Single	Dual
Protocal	SIA 09, Con act ID, [SUP
Hardwear	Power supply	100 to 240 VAC
Battery	Built-in onboard Battery, Up to 12 hrs standby
Approvals	EN Grade 2, CE, Rohs/Reach/WEEE
Others	Consumption	100-240V to 50/60Hz, 0.1A-0.064A
Operation Environment	Temperature: -10^°C to 50^°C, Humidity: 10 to 90%
Dimension(W x H x D)	170.0 mm (6.71 x 170.0 (6.7″) mm x 38.6 mm (1.51
Weight	557.5 g(19.7 oz)

About this Manual

The Manual includes instructions for using and managing the Product. Pictures, charts, images, and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to ﬁrmware updates or other reasons. Please ﬁnd the latest version of this Manual at the Hikvision website (https://www.hikvision.com/).Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.and other Hikvision trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE.AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OFSYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITHTHE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILLPROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION, AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANYACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER PREVAILS.

This product and – if applicable – the supplied accessories too are marked with “CE” and comply therefore with the applicable harmonized European standards listed under the RE Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see:www.recyclethis.info2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for speciﬁc battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg).For proper recycling, return the battery to your supplier or to a designated collection point. For more information see:www.recyclethis.info

BATTERY CAUTION

replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types);– disposal of a battery into ﬁre or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;– leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of ﬂammable liquid or gas; and– a battery subjected to extremely low air pressure that may result in an explosion or the leakage of ﬂammable liquid or gas

Chemical burning dangerDo not swallow the battery.Keep new and used batteries away from the children.If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.Risk of explosion if the battery is replaced by an incorrect type.Replacement of a battery with an incorrect type that can defeat a safeguard.Dispose of used batteries according to the instructions and local regulations.If the battery compartment does not close securely, stop using the product and keep it away from children.

report this ad

INSTALLATION CAUTION

The additional force shall be equal to three times the weight of the equipment but not less than 50N. The equipment and its associated mounting means shall remain secure during the installation. After the installation, the equipment, including any associated mounting plate, shall not be damaged.

Legal and Regulatory Informationhttp://enpinfodata.hikvision.com/analysisQR/showQR/7f3238e5